Replacement saturation hose for the QuickCarb™ beer carbonator. Includes 6 feet of hose with a 1/4” swivel nut installed on one end and a 1/2” QuickConnector™ nut installed on the other end.
This is a replacement seal kit for all Blichmann BoilerMaker Brew Kettles. We recommend purchasing a seal kit when you purchase a BoilerMaker as they're relatively inexpensive, and are great to have on hand if you have a leak on brew day!
Using an electric Recirculation Infusion Mash System heater to heat your mash is one of the safest and most energy-efficient ways to get your brew to the perfect temperature, and the Blichmann RIMS-Rocket is one of the most popular models on the market today. This innovative heater is designed especially for use with the popular Blichmann HopRocket™ canister, and to install it all you have to do is secure it inside of the canister, plug it in, and monitor the temperature. The RIMS-Rocket operates with 2000 W, 120V and ultra low watt density in order to perform optimally in your RIMS system. It features a "plug and play" 12-foot long factory wired cable with a molded twist-lock L6-30P plug on one end and a removable plug on the other end, making it easy to clean because there are no dangling cords attached to the side of your heater. Best of all, the ultra low watt density ensures that you’ll never scorch your mash during the heating process! Features: The RIMS-Rockettm heating element is 2000 W, 120V, ultra low watt density and is engineered to perform optimally in your RIMS system Removable custom engineered plug means cleaning is a snap - no dangling power cord tethered to your heater and the terminal pins are spray-down capable! The RIMS-Rockettm heater assembly clamps right into our HopRockettm canister for added versatility and lower cost. The RIMS-Rockettm includes a "plug and play" 12ft factory wired cable with a molded twist-lock L6-30P plug on one end, and our custom removable plug on the other end. Less than Ultra low watt density means NO chance of scorching, and dry-fire capable (although we certainly don't recommend this!) Please note: mounting bracket sold separately.
Using an electric Recirculation Infusion Mash System heater to heat your mash is one of the safest and most energy-efficient ways to get your brew to the perfect temperature, and the Blichmann RIMS-Rocket is one of the most popular models on the market today. This innovative heater is designed especially for use with the popular Blichmann HopRocket™ canister, and to install it all you have to do is secure it inside of the canister, plug it in, and monitor the temperature. The RIMS-Rocket operates with 3500 W, 240V and ultra low watt density in order to perform optimally in your RIMS system. It features a "plug and play" 12-foot long factory wired cable with a molded twist-lock L6-30P plug on one end and a removable plug on the other end, making it easy to clean because there are no dangling cords attached to the side of your heater. Best of all, the ultra low watt density ensures that you’ll never scorch your mash during the heating process! Features:
The RIMS-Rockettm heating element is 3500 W, 240V, ultra low watt density and is engineered to perform optimally in your RIMS system Removable custom engineered plug means cleaning is a snap - no dangling power cord tethered to your heater and the terminal pins are spray-down capable! The RIMS-Rockettm includes a "plug and play" 12ft factory wired cable with a molded twist-lock L6-30P plug on one end, and our custom removable plug on the other end. Less than Ultra low watt density means NO chance of scorching, and dry-fire capable (although we certainly don't recommend this!) Please note: mounting bracket sold separately.
The RipTide™ (Tri-Clamp model only) has been taken to the next level with a design modification to be the ultimate work horse. Now it eliminates the easy-to-loose thrust washer and showcases a PRV vent barb that will allow for mess free priming. This version will improve the overall brewing experience and operation. Again, this change is currently only on the TC RipTide™.
Gone are the days of making do with a general purpose pump such as the March 815 and all the variant imported copies. These pumps are cumbersome to disassemble, difficult to prime to get the wort moving, require the addition of a valve, a switch, and a proper base to hold the pump upright. They also use noisy open motors that must be shielded from liquids. All undesireable attributes for a homebrewing pump! The team of homebrewers at Blichmann Engineering and our friends at March Manufacturing have created the RipTide™ to solve all of these problems!
High performance curved blade impeller and strong rare earth magnets deliver 7 GPM and up to 21ft of head pressure!
Carbon Fiber Dry Run Protection increases the life of your impeller and resists damage during accidental dry runs
Tri-clamp head connection fully disassembles in seconds for easy cleaning
1.5" tri-clamp inlet and outlet connections
Totally enclosed motor is splash proof and super quiet (50 dB)
Integral linear flow valve for superior flow control - don't spend more money for a separate valve and fittings.
Integral air vent valve and partially enclosed impeller design allows you to prime the pump in seconds - no more frustrating air locked pumps!
