Ferment Better Sale
-
Push-In Pressure Gauge (0-40 psi)
The Push-In Pressure Gauge is the ideal companion for the BlowTie spunding valve (FE960). It comes with an 8 mm (5/16 in.) barb, specifically designed to be compatible with 8 mm Duotight fittings. By pairing this pressure gauge with the BlowTie, you'll be able to easily set your blow off pressure when using the BlowTie for pressure fermentations or pressure transfers. The dial face is triple-scaled to read in psi, bar, and kPa. 8 mm (5/16") push-in barb Rubber coated to protect gauge 0-40 psi / 0-2.5 bar / 0-250 kPa Kegland Part number: KL07696
$9.89
-
Stopper #11-1/2 - With Hole
#11 1/2 natural latex rubber stopper with 3/8 inch hole. Top diameter 63 mm, bottom diameter 50 mm, length 25 mm. 6 stoppers per pound.
$9.49
-
Carboy Handle - Smooth Neck Carboys
Make moving your carboy safer and easier with these Orange Smooth-Neck Carboy Handles! For one handed lifting of empty Smooth Necked (not threads) glass carboys. Fits 3, 5, 6, 6.5 gallon smooth neck carboys.
$9.49
-
Glass Jug w/ Screw Top Finish | Finger Grip Handle | Clear | 1 Gallon | 128 oz
1 gallon glass jug that works well for small batch fermentations of beer, mead, wine and More! Clear glass allows you to monitor fermentation activity as it happens Accepts 38mm screw cap or can be used with a #6 stopper and airlock Great for splitting 5 gallons of wort into small batches to perform yeast experiments Sold individually or in cases of 4 with dividers A handy 1 gallon glass jug that is perfect for a small batch of wine! Our 1 gallon glass jar works great for holding small amounts of wine or mead for aging, small batch fermentation, overflow storage and fermentation experiments. Some Suggested Uses: Use to store excess wine when you press off and have more than you expected. Ferment small batches of mead, sake, fruit wine or anything else that strikes your fancy! Perform yeast experiments - split a batch of beer into five 1 gal batches and ferment them with different yeast strains Uses a #6 stopper. Please Note: DOES NOT INCLUDE LID
$8.99 - $24.99
-
MonsterMesh Strainer for FermMonster Carboys
The MonsterMesh is perfect for adding dry hops to your beer! Keep your dry hopping on a precise schedule by adding them to this mesh sleeve inside the Fermonster Plastic Carboy, then easily pull them out after the desired contact time. This mesh sleeve is custom made for the FerMonster Plastic Carboy. The plastic ring sits inside the neck of the fermenter, and the lid can be secured on top to make an airtight seal. The ring actually holds onto the neck of the FerMonster so there's no risk of the mesh sleeve falling into the carboy. Made from food grade materials, the #50 mesh will not affect the flavor of the beer or wine, and is temperature rated to 122°F. Designed for multiple uses, the MonsterMesh can be cleaned in the dishwasher and sanitized with the sanitizer of your choice. The MonsterMesh can be used alongside the MiniMesh to hold multiple additions. The MonsterMesh will sit on the neck of the carboy, and the MiniMesh can be inserted through the stopper hole in the lid. This way you can have two different infusions starting or stopping at different times.
$8.99
-
Carboy Handle - Threaded Neck Carboys
A new carboy handle in distinctive blue color that fits our threaded neck 6.5 gal carboys.
$8.99
-
CellarScience® Universal Breathable Bung | Plastic Carboys
Secure Fit: Designed with a ridge and gentle taper to prevent slipping or being sucked in, ensuring a reliable seal during use. Self-Sealing Vent: Equipped with vent holes that allow air to escape but prevent it from entering the fermenter. Easy Maintenance: Simple to clean and sanitize, making it highly convenient for repeated use. Replaces stopper sizes #8 and #9 This CellarScience Bung has a ridge to keep it from getting sucked in and self-sealing vent holes to let air out but not in. They have a gentle taper, so they don’t slip out during use. They are also very easy to clean and sanitize. Replaces Stopper Sizes #8, #9 Stopper Measurements: 1.36" x 1.89" (34.5 mm x 48 mm) The flapper stopper protrudes roughly 2.5" from the stopper to allow for easy assembly Other available sizes include the Breathable Carboy Bung and the Breathable Barrel Bung. All three size options can be purchased in one complete bundle with the Breather Bung Pack.
