35% off
-
Vacuum & Pressure Relief Valve - 1.5 in. T.C.
This 1.5 in TriClamp pressure and vacuum relief valve is a great way to protect your tank. It will relieve pressure over 1.5 BAR but will also let in air if the tank is a vacuum inside to prevent the tank from imploding. Features: Relief pressure: 1.5 BAR (22 psi) Allows pressure in during a vacuum 1.5 in TC Kegland Part Number: KL01823
$109.99
-
Torpedo Keg Picnic Tap Holder
Tired of fishing your picnic faucet out of the dirt or the bottom of your kegerator? This holder from Torpedo fits over most ball lock keg posts and holds your hand faucet in convenient, clean position. Made from stainless steel with the Torpedo Keg logo etched in. Does not fit pin lock kegs.
$7.99
-
Gas Manifold - 1/4 in. (Aluminum)
Manifolds are a great way to have one CO2 tank supply multiple kegs. This manifold is made from aluminum, brass, and stainless. It also works up to 100 psi and includes 1/4 in ball valves with built in check valves. Another ball valve can be added to the end of the manifold for an additional gas line. Multiple manifolds can be linked up with a 1/4" nipple (D1820B). Features: 1/4" BSP ball valves 1/4" barbs Rated up to 100 psi Screw holes for easy mounting Optional additional port on the end SKU Overall Length D1802 5-1/2 in. D1807 7-3/8 in. D1811 9-5/8 in. D1813 11-1/2 in. D1816 13-1/2 in. The above measurements are from the tip of the brass barb to the plug on the opposite end. Each manifold measures approximately 3.5" from the mounting holes to the tip of the valve. Kegland Part number: KL02554
$26.49 - $54.99
-
Stainless Steel False Bottom Kit - 11.8 in.
This domed false bottom works great with most 10 gallon insulated cooler mash tuns or kettles with a similar diameter. The dome shape design adds strength so it can handle a heavy load of grain. Comes with 13 mm (.51") barb which is perfect for 1/2" ID silicone tubing. Made from 304 stainless steel. 30 cm (11.8") diameter. KegLand Part Number: KL01250
$43.99
-
ForgeFit® Stainless Tri-Clamp Rotating Racking Arm | 2"
Stop leaving clean, perfectly good, wine or beer in your tank and always drain from the perfect height with our tri-clover style rotating racking arms. Remove your existing tri-clamp butterfly valve and place this rotating racking arm between the tank and your valve. When it is time to rack off slightly loosen the clamp nearest the tank and use the built-in handle to rotate to just about the lees level. A white rotatable gasket is placed between the welded in tank fitting and this rotating arm. Because the micro finish of the gasket is hard and slippery it allows the rotating arm to rotate in place. A standard black EPDM gasket is placed between the rotating arm and the butterfly valve and is always kept completely tightened. The length of the arm after the elbow is 14" allowing you to draw from roughly 10" above or below the valve level. The arm measures 13.5" from the TC fitting to the elbow. We suggest you assemble the rotating arm and butterfly valve in such a way that the arm is pointed in the same direction as the handle on your butterfly valve. In this manner you always know how the racking arm is positioned in your tank. 2" tri-clamp Polished finish Made from 304 stainless steel ForgeFit® is a brand of rugged, high-quality fittings made from certified 304 stainless steel. Each fitting is backed by our 60-day no-hassle return policy and a one-year warranty from MoreBeer!.
$234.99
-
BrewBuilt® CoolStix™ Hood for Glass Carboys
Please note: This hood was designed for use with the BrewBuilt CoolStix which has been discontinued. Two of the holes are for an airlock and thermowell, but the third 1/2" hole was intended for the CoolStix and you will need to plug it or utilize it how you see fit. This silicone 3-hole carboy hood is used alongside the BrewBuilt CoolStix. The holes are for a 1/2" CoolStix, an airlock and a carboy thermowell. The holes measure 0.500", 0.413", & 0.375" Compatible with smooth neck carboys only. Does not fit Italian threaded neck carboys.
