Wine Making Hardware
Shop by collection
-
Stainless Bushing - 3/8 in. x 1/2 in. BSP
3/8" female x 1/2" male BSP reducing bush. Made from 304 stainless steel. Kegland Part Number: KL06576
$3.29
-
Rubber Stopper - #7.5 With Hole
#7.5 stopper - with 3/8 inch hole. Top diameter 1.5 inches (39 mm), bottom diameter 1.22 inches (31 mm), length 1 inch (25 mm). BPA-free stopper made of food grade materials. Injection molded TPE for superior consistency throughout. Perfect for use with carboys, as the material sticks well to glass and PET, even when wet. To create a solid stopper, simply use a #000 solid stopper (FE400) to plug the hole. Max. Temperature Rating: 158 °F (70 °C).
$2.59
-
Reinforced Vinyl Tubing | 1" ID
Use this reinforced vinyl tubing any place in your brewing system where you want an added layer of protection from tubing failure. This 1" ID Reinforced Vinyl Tubing is food-grade approved up to 158°F. It is often used in a in a brewing system where higher pressures will be used or for commercial applications. Because it is reinforced, it is less flexible than standard vinyl tubing. Tubing has a max working pressure of 125 PSI. Reinforced vinyl tubing. FDA & 3-A Sanitary certified for beverage and dairy processing. Inner Diameter (ID): 1" (25.4mm) Outer Diameter (OD): 1.35" (34.4mm) Working Pressure: 125 PSI Weight: 0.33 lbs/ft
$25.99 - $407.99
-
Vinyl Transfer Tubing | Flexible | Racking | 5/8 in. ID | 7/8 in. OD
FDA approved food grade tubing for transferring liquids. Made of Vinyl (PVC). Will not impart flavors or odors into your product. Thick wall tubing is recomended for pumping and pressurized systems. For siphoning and transferring liquids, see our thin wall and transfer tubing.
$7.89 - $115.49
-
Stainless Compression Fitting - 1/2 in. x 1/2 in. MPT
When you want to customize your own setup, it’s good to have the right fitting on hand. This stainless steel compression fitting gives you the versatility to put your setup together in the way that works best for you. 304-Type Stainless Steel compression fitting. 1/2" Comp. x 1/2" MPT
$19.99
-
Tri-Clamp 90 Elbow (2")
304-type polished stainless. A set of "elbows" is great for connecting hoses to a pump so they run parallel to each other. With 2" and 3" hose, this dramatically reduces the space needed to allow the pump to pass. In addition, having the lines run parallel makes the pump more agile when moving around the winery when connected.
$25.49
-
Brass Hose Fittings - Male Hose x 1/2 in. MPT
Useful Part for adapting Garden Hose Thread to standard NPT. Male Garden Hose Thread with 1/2" MPT on the other side.
$7.99
-
ForgeFit® Stainless Tri-Clamp Sight Glass | 2"
Keep an eye on the flow during transfer or monitor yeast activity during fermentation with this 2" tri-clamp sight glass. Place the sight glass in-line when you transfer wort from kettle to fermenter to help you oversee how your in-line oxygenator is flowing. One of the few disadvantages of a stainless steel conical is that you can't watch the yeast as they go to work. With a sight glass you'll be able to observe how your yeast are performing throughout the fermentation process. This also makes for a great way to harvest yeast. Simply attach it to your dump valve and close off the other end with a T.C. end cap, collect the yeast and remove the sight glass, cap it at the other end and store it for your next batch. 2" tri-clamp Approximately 6.5" long Made from 304 stainless steel ForgeFit® is a brand of rugged, high-quality fittings made from certified 304 stainless steel. Each fitting is backed by our 60-day no-hassle return policy and a one-year warranty from MoreBeer!.
$92.49
-
ForgeFit® Stainless Butterfly Valve | 1.5" T.C.