$8.79
-
Carbonation and Line Cleaning Ball Lock Quick Disconnect (QD) Cap - Yellow Plastic
This plastic ball lock cap features soda bottle threads, allowing you to convert a 1 or 2 liter soda bottle into a convenient travel growler. The ball lock is compatible with both gas and beverage disconnects, so you can charge the PET bottle before you leave the house and dispense on the go. Attach 3/16" or 1/4" ID tubing to the barb to serve as your dip tube and you're all set! These caps also work great for quickly and conveniently cleaning your draft lines. Mix up a small batch of line cleaning solution in a soda bottle, attach the ball lock cap, and then connect it to your beverage line. Place a bucket below your tap to catch the cleaning solution and open your faucet. Then simply turn the bottle upside down and squeeze it to push solution through your line and out the faucet. You can also choose to pressurize the bottle first, but squeezing the solution through is just as effective. Fermenting with the FermZilla? This is the same ball lock fitting included with the FermZilla Pressure Kit and it's also compatible with the FermZilla Collection Container. If you use the collection container to add dry hops, attach one of these caps and you'll be able purge the container of oxygen before opening the dump valve to introduce the hops. Attach some tubing and diffusion stone and you can oxygenate your wort through the collection container as well! When using two ball lock caps, we recommend pairing this yellow plastic cap with a red plastic cap so you can easily identify which caps are being used for liquid or gas. The barb is Duotight compatible. If you'd like to use the cap with 8 mm OD EVABarrier tubing, see DUO10. For a stainless steel option see KG50. Specs: Liquid and Gas Ball Lock Compatible Overall Length - 2.5" Barb Length - 7/8" Barb OD - 1/4" Barb ID - 3/16" 28mm PCO 1881 Threads Kegland Part number: KL1078
$8.79
-
Carbonation and Line Cleaning Ball Lock Quick Disconnect (QD) Cap - Red Plastic
This plastic ball lock cap features soda bottle threads, allowing you to convert a 1 or 2 liter soda bottle into a convenient travel growler. The ball lock is compatible with both gas and beverage disconnects, so you can charge the PET bottle before you leave the house and dispense on the go. Attach 3/16" or 1/4" ID tubing to the barb to serve as your dip tube and you're all set! These caps also work great for quickly and conveniently cleaning your draft lines. Mix up a small batch of line cleaning solution in a soda bottle, attach the ball lock cap, and then connect it to your beverage line. Place a bucket below your tap to catch the cleaning solution and open your faucet. Then simply turn the bottle upside down and squeeze it to push solution through your line and out the faucet. You can also choose to pressurize the bottle first, but squeezing the solution through is just as effective. Fermenting with the FermZilla? This is the same ball lock fitting included with the FermZilla Pressure Kit and it's also compatible with the FermZilla Collection Container. If you use the collection container to add dry hops, attach one of these caps and you'll be able purge the container of oxygen before opening the dump valve to introduce the hops. Attach some tubing and diffusion stone and you can oxygenate your wort through the collection container as well! When using two ball lock caps, we recommend pairing this red plastic cap with a yellow plastic cap so you can easily identify which caps are being used for liquid or gas. The barb is Duotight compatible. If you'd like to use the cap with 8 mm OD EVABarrier tubing, see DUO10. For a stainless steel option see KG50. Specs: Liquid and Gas Ball Lock Compatible Overall Length - 2.5" Barb Length - 7/8" Barb OD - 1/4" Barb ID - 3/16" 28mm PCO 1881 Threads Kegland Part number: KL1078
$8.79
-
Glass Fermentation Jar | 1 Gallon | No Lid | 110mm Continuous Thread
Wide mouth jar for small batch fermentations or storing pickled food items Large 4.3" diameter opening 110 mm continuous thread neck (lid not included) 128 oz (1 Gal) capacity Widemouth glass jars are great for fermenting small batches of fruit wines, beer, vinegars, lacto fermented foods, and more. The 110 mm (4-3/8") wide opening is large enough to add product, and to reach your hand in for cleaning. Lids are not included, see our 110 mm plastic lid: JAR01A. 1 gallon widemouth jars are sold individually, and come packed 4 to a case. We suggest buying a case quantity of 4 to reduce the chance of breakage in transit.