Stainless steel head rotates 360 degrees to fit in virtually any installation
Large stable base with protective rubber feet keeps the pump from tipping
Convenient power switch on the base
Includes a 10ft long cord with plug (120V)
Base acts as a cord wrap for convenient storage
Assembled in USA from USA and imported components
Imagine a brewing pump that eliminates cavitation, is easy to clean, has a built in valve, and is quiet. Introducing The RipTide pump from Blichmann, the first pump designed specifically for homebrewing.
We love this brew pump. Like a brewer wired on coffee, let us rattle off some of our favorite features. First, the pull style relief valve that allows air to exit the pump head so the impeller won't cavitate is a genius addition. Our next favorite feature is the bad-ass, built-in flow control valve so you don't have to add additional ball-valves. While we dont manually clean our pumps very often we like the idea that we can easily do that with the clover clamp style connection. That might be particularly important if you are transferring cool wort where extra sanitation might make a difference. Equally cool is the noise, or lack thereof, when operating. It just wears on you to hear your pump grinding away all day. The RipTide pump isn't silent, but it is much quieter. And to top it all off we like the mounting base and the extra long 3 m cord. 3 m gets the plug connection a few meters away from where we are brewing and less likely to be exposed to water - a simple upgrade that is really nice. Oh, and we almost forgot the power switch which is always a nice feature on something electric!
All in all this is a no brainer upgrade for the difference in cost.
Features:
Strong rare earth magnets and a curved blade impeller provide 22 L/M and up to 6.5M of pressure head!
Tri-Clamp head disassembles easily for cleaning
1.5" tri-clamp inlet and outlet
Motor is enclosed in a splash proof and super quiet case
Rotatable stainless steel head
Integrated air release vent allows you to easily prime the pump everytime without those frustrating air bubbles and cavitation
Linear flow valve provided for excellent flow control
Power switch on base
3 m long power cord with 230V plug
Intended for European market users. This unit operates at 50 Hz frequency.
Stop lifting buckets, kettles, and fermenters or relying on gravity for transfers!
Brew pumps unlock a world of brewing processes otherwise unavailable—create a return loop for whirlpooling in kettle during post boil hop additions
Stainless steel pump head comes standard—the ideal choice for attaching quick disconnects, camlocks, and other stainless fittings
Built-in flow control valve allows for direct flow adjustment on the pump head and eliminates the need to add an additional ball valve
Corny keg style pull ring PRV makes it easy to bleed the pump head of air bubbles and prime the pump
Tri-clamp pump head can be rotated to your preferred orientation and disassembles quickly for cleaning between uses
Imagine a brewing pump that eliminates cavitation, is easy to clean, has a built in valve, and is quiet. Introducing The RipTide pump from Blichmann Engineering, the first pump designed specifically for homebrewing.
We love this brew pump. Like a brewer wired on coffee, let us rattle off some of our favorite features. First, the pull style relief valve that allows air to exit the pump head so the impeller won't cavitate is a genius addition. Our next favorite feature is the bad-ass, built-in flow control valve so you don't have to add additional ball-valves. While we dont manually clean our pumps very often we like the idea that we can easily do that with the clover clamp style connection. That might be particularly important if you are transferring cool wort where extra sanitation might make a difference. Equally cool is the noise, or lack thereof, when operating. It just wears on you to hear your pump grinding away all day. The RipTide pump isn't silent, but it is much quieter. And to top it all off we like the mounting base and the extra long 9' cord. 9' gets the plug connection a few feet away from where we are brewing and less likely to be exposed to water - a simple upgrade that is really nice. Oh, and we almost forgot the power switch which is always a nice feature on something electric!
All in all this is a no brainer upgrade for the difference in cost.
Features:
Strong rare earth magnets and a curved blade impeller provide 7 GPM and up to 21 ft of lift
Tri-Clamp head disassembles easily for cleaning
1/2" NPT inlet and outlet
Motor is enclosed in a splash proof and super quiet case
Rotatable stainless steel head
Integrated air release vent allows you to easily prime the pump everytime without those frustrating air bubbles and cavitation
Linear flow valve provided for excellent flow control
Power switch on base
10 ft. long power cord with 120V plug
Imagine a brewing pump that eliminates cavitation, is easy to clean, has a built in valve, and is quiet. Introducing The RipTide pump from Blichmann, the first pump designed specifically for homebrewing.
We love this brew pump. Like a brewer wired on coffee, let us rattle off some of our favorite features. First, the pull style relief valve that allows air to exit the pump head so the impeller won't cavitate is a genius addition. Our next favorite feature is the bad-ass, built-in flow control valve so you don't have to add additional ball-valves. While we dont manually clean our pumps very often we like the idea that we can easily do that with the clover clamp style connection. That might be particularly important if you are transferring cool wort where extra sanitation might make a difference. Equally cool is the noise, or lack thereof, when operating. It just wears on you to hear your pump grinding away all day. The RipTide pump isn't silent, but it is much quieter. And to top it all off we like the mounting base and the extra long 3 m cord. 3 m gets the plug connection a few meters away from where we are brewing and less likely to be exposed to water - a simple upgrade that is really nice. Oh, and we almost forgot the power switch which is always a nice feature on something electric!