If you want to use the absolute best style of valve available to homebrewers, the butterfly valve is the clear choice. Brewers love butterfly valves because they are far and away the most sanitary option. Regular ball valves can trap small amounts of wort inside them, which inevitably leads to an infection that can sour your beer. That's why we always recommend breaking down your ball valves and cleaning them between uses. Butterfly valves have virtually nowhere for contaminants to hide and are easily cleaned in place. They also can be taken apart for a deeper cleaning if desired, although it's rarely necessary. This 1.5" Tri-Clamp Butterfly Valve features stainless steel construction and 7-position handle. The stainless steel handle can be rotated 180° for right or left hand operation. 1.5" tri-clamp Stainless steel handle 7 locking positions Squeeze trigger locking handle Made from 304 stainless steel ForgeFit® is a brand of rugged, high-quality fittings made from certified 304 stainless steel. Each fitting is backed by our 60-day no-hassle return policy and a one-year warranty from MoreBeer!.
$74.49
-
Stainless Bushing - 1/2 in. x 3/4 in. BSP
1/2" female x 3/4" male BSP reducing bush. Made from 304 stainless steel. Kegland Part Number: KL06583
$4.99
-
ForgeFit® Stainless Tri-Clamp Rotating Racking Arm | 2"
Stop leaving clean, perfectly good, wine or beer in your tank and always drain from the perfect height with our tri-clover style rotating racking arms. Remove your existing tri-clamp butterfly valve and place this rotating racking arm between the tank and your valve. When it is time to rack off slightly loosen the clamp nearest the tank and use the built-in handle to rotate to just about the lees level. A white rotatable gasket is placed between the welded in tank fitting and this rotating arm. Because the micro finish of the gasket is hard and slippery it allows the rotating arm to rotate in place. A standard black EPDM gasket is placed between the rotating arm and the butterfly valve and is always kept completely tightened. The length of the arm after the elbow is 14" allowing you to draw from roughly 10" above or below the valve level. The arm measures 13.5" from the TC fitting to the elbow. We suggest you assemble the rotating arm and butterfly valve in such a way that the arm is pointed in the same direction as the handle on your butterfly valve. In this manner you always know how the racking arm is positioned in your tank. 2" tri-clamp Polished finish Made from 304 stainless steel ForgeFit® is a brand of rugged, high-quality fittings made from certified 304 stainless steel. Each fitting is backed by our 60-day no-hassle return policy and a one-year warranty from MoreBeer!.
$234.99
-
Rubber Stopper - #11 Solid
#11 stopper - solid. Top diameter 2.17 inches (55 mm), bottom diameter 1.89 inches (48 mm), length 1 inch (25 mm). BPA-free stopper made of food grade materials. Injection molded TPE for superior consistency throughout. Perfect for use with carboys, as the material sticks well to glass and PET, even when wet. Max. Temperature Rating: 158 °F (70 °C).
$4.69
-
Stainless Tri-Clamp | 2" T.C. x 3/4" Female BSP
Convert 3/4" BSP fittings to 2" tri-clamp. Made from 304 stainless steel. BSP vs. BSPP BSP (or BSPT) fittings have a tapered thread and require teflon tape to form a seal between the male and female fitting. BSP fittings are generally intended to be used with their counterpart of the same thread type. ONLY 1/2" BSP fittings are compatible with US-standard NPT fittings of the same size. BSPP fittings, on the other hand, have a straight thread, require a gasket seated inside the female fitting to form a seal, and are not compatible with NPT. Kegland Part Number: KL10641
$16.49
-
CellarScience® Universal Breathable Bung | Plastic Carboys
Secure Fit: Designed with a ridge and gentle taper to prevent slipping or being sucked in, ensuring a reliable seal during use. Self-Sealing Vent: Equipped with vent holes that allow air to escape but prevent it from entering the fermenter. Easy Maintenance: Simple to clean and sanitize, making it highly convenient for repeated use. Replaces stopper sizes #8 and #9 This CellarScience Bung has a ridge to keep it from getting sucked in and self-sealing vent holes to let air out but not in. They have a gentle taper, so they don’t slip out during use. They are also very easy to clean and sanitize. Replaces Stopper Sizes #8, #9 Stopper Measurements: 1.36" x 1.89" (34.5 mm x 48 mm) The flapper stopper protrudes roughly 2.5" from the stopper to allow for easy assembly Other available sizes include the Breathable Carboy Bung and the Breathable Barrel Bung. All three size options can be purchased in one complete bundle with the Breather Bung Pack.