$7.99
-
Stopper #12 - Solid
#12 natural latex rubber stopper - solid. Top diameter 64 mm, bottom diameter 54 mm, length 25 mm. 6 stoppers per pound.
$7.99
-
Replacement PRV | Pull Ring Pressure Relief Valve | Red | 35 PSI
Replacement pressure relief valve rated to blow at 35 psi. This is a direct replacement of the PRV featured on the FermZilla and Kegmenter. It is also compatible with homebrew kegs and the KOMOS® CO2 regulator if you desire a lower blowoff pressure.
$7.69
-
CellarScience® Universal Breathable Bung | Glass Carboys
Dual Functionality: Acts as both a stopper and an airlock, allowing CO2 to escape while preventing oxygen and contaminants from entering, ensuring optimal fermentation conditions. Versatile Fit: Compatible with a wide range of containers, including 3, 5, 6, and 6.5-gallon carboys, 1-gallon bottles, growlers, and 500 mL flasks, replacing multiple stopper sizes. Ideal for Wine and Beer Ferments: Breathable stoppers are a popular choice in commercial wineries and perfect for beer fermentation, it creates a vacuum if the wort cools, preventing contamination from water airlocks. A breathable Silicone stopper that acts as both a stopper and an airlock. Unique design allows CO2 pressure to escape but keeps Oxygen and airborne contamination out. This quickly became our stopper of choice for wine, and is a popular style used by numerous commercial wineries. Also has great application for beer ferments: It will create a vacuum if fermenting wort cools (as opposed to pulling water in from your traditional airlock.) Airtight seal is great for extended fermented lager when CO2 production is still present but very slight. Fits 3, 5, 6 & 6.5 gallon glass carboys, 1 gallon bottles, growlers, and 500 mL flasks. Replaces Stopper Sizes #6, #6.5, #7, #8 Stopper Measurements: 0.94" x 1.48" (24 mm x 37.5 mm) The flapper stopper protrudes roughly 2.5" from the stopper to allow for easy assembly Other available sizes include the Universal Breathable Bung and the Breathable Barrel Bung. All three size options can be purchased in one complete bundle with the Breather Bung Pack.
$7.69
-
CellarScience® Silicone Bung | Solid | Glass Carboys
Designed to fit 3 to 6.5-gallon glass carboys and 500ml flasks, making it ideal for a variety of storage needs. Ribbed body and ridge prevent slipping or being sucked in, ensuring a reliable seal during long-term storage. Despite its ribbed design, this silicone bung is easy to clean and sanitize for hassle-free use. Solid Silicone bung that will fit a 3, 5, 6 or 6.5 gallon glass carboy or 500ml flask. A solid stopper is the most reliable way to keep oxygen out for long term storage. This bung has a ridge to keep it from getting sucked in when temperatures cool. It also features a ribbed body it doesn't slip out during use. Even though it isn't perfectly smooth like some other stoppers, it remains easy to clean and sanitize. The top measures 1.5" wide and the bottom is 1.13" wide. While the FE592 carboy stopper is a great, economical choice, you may also want to check out our premium, silicone carboy hood FE496 as well. Working as both a solid or a breathable bung (depending on how the plug is set), the FE496 is like getting two bungs in one!
$7.69
-
MiniMesh Strainer for Vintage Shop PET Carboys & FerMonsters
The MiniMesh is perfect for adding dry hops to your beer! Keep your dry hopping on a precise schedule by adding them to this mesh sleeve inside the PET Carboy, then easily pull them out after the desired contact time. This mesh sleeve is custom made for the Vintage Shop PET Carboy. The plastic ring sits inside the neck of the fermenter with room for a #10 stopper to be inserted for an airtight seal. The ring actually holds onto the neck of the carboy so there's no risk of the mesh sleeve falling into the carboy. Made from food grade materials, the #50 mesh will not affect the flavor of the beer or wine, and is temperature rated to 122°F. Designed for multiple uses, the MiniMesh can be cleaned in the dishwasher and sanitized with the sanitizer of your choice. For FerMonster users, the MiniMesh and MonsterMesh can be used simultaneously. The MonsterMesh will sit on the neck of the carboy, and the MiniMesh can be inserted through the stopper hole in the lid. This way you can have two different infusions starting or stopping at different times.