All in all this is a no brainer upgrade for the difference in cost.
Features:
Strong rare earth magnets and a curved blade impeller provide 22 L/M and up to 6.5M of pressure head!
Tri-Clamp head disassembles easily for cleaning
1/2" NPT inlet and outlet
Motor is enclosed in a splash proof and super quiet case
Rotatable stainless steel head
Integrated air release vent allows you to easily prime the pump everytime without those frustrating air bubbles and cavitation
Linear flow valve provided for excellent flow control
Power switch on base
3 m long power cord with 230V plug
Intended for European market users. This unit operates at 50 Hz frequency.
The Sanke Keg Coupler is designed to fill and wash kegs that use an American Sankey D System type valve. It features a full stainless steel body and probe, is resistant to chemicals, and won’t wear down or chip away like chrome-plated brass. Inlet and outlets are larger than standard couplers and use 1/2″ barb connections. Does not include a pressure relief valve (PRV) for sanitary purposes.
The Blichmann Engineering™ Spunding Valve is purpose-built for pressure fermentation. With exacting precision, you’ll turn out lager-like beer at ale temperatures in no time! Pressurized fermentation is a great option for creating lager-like flavor profiles at room temperature, without the hassle of temperature control. And you’ll complete your fermentations faster and easier. The Blichmann Engineering™ Spunding Valve is purpose built for homebrewers to control your pressures with exacting precision. Research by Blichmann Engineering™ and White Labs shows significant reduction of esters (fruity flavors found in most ales) and low levels of diacetyl, by fermenting under pressure. Key Features:
Ferment under pressure to produce clean, low ester, lager-like beers Extremely fine adjustments from 0 to 35 psi, and superb pressure stability Suitable for vessels up to 42 gal (1BBL batch size) Perfect for naturally carbonating your beers Use for counter-pressure transfers Integral blow-off barb fitting adds a visual indication of fermentation if desired NPT model is perfect for the Blichmann Engineering™ Cornical™ Unitank (BL275) Also available in T.C. model (BL152)
The Blichmann Engineering™ Spunding Valve is purpose-built for pressure fermentation. With exacting precision, you’ll turn out lager-like beer at ale temperatures in no time! Pressurized fermentation is a great option for creating lager-like flavor profiles at room temperature, without the hassle of temperature control. And you’ll complete your fermentations faster and easier. The Blichmann Engineering™ Spunding Valve is purpose built for homebrewers to control your pressures with exacting precision. Research by Blichmann Engineering™ and White Labs shows significant reduction of esters (fruity flavors found in most ales) and low levels of diacetyl, by fermenting under pressure. Key Features:
Ferment under pressure to produce clean, low ester, lager-like beers Extremely fine adjustments from 0 to 35 psi, and superb pressure stability Suitable for vessels up to 42 gal (1BBL batch size) Perfect for naturally carbonating your beers Use for counter-pressure transfers Offered in ½” NPT and Tri-clamp models for the ultimate in adaptability Integral blow-off barb fitting adds a visual indication of fermentation if desired Tri-Clamp model is ideal for most pressure fermentors with T.C. fittings Also available in NPT model (BL151)
Our Spunding Valve Pressure Gauge replaces your worn or damaged spunding valve gauge. Built for accuracy and durability, this high-quality component ensures precise pressure control during fermentation. It’s easy to install, fits standard spunding valves, and helps maintain consistent performance in your brewing setup. A must-have for homebrewers and pros who demand reliable pressure monitoring.
The Blichmann Stainless Steel QuickConnectors are great for a number of different reasons! Not only do they work with all 1/2" NPT (extremely universal), they also come in multiple different sizes and configurations.
Stainless steel and silicone construction
High temp silicone grip provides a cool touch even with hot liquids!
Ribbed grips allow quick comfortable tool-free operation
Silicone o-ring seal is retained for perfect positioning but is easily cleaned or replaced
Adapts all male 1/2" NPT fittings to 1.5 in. TC
The Blichmann Stainless Steel QuickConnectors are great for a number of different reasons! Not only do they work with all 1/2" NPT (extremely universal), they also come in multiple different sizes and configurations.
Stainless steel and silicone construction
High temp silicone grip provides a cool touch even with hot liquids!
Ribbed grips allow quick comfortable tool-free operation
Silicone o-ring seal is retained for perfect positioning but is easily cleaned or replaced
Adapts all male 1/2" NPT fittings to 1/2 in. TC