$8.79
-
Reinforced Vinyl Tubing | 3/4" ID
Reinforced vinyl tubing is the ideal beer tubing option for transferring your homebrew that is below 158°F, and is also great for water applications (such as to and from your wort chiller). This food grade 3/4 in ID Reinforced Vinyl Tubing is rated to 158°F and 150 PSI. Use this tubing anywhere you want the extra security that your tubing will not kink, or burst. This type of tubing is essential when putting back pressure on a system. Standard Vinyl tubing and Silicone are great for their own purposes, but are not designed to handle pressure, and can balloon up or explode if too much pressure is used. Reinforced vinyl tubing. FDA & 3-A Sanitary certified for beverage and dairy processing. Inner Diameter (ID): 3/4" (19.1mm) Outer Diameter (OD): 1.03" (26.2mm) Working Pressure: 150 PSI Weight: 0.20 lbs/ft
$16.99 - $264.99
-
Plastic Barb - 1/4 in. x 1/2 in. MPT
Plastic 1/4" barb with 1/2" male thread. This is the same barb we use on our Beer and Wine Filter Kit (FIL40).
$1.99
-
ForgeFit® Tri-Clamp Gasket | Silicone | 2.5"
Silicone gaskets have a much wider temperature range than EPDM gaskets and are recommended for hot side applications. They are less resistant to acids and caustic chemicals, and may show signs of wear faster than EPDM gaskets. For 2.5" tri-clamp fittings Made from Silicone Temperature rated from -58°F to 446°F ForgeFit® is a brand of rugged, high-quality fittings made from certified 304 stainless steel. Each fitting is backed by our 60-day no-hassle return policy and a one-year warranty from MoreBeer!.
$3.49
-
ForgeFit® CIP Spray Ball - 1.5 in. T.C.
This clean in place spray ball is designed to attach to an independent CIP pipe inside a conical fermenter or brite tank. We recommend using it with a pump capable of 29 psi or higher. 1.5" tri-clamp Made from 304 stainless steel ForgeFit® is a brand of rugged, high-quality fittings made from certified 304 stainless steel. Each fitting is backed by our 60-day no-hassle return policy and a one-year warranty from MoreBeer!.
$41.49
-
Brass Hose Fittings - Hose Washer
This is a gasket / washer for 3/4 gaden hose fittings.
$0.49
-
Stainless - 1/4" Ball Valve Full Port
Our Ball Valves will last for years. Easy to clean. High grade 304-stainless made to last. 1/4" FPT on input and output side. TIP: You can take a ball valve apart using two crescent wrenches. This will allow you to open up the valve to get to the ball and two gaskets that form the seal when closed. Here at MoreFlavor! we think this ball valve is actually easier to clean than 3-piece ball valves (such as our H602D).
$16.49
-
Stainless Compression Fitting - 3/8 in. x 1/2 in. MPT
A great way to set up a homemade Mash Tun. These fittings are designed to thread into the inside of a bulkhead fitting, and clamp down on a copper or stainless tube to allow for a hard-plumbed false bottom! Simply thread the fitting into your bulkhead, loosen the nut, and slide your tubing in! Tightening down the nut with tubing inside will clamp the internal locking mechanism onto your metal tube, creating a seal, and insuring a happy mash tun, happy beer, and happier drinkers! 304-Type Stainless Steel compression fitting. 1/2" Male Pipe Thread with a 3/8" compression fitting on the other side.