$7.69
-
CellarScience® Silicone Bung | Solid | Large Barrel
Tapered design fits most oak barrels and variable volume tank lids. Made from easy-to-clean, sanitizable silicone. Provides a tight, leak-proof seal for barrels and tanks. This solid silicone bung from CellarScience will provide a tight fit and secure seal to your oak barrel or variable volume tank lid. Made from pliable silicone for a great seal and is easy to clean and sanitize. Tapered design ensures it will fit most oak barrels as well as the hole in most variable volume lids. Top measures 2.5" including flange, 2.25" excluding flange. Tapers to 1.75" diameter at bottom.
$7.69
-
Lid for 7.9 gal Plastic Bucket (FE357A)
Plastic lid for FE357A. Includes hole and grommet for airlock. Made from Polypropylene. Why Polypropylene? These buckets are made from polypropylene as it is less porous and significantly smoother than other HDPE fermenters. HDPE is porous and can harbor microbial activity making it more difficult to clean and sanitize. Being less porous, polypropylene also does not absorb aroma like HDPE so there is less favour carry over from batch to batch. Kegland Part number: KL01571
$6.59
-
Fermentasaurus Replacement Lid Seal
Fermentasaurus lid o-ring. Will fit either standard or pressure lid
$6.59
-
Rubber Stopper - #13 Solid
#13 stopper - solid. Top diameter 2.64 inches (67 mm), bottom diameter 2.28 inches (58 mm), length 1 inch (25 mm). BPA-free stopper made of food grade materials. Injection molded TPE for superior consistency throughout. Perfect for use with carboys, as the material sticks well to glass and PET, even when wet. Max. Temperature Rating: 158 °F (70 °C).
$6.49
-
Rubber Stopper - #13 With Hole
#13 stopper - with 3/8 inch hole. Top diameter 2.64 inches (67 mm), bottom diameter 2.28 inches (58 mm), length 1 inch (25 mm). BPA-free stopper made of food grade materials. Injection molded TPE for superior consistency throughout. Perfect for use with carboys, as the material sticks well to glass and PET, even when wet. To create a solid stopper, simply use a #000 solid stopper (FE400) to plug the hole. Max. Temperature Rating: 158 °F (70 °C).
$6.49
-
FerMonster Carboy - Lid With Hole
Replacement Lid with hole for all sizes of Fermonster Plastic Carboys. The lid was recently redesigned and reinforced to be stronger and prevent cracking issues reported by customers. The design was also updated to improve how the o-ring sits in the lid. Does not include o-ring.
$5.99
-
FerMonster Carboy - Solid Lid
Solid replacement lid for the all sizes of Fermonster fermenter. Does not include a gasket. Perfect for transporting wort after big brews where it was needed to drive the wort home before fermentation.
$5.99
-
Pop Cultures | Food Fermentation Screen
The Pop Cultures Food Fermentation Screen keeps fermenting vegetables submerged in brine to eliminate the mold that happens when they float to the top and become exposed to air. It was designed to fit in the neck of our 1-gallon glass glass jars. Fill the jar to the top with brine to keep the jar full and veggies submerged. Depending on the length of your fermentation you may top up with a little additional water or brine as required. This ingenious little device replaces glass weights that do not work as well in the 1 gallon jar. It also works well in 24 oz mason jars as it can be folded and inserted through the neck of the jar. Specifications: Material: Food Grade Silicone Fits our 1-gallon and 33 oz glass jars and 24 oz mason jars
$5.99
-
$5.99 - $27.49
-
Lid For Bucket (With Hole for #7 Stopper)
For use with stopper and airlock on 6 gallon bucket. Comes with 1 1/4" hole which fits a #7 or universal stopper. Please Note: Lids are not gasketed and so do not always form a perfect, airtight seal. Not intended for long-term storage.
$5.99
-
Two Hole #6.5 Brewmaster Silicone Stopper
This stopper has two holes and we use it in the production of our #6.5 stopper thermowell. It features one 3/8" hole and one 1/4" hole. A racking tube or stainless tube can be inserted into the 1/4" hole with the aid of some lubrifilm, forming an airtight seal, and the 3/8" hole fits an airlock. Even after you wedge all this junk into it, it still fits a carboy neck! Also fits perfectly into a 1.5" tri-clamp ferrule, and the stopper's flange will ensure it doesn't fall in. Use this in any configuration you can think of, it'll fit: Airlocks, Thermowells, Racking Canes, and anything else you can imagine!