$8.99
-
KOMOS® Keg Filler FOB
The KOMOS Keg Filler FOB is designed by our in-house engineers to stop the flow of beer once a keg is full. With a sleak design, it is easy to clean and extremely versatile if you wish to reconfigure it for another task. The KOMOS Keg FIller FOB is intended as an upgrade to our Four Station Manual Keg Filler and Single Station Manual Keg Filler. Features: Borosilicate Sight Glass Beer Thread (5/8" BSP) Easy to clean Silicone Washers Stainless Construction Food Grade Check Ball NOTE: Four Station Manual Keg Filler requires four Keg Filler FOBs
$142.99
-
Universal Poppet | Corny Keg Part
A great way to repair your keg, even if you're not sure what type you have! This poppet works on all of the kegs that we sell, Pin or Ball lock! Poppets are pretty easy to damage or lose while cleaning your keg, and having a couple extra universal poppets on hand is a great way to make sure that you can always serve your homebrew! Compatible with our ball and pin lock replacement body connects - KEG460G, KEG470G, KEG1100, KEG1101.
$4.39
-
Neoprene Jacket for BrewBuilt® X2 Uni Conical
Upgrade your base X2 Uni conical with a neoprene jacket to help insulate your fermentation and maintain stable temperatures. Not compatible with the X2 Jacketed Uni conical or X1 Uni conicals.
$59.99 - $85.99
-
Stainless Tri-Clamp Reducer | 3" T.C. x 1.5" T.C.
Stainless steel Tri-Clamp reducer with 3" T.C. and 1.5" T.C. connections.
$32.99
-
Carbonation and Line Cleaning Ball Lock Quick Disconnect (QD) Cap - Stainless - Duotight Compatible
This stainless steel ball lock cap features soda bottle threads, allowing you to convert a 1 or 2 liter soda bottle into a convenient travel growler. The ball lock is compatible with both gas and beverage disconnects, so you can charge the PET bottle before you leave the house and dispense on the go. Use the Duotight compatible stem to connect a 8mm or 9.5mm reducer, then attach EVABarrier draft line to serve as your dip tube and you're all set! These caps also work great for quickly and conveniently cleaning your draft lines. Mix up a small batch of line cleaning solution in a soda bottle, attach the ball lock cap, and then connect it to your beverage line. Place a bucket below your tap to catch the cleaning solution and open your faucet. Then simply turn the bottle upside down and squeeze it to push solution through your line and out the faucet. You can also choose to pressurize the bottle first, but squeezing the solution through is just as effective. Fermenting with the FermZilla? This is ball lock fitting is also compatible with the FermZilla Collection Container. If you use the collection container to add dry hops, attach one of these caps and you'll be able purge the container of oxygen before opening the dump valve to introduce the hops. Attach some tubing and diffusion stone and you can oxygenate your wort through the collection container as well! Features: 6.5mm Duotight Compatible Liquid and Gas Ball Lock Compatible Disassembles for Easy Cleaning Made from Stainless Steel 28mm PCO 1881 Threads Please note: The threaded section of the bottleneck must be at least 1/2" long to form a seal. These caps are not compatible with the KegLand 500mL PET Bottles. Kegland Part Number: KL20435
$15.49
-
KOMOS® Draft Line Cleaning Coupler
This male to male coupler is commonly used in draft line cleaning. It allows the connection of draft lines for cleaning loops. Male beer thread to male beer thread (5/8" BSP).
$19.99
-
Stainless Ball Valve - 1/2 in. BSP Full Port
304 grade stainless steel ball valve. Full port for maximum flow rate. 1,000 psi rating for water, oil, or gas. 1/2" BSP female threads at inlet and outlet. KegLand Part Number: KL03681
$16.49
-
ForgeFit® Stainless Butterfly Valve | 3" T.C.
If you want to use the absolute best style of valve available to homebrewers, the butterfly valve is the clear choice. Brewers love butterfly valves because they are far and away the most sanitary option. Regular ball valves can trap small amounts of wort inside them, which inevitably leads to an infection that can sour your beer. That's why we always recommend breaking down your ball valves and cleaning them between uses. Butterfly valve have virtually nowhere for contaminants to hide and are easily cleaned in place. They also can be taken apart for a deeper cleaning if desired, although it's rarely necessary. This 3" Tri-Clamp Butterfly Valve features stainless steel construction and 7-position handle. The handle can be rotated 180° for right or left hand operation. 3" tri-clamp 7 locking positions Squeeze trigger locking handle Made from 304 stainless steel ForgeFit® is a brand of rugged, high-quality fittings made from certified 304 stainless steel. Each fitting is backed by our 60-day no-hassle return policy and a one-year warranty from MoreBeer!.