$16.49
-
Stainless Hollow Plug - 1/2 in. MPT
Keep this plug on hand for anytime you want to remove an accessory from your equipment, but don’t want to be left with an open hole. Stainless 1/2 in MPT Plug. Hollow behind the threads.
$6.59
-
Stainless Tri-Clamp - 1 in. FPT x 1.5 in. T.C.
Convert 1.5" Tri-Clover to 1" Female Pipe Thread. 304-type stainless steel.
$21.99
-
Rubber Stopper - #13 With Hole
#13 stopper - with 3/8 inch hole. Top diameter 2.64 inches (67 mm), bottom diameter 2.28 inches (58 mm), length 1 inch (25 mm). BPA-free stopper made of food grade materials. Injection molded TPE for superior consistency throughout. Perfect for use with carboys, as the material sticks well to glass and PET, even when wet. To create a solid stopper, simply use a #000 solid stopper (FE400) to plug the hole. Max. Temperature Rating: 158 °F (70 °C).
$6.49
-
Vinyl Beverage Tubing | Rigid | Draft Line | 5/16 in. ID | 9/16 in. OD
Use this size for gas line applications. Also used for long draw beer lines over 25'. Technical Specifications: 5/16" line provides .40 lbs of restriction per foot. Ideally pounds of resistance should equal pounds of applied pressure. 5/16" line holds 1/2 of an ounce per foot. Made from PVC.
$2.19 - $72.49
-
Ultra Barrier™ PVC Free Beer Tubing - 5/16 in.
EJ Beverage Ultra Barrier™ tubing from EJ Beverage is constructed of a unique compound that provides for an excellent alternative to PVC. Advantages to this unique tubing are: PVC Free and BPA Free - containes no DEHP phthalates or other plasticizers Environmentally friendly production - does not emit dioxins Proven to have no significant impact on taste or flavor Extremely low extractables/leachables High flexibility Remains flexible at lower temperatures Ultra-low permeability Superior Barrier properties Temperature range of -40 to 125° F Working pressure of 52 psi Use this size for gas line applications. Also used for long draw beer lines over 25'. Technical Specifications: 5/16" line provides .40 lbs of restriction per foot. Ideally pounds of resistance should equal pounds of applied pressure. 5/16" line holds 1/2 of an ounce per foot. PVC Free.
$10.49 - $143.99
-
Vinyl Beverage Tubing | Rigid | Draft Line | 5/16 in. ID | 9/16 in. OD
Thick wall vinyl (PVC) tubing for gas and beer lines in keg systems. 5/16 in ID is the most common size used in commercial beer dispensing.
$4.89 - $79.99
-
CellarScience® Silicone Bung | Solid | Glass Carboys
Designed to fit 3 to 6.5-gallon glass carboys and 500ml flasks, making it ideal for a variety of storage needs. Ribbed body and ridge prevent slipping or being sucked in, ensuring a reliable seal during long-term storage. Despite its ribbed design, this silicone bung is easy to clean and sanitize for hassle-free use. Solid Silicone bung that will fit a 3, 5, 6 or 6.5 gallon glass carboy or 500ml flask. A solid stopper is the most reliable way to keep oxygen out for long term storage. This bung has a ridge to keep it from getting sucked in when temperatures cool. It also features a ribbed body it doesn't slip out during use. Even though it isn't perfectly smooth like some other stoppers, it remains easy to clean and sanitize. The top measures 1.5" wide and the bottom is 1.13" wide. While the FE592 carboy stopper is a great, economical choice, you may also want to check out our premium, silicone carboy hood FE496 as well. Working as both a solid or a breathable bung (depending on how the plug is set), the FE496 is like getting two bungs in one!