$5.99
-
FerMonster Lid Opener
Got a stuck lid on your Fermonster? Get it open much easier with this specially designed lid opener. It easily slides onto the lid and gives you comfortable hand grips to open a stuck lid. Note: We do not recommend using this tool to tighten the lid because the seal is made by the o-ring and not the pressure between the lid and neck.
$5.99
-
Two Hole #10 Brewmaster Silicone Stopper
This stopper has two holes and we use it in the production of our #10 stopper thermowell. It features one 3/8" hole and one 1/4" hole. A racking tube or stainless tube can be inserted into the 1/4" hole with the aid of some lubrifilm, forming an airtight seal, and the 3/8" hole fits an airlock. Even after you wedge all these fittings into it, it still fits a plastic carboy neck! Use this in any configuration you can think of, it'll fit: Airlocks, Thermowells, Racking Canes, and anything else you can imagine!
$5.99
-
Plastic Spigot With 1/2 in barb
Plastic spigot for PET carboys, plastic buckets, and other containers. Features a barbed spout which will accept 1/2 inch ID tubing. Use the barb to extend tubing into your receiving container, or attach a spring tip bottle filler for an easy bottling solution.
$5.99
-
Glass Fermentation Jar | 1 Gallon | Lid Included | 100mm Lug Finish
Wide mouth jar for small batch fermentations or storing pickled food items Large 3.9" diameter opening 100-2055 Lug Finish neck with metal lid included 128 oz (1 Gal) capacity Widemouth glass jars are great for fermenting small batches of fruit wines, beer, vinegars, lacto fermented foods, and more. The 100 mm (3.9") wide opening is large enough to add product, and to reach your hand in for cleaning. 100 mm lug finish metal lids included (FE309A). These jars have a lug finish.
$5.79
-
Lid for Plastic Bucket (Without Hole)
For modifying yourself when making a fermenter or a lid for a grain storage container. Note: This lid is not an air tight seal. There is no gasket in this lid.
$5.19
-
Silicone Stopper | 32mm x 48mm | With Hole
This versatile silicone bung is made from a food-grade, lead-free material, making it ideal for use with all food and beverages. Dimensions: Tapered Diameter: 32mm to 48mm (1.25" to 1.88") Hole Diameter: 9mm (0.35") KegLand Part Number: KL12836
$4.99
-
Farro Glass Wide Mouth Glass Carboys | Replacement Lid
Replacement lid for Farro Glass wide mouth glass carboys. Screw cap covers a 1" hole which will accept a #5 stopper for installing an airlock. Made from polypropylene.
$4.99
-
Glass Fermentation Jar | 1 Gallon | No Lid | 100mm Lug Finish
Wide mouth jar for small batch fermentations or storing pickled food items Large 3.9" diameter opening 100-2055 Lug Finish neck (lid not included) 128 oz (1 Gal) capacity Widemouth glass jars are great for fermenting small batches of fruit wines, beer, vinegars, lacto fermented foods, and more. The 100 mm (3.9") wide opening is large enough to add product, and to reach your hand in for cleaning. Lids are not included, see our 100 mm lug finish metal lids: FE309A. 1 gallon widemouth jars are sold individually, and come packed 4 to a case. We suggest buying a case quantity of 4 to reduce the chance of breakage in transit. Please note: the example image shows a unit with continuous threads. These jars have a lug finish.
$4.99
-
1 Gallon Plastic Jar - 110 mm Wide Mouth - No Lid
Wide mouth plastic tub in "natural" opaque white color. Opening is 110 mm wide. Lids are sold separately, see item JAR01A. Holds 1 gallon, or 12 pounds of liquid malt extract (LME). Sold individually, packed in cases of 4. 192 each per pallet.
$4.99
-
Rubber Stopper - #11 With Hole
#11 stopper - with 3/8 inch hole. Top diameter 2.17 inches (55 mm), bottom diameter 1.89 inches (48 mm), length 1 inch (25 mm). BPA-free stopper made of food grade materials. Injection molded TPE for superior consistency throughout. Perfect for use with carboys, as the material sticks well to glass and PET, even when wet. To create a solid stopper, simply use a #000 solid stopper (FE400) to plug the hole. Max. Temperature Rating: 158 °F (70 °C).