$236.49
-
Mini Pressure Gauge (0-150 psi)
This mini pressure gauge is compatible with the BlowTie 2 spunding valve, Duotight in-line regulator, and KegLand mini regulator. We recommend using the gauge with a range closest to your desired pressure setting. If you'd prefer a digital instant read gauge, check out the Digital Mini Pressure Gauge (for gas applications only). Pressure Range: 0-150 psi (0-10 bar) Body Dimensions: 26mm x 26mm x 15mm Probe Diameter: 8mm WARNING: Do not exceed gauge pressure. Exceeding the pressure range will damage the gauge. Note: These gauges are accurate to 10% of the whole pressure range. (ie the 0-30psi Gauge is accurate to +/- 3psi). KegLand Part number: KL1501
$7.69
-
Duotight Push-In Fitting - 8 mm (5/16 in.) x 3/8 in. BSP
This Duotight fitting with 3/8" male thread can be used to convert any female threaded 3/8" connection to Duotight. Comes with seated O-ring. Compatible with EVABarrier 8 mm OD Tubing (D1717 & D1718). Duotight fittings are high-quality push-in fittings that seal tight and offer superior sealing capacity due to the double O-ring sealing design. High Performance Double O-Ring Design: The secret to Duotight’s superior sealing performance comes from the fact that they use not one, but two high-quality EPDM O-rings. The double O-ring means they have literally twice the sealing surface when compared with other push-in fittings. This makes them more reliable and significantly reduces the chance of leakage. The double O-ring system also means that tubing can be bent at a much tighter radius without causing leaking issues, which can be an issue with other fittings. This combination of factors makes Duotight the most reliable push-in fittings on the market. EPDM offers excellent chemical resistance for a longer life span. When compared with silicone and vinyl, EPDM has much better gas transmission rates, better wear resistance, and is BPA-free. No Clamps Necessary! We recommend cutting your tubing straight, not on an angle, to ensure the line forms a complete seal. To remove the fitting simply push in the collet and the hose can be removed. Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C) Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals. Kegland Part number: KL18067
$3.29
-
CellarScience® Silicone Bung | Solid | Glass Carboys
Designed to fit 3 to 6.5-gallon glass carboys and 500ml flasks, making it ideal for a variety of storage needs. Ribbed body and ridge prevent slipping or being sucked in, ensuring a reliable seal during long-term storage. Despite its ribbed design, this silicone bung is easy to clean and sanitize for hassle-free use. Solid Silicone bung that will fit a 3, 5, 6 or 6.5 gallon glass carboy or 500ml flask. A solid stopper is the most reliable way to keep oxygen out for long term storage. This bung has a ridge to keep it from getting sucked in when temperatures cool. It also features a ribbed body it doesn't slip out during use. Even though it isn't perfectly smooth like some other stoppers, it remains easy to clean and sanitize. The top measures 1.5" wide and the bottom is 1.13" wide. While the FE592 carboy stopper is a great, economical choice, you may also want to check out our premium, silicone carboy hood FE496 as well. Working as both a solid or a breathable bung (depending on how the plug is set), the FE496 is like getting two bungs in one!
$7.69
-
Wood Barrel Spigot #1 (6 in Long)
Replacement spigots for the maintenance of your cherished wooden aging barrel. A wooden barrel spigot is something that will need to be replaced from time to time. This wooden barrel spigot features a wooden spout and a plastic valve insert. Spigots are sold individually, with no packaging. The #1 spigot is approximately 6 5/16" long and 18 mm (23/32") at the small end.
$10.99
-
KOMOS® | Stainless Joiner | 1/2 in. Barb x 1/2 in. Barb
Stainless steel joiner fitting for joining multiple lengths of tubing. Recommended for 3/8" to 1/2" ID tubing. The barbs are slightly oversized at 13 mm (0.51"). Made from 304 stainless steel.