$7.69
-
Stainless Nipple - 1/2 in. BSP
Stainless Steel Straight External Threaded Pipe Nipple 1/2 in. BSP. This is often used to join two female BSP or NPT fittings. As it has a parallel thread (BSPP) it is perfect for attaching stainless ball valves to pots and stuff like that too. If you want to install this onto a pot you just need to drill a hole that is about 20.5mm diameter. KegLand Part Number: KL03667
$4.39
-
Brass - 1/4 in. FPT x 5/16 in. Barb
Brass - 1/4'' FPT x 5/16'' barb
$4.99
-
Vinyl Beverage Tubing | Rigid | Draft Line | 3/8 in. ID | 5/8 in. OD
Use for long draw systems and as an entry line to a draft box. Technical Specifications: 3/8" line provides .20 lbs of restriction per foot. Ideally pounds of resistance should equal pounds of applied pressure. 3/8" line holds 3/4 of an ounce per foot. Made from PVC. Outer diameter of tubing is approximately 5/8"
$2.19 - $76.99
-
Vinyl Beverage Tubing | Rigid | Draft Line | 3/16 in. ID | 7/16 in. OD
Thick wall vinyl (PVC) tubing for gas and beer lines in keg systems. 3/16 in inside diameter (ID) tubing is sometimes used for beer dispensing lines, where the smaller diameter provides more restriction and can reduce foaming.
$4.29 - $51.99
-
Reinforced Vinyl Tubing | 5/8" ID
Our reinforced vinyl tubing is an excellent option for transfering liquids under 158°F that require some pressure resistance. A common application for the reinforced vinyl tubing is the in & out lines to your wort chiller. This tubing is 5/8" inner diameter, is approved to 158°F, and can handle working pressures up to 200 PSI. Reinforced vinyl tubing. FDA & 3-A Sanitary certified for beverage and dairy processing. Inner Diameter (ID): 5/8" (15.9mm) Outer Diameter (OD): 0.89" (22.6mm) Working Pressure: 200 PSI Weight: 0.16 lbs/ft
$9.99 - $399.99
-
Rubber Stopper - #7.5 Solid
#7.5 stopper - solid. Top diameter 1.5 inches (39 mm), bottom diameter 1.22 inches (31 mm), length 1 inch (25 mm). BPA-free stopper made of food grade materials. Injection molded TPE for superior consistency throughout. Perfect for use with carboys, as the material sticks well to glass and PET, even when wet. Max. Temperature Rating: 158 °F (70 °C).
$2.49
-
Stainless Tri-Clamp Ferrule | 2" T.C.
2" TC Ferrule for welding onto a tank or section of pipe. 304-type stainless steel. ID is approximately 1-7/8th.
$10.99
-
Vinyl Transfer Tubing | Flexible | Racking | 1/8 in. ID | 1/2 in. OD
Used primarily in aeration and oxygentation systems that call for 1/8" ID line. 3/16" OD.
$3.69 - $26.29
-
Expansion Stopper
Expansion stopper for sealing beer, wine, and other narrow neck bottles. Simply insert the expansion stopper into the neck of the bottle, press the lever down, and the bottle will hold carbonation and liquids inside. Great for saving a partial bottle of beer or wine while keeping a good seal on the bottle.
$2.49
-
Stainless Ball Valve - 3/4 in. Full Port
Our Ball Valves will last for years. Easy to clean. High grade 304-stainless made to last. 3/4" FPT on input and output side. TIP: You can take a ball valve apart using two crescent wrenches. This will allow you to open up the valve to get to the ball and two gaskets that form the seal when closed.
$24.49
-
Tri-Clamp Thermowell
1.5" Tri-Clamp end cap welded to thin wall stainless tubing for quick accurate temperature readings. Insert 1/4" thermal probe from controller. Works perfectly with our Ranco digital controllers. Thermowell mounts into 1.5" Tri-Clamp ferrule in the side or your tank. Has a 6 inch probe. Works with new 2016 Rancos
$32.99
-
Stopper #12 - Solid
#12 natural latex rubber stopper - solid. Top diameter 64 mm, bottom diameter 54 mm, length 25 mm. 6 stoppers per pound.