$4.99
-
Universal Rubber Stopper - Size #11-11.5 (Solid)
Universal stoppers have a longer taper to help produce a better fit and a snug seal, and a lip which prevents them from falling into your container. Available with a 3/8 inch hole for an airlock, or solid with no hole. #11-11.5 (large) size is recommended for full size barrels and 14 gallon demijohns.
$4.99
-
Universal Rubber Stopper - Size #11-11.5 (With Hole)
Universal stoppers have a longer taper to help produce a better fit and a snug seal, and a lip which prevents them from falling into your container. Available with a 3/8 inch hole for an airlock, or solid with no hole. #11-11.5 (large) size is recommended for full size barrels and 14 gallon demijohns.
$4.99
-
Rubber Hood - Fits Italian (Threaded) 6.5 Gallon Carboy
Natural rubber hood for jubs and carboys. Features 3/8 inch hole for airlocks.
$4.99
-
Rubber Carboy Hood
A great carboy hood for a real snug fit. Fits our 3, 5, and 6 gallon glass carboys. Will also fit over our 5 and 6 gallon plastic carboys. Ideal to use if you have a real active fermentation. Add 3' of 1/2" racking tubing to your 3-piece airlock. Take out the bubbler piece to assemble into a blow-off setup.
$4.99
-
Carboy Blow Off Hood (Smooth Neck Carboy Cap)
So much easier than a bung! Rubber Carboy Blow Off Hood with two attachments for vinyl blow off hoses (3/8" or 1/2"). Fits our 3, 5, 6, or 6.5 gallon glass carboys with smooth necks. Can also be used on 5 and 6 gallon plastic carboys. TIP: Carboy hoods are exceptionally useful for blowoff tubes. Just add 3' of 1/2" racking tubing into a bucket of water as your airlock.
$4.79
-
Rubber Stopper - #11 Solid
#11 stopper - solid. Top diameter 2.17 inches (55 mm), bottom diameter 1.89 inches (48 mm), length 1 inch (25 mm). BPA-free stopper made of food grade materials. Injection molded TPE for superior consistency throughout. Perfect for use with carboys, as the material sticks well to glass and PET, even when wet. Max. Temperature Rating: 158 °F (70 °C).
$4.69
-
Rubber Stopper - #10 With Hole
#10 stopper - with 3/8 inch hole. Top diameter 2 inches (51 mm), bottom diameter 1.66 inches (43 mm), length 1.10 inch (28 mm). BPA-free stopper made of food grade materials. Injection molded TPE for superior consistency throughout. Perfect for use with carboys, as the material sticks well to glass and PET, even when wet. To create a solid stopper, simply use a #000 solid stopper (FE400) to plug the hole. Max. Temperature Rating: 158 °F (70 °C).
$4.49
-
Plastic Spigot For Bucket
This Spigot can be easily installed onto any bucket for added convenience. Drill a 1" hole and install in bucket with the gasket against the exterior of the bucket. Spigot uses 3/8 in ID tubing.
$4.49
-
Lid For Bucket (With Hole for #6 Stopper)
For use with stopper and airlock on 6 gallon bucket. Comes with 1 3/8" hole which fits a #6 or universal stopper. Please Note: Lids are not gasketed and so do not always form a perfect, airtight seal. Not intended for long-term storage.
$5.99 $4.48
-
Replacement Gaduation Sticker for 60L FermZilla All Rounder Easy-Grip Fermenter
Replacement Graduation Sticker for 30L FermZilla Easy-Grip All Rounder. Kegland Part Number: KL50876
$4.39
-
Replacement Gaduation Sticker for 30L FermZilla All Rounder Easy-Grip Fermenter
Replacement Graduation Sticker for 30L FermZilla Easy-Grip All Rounder. Kegland Part Number: KL50869
$4.39
-
Replacement Graduation Sticker for 60L FermZilla All Rounder
Replacement Graduation Sticker for 60L FermZilla All Rounder. Kegland Part number: KL15240
$4.39
You have seen 192 out of 258 products