$7.99
-
ForgeFit® Stainless Tri-Clamp End Cap | 4"
End caps are used to close off an open tri-clamp port where a valve is not wanted or needed. Can be used to cap off a Kegmenter or the MoreWine!® Cellar Keg. For 4" tri-clamp fittings Made from 304 stainless steel ForgeFit® is a brand of rugged, high-quality fittings made from certified 304 stainless steel. Each fitting is backed by our 60-day no-hassle return policy and a one-year warranty from MoreBeer!.
$26.49
-
ForgeFit® Stainless Butterfly Valve | 2" T.C.
If you want to use the absolute best style of valve available to homebrewers, the butterfly valve is the clear choice. Brewers love butterfly valves because they are far and away the most sanitary option. Regular ball valves can trap small amounts of wort inside them, which inevitably leads to an infection that can sour your beer. That's why we always recommend breaking down your ball valves and cleaning them between uses. Butterfly valve have virtually nowhere for contaminants to hide and are easily cleaned in place. They also can be taken apart for a deeper cleaning if desired, although it's rarely necessary. This 2" Tri-Clamp Butterfly Valve features stainless steel construction and 7-position handle. The handle can be rotated 180° for right or left hand operation. 2" tri-clamp 7 locking positions Squeeze trigger locking handle Made from 304 stainless steel ForgeFit® is a brand of rugged, high-quality fittings made from certified 304 stainless steel. Each fitting is backed by our 60-day no-hassle return policy and a one-year warranty from MoreBeer!.
$99.99
-
Gasket for 1.5 in Butterfly Valve
Replacement interior gasket for H661 Butterfly Valve.
$12.49
-
ForgeFit® Stainless Tri-Clamp | 2.5" Clamp
Tri-clamp fittings are the gold standard in professional breweries and they've been widely adopted in homebrewing as T.C. kettles, fermenters, and pumps become more widely available. Tri-clamp fittings allow you to make a sanitary connection without any nooks or crannies for contaminants to hide in and they can be cleaned in place. Use anywhere you want to make a sanitary connection. 2.5" tri-clamp Made from 304 stainless steel ForgeFit® is a brand of rugged, high-quality fittings made from certified 304 stainless steel. Each fitting is backed by our 60-day no-hassle return policy and a one-year warranty from MoreBeer!.
$11.49
-
Brass - 1/2 in. MPT x 1/4 in. FPT Bushing
Brass - 1/2'' MPT x 1/4" FPT Bushing
$2.99
-
Butterfly Hose Clamp - 2 3/8 in.
Functions the same as a standard Hose Clamp, however rather than needing to find a screwdriver (or dime!) for every adjustment you can easily tighten by hand. As an added bonus, this also has a significantly smoother inside to the clamp, which will not tear up your tubing nearly as much as a standard hose clamp! Ideal for situations where you need to remove tubing from fittings to sanitize.
$2.99
-
Hose Clamp | 1-1/4" to 2-1/8" OD Tubing Clamp | Flathead Adjustment Screw | Stainless Steel
Heavy-duty hose clamp suitable for 1-1/4" to 2-1/8" OD tubing Effective and removable Easily adjusted with a flathead screwdriver Made from stainless steel A heavy duty hose clamp for large OD tubing. As effective as a pre-formed clamp but without the expense or permanence.
$2.99
-
Tri-Clamp Gasket with Stainless Mesh Screen | 16 Mesh | Teflon | 2"
Teflon gasket with 304 stainless mesh screen for 2" tri-clamp connections. Can be used as a filter screen to trap large particulates passing through T.C. fittings. Often used for distillation to retain activated carbon for filtering neutral spirits or used in pot distillation to retain botanicals in the vapor stream. The screen has a mesh size of 16 which will block particles larger than 1.19mm or 1190 microns. This mesh size makes this screen ideal for use in a filer setup with activated carbon. Kegland Part Number: KL30496
$7.19
You have seen 192 out of 276 products