$4.39
-
Replacement PRV | Pull Ring Pressure Relief Valve | Yellow | 17 PSI
Corny keg style pressure relief valve rater to 17 PSI Lower the blow off pressure of kegs, regulators, fermenters, etc. for added operating safety Replacement pressure relief valve rated to blow at 17 psi. This corny keg lid style PRV can be used with a range of products including kegs, FermZilla conicals, KegLand kegmenters, and KOMOS CO2 regulators. If you don't intend to ever exceed 17 PSI with the product you're using, installing the Yellow PRV will help ensure you don't over pressurize. NOTE: This is a safety device designed to release pressure at the approximate rated pressure. This is not intended to be used as a Spunding Valve. KegLand Part Number: KL22569
$7.69
-
Stainless Steel Lees Stirrer (For Drill)
Used to stir up lees in a barrel or to ensure a complete mix of so2 or any other addtives, our stainless steel lees stirrer with 24" solid stainless shaft and fold out stainless paddle will get the job done quickly and efficiently. Connect to drill and use on lowest speed. Included black plastic bung seals barrel while stainless shaft spins freely.
$98.99
-
Stainless Elbow - 1/2 in. Male BSP x 1/2 in. Female BSP
Male to female elbow. 1/2" BSP. Made from 304 grade stainless steel. BSP vs. BSPP BSP (or BSPT) fittings have a tapered thread and require teflon tape to form a seal between the male and female fitting. BSP fittings are generally intended to be used with their counterpart of the same thread type. ONLY 1/2" BSP fittings are compatible with US-standard NPT fittings of the same size. BSPP fittings, on the other hand, have a straight thread, require a gasket seated inside the female fitting to form a seal, and are not compatible with NPT. KegLand Part Number: KL06620
$5.49
-
Stainless Tri-Clamp - 1.5 in. Sight Glass (1 in. ID)
If you're a brewer with an eye for detail, you’ll want to own this sight glass. The glass insert allows you to watch the flow of your beer during transfer. Place this Tri-Clamp Sight Glass in-line when you transfer your wort from kettle to fermenter. It is great for monitoring flow and to see how your in-line oxygenator is flowing. Made from 304-type stainless steel with Tri-Clamp ends. The maximum pressure is 150 PSI, about 10 bar. H664 features 1.5" TC connections and a 1" ID flow path. H664B features 1.5" TC connections and a 1.5" ID flow path H664C features 2" TC connections and a 2" ID flow path
$109.99
-
Balazs Hungarian Oak Dominoes | Medium+ Fire Toast
Oak Dominoes (longer contact time than cubes or chips) Medium Plus toast level Fire Toasted by hand Made from winery quality Hungarian/Slavonian Oak These Balazs Oak dominoes feature Medium Plus level toast. Recommended for use during short term aging for 4-5 months. As a starting point use 1 oz per gallon. Taste after four months and add more if needed. Balazs segments are made from Slavonian oak. Slavonian oak is grown in the area of Croatia that borders Hungary. While the area of Slavonia has changed hands many times, being under Hungarian control in the past, what has always remained constant is the quality of the oak grown in the region. Slavonian oak is beloved in Italy where it is widely used in the traditional and classic Italian wines of the Veneto, Tuscany and Piedmont. It is known for having the utmost respect for the fruit which is why Italian producers extensively use this oak. This makes this oak extremely useful for home winemakers who, because of the small quantities being made, need to pay special attention to not over oaking their wine. Use: Short Aging Form: Dominoes - 2" x 1" x 0.4" Time of Contact: 4-5 months Recommended Quantity: 0.8-1.1 oz/gal Type: Medium Plus Toast
$5.49 - $389.99
-
Stainless Barb - 3/4 in. Male BSPP x 3/4 in.
This Stainless Steel BSPP barb will connect any tubing with a 3/4" ID line to any fitting with a 3/4" Female BSPP connection. The barb is slightly oversized at 20mm (0.78") compared to 3/4" (0.75") which will give you a tighter connection with your tubing. BSP vs. BSPP BSP (or BSPT) fittings have a tapered thread and require teflon tape to form a seal between the male and female fitting. BSP fittings are generally intended to be used with their counterpart of the same thread type. ONLY 1/2" BSP fittings are compatible with US-standard NPT fittings of the same size. BSPP fittings, on the other hand, have a straight thread, require a gasket seated inside the female fitting to form a seal, and are not compatible with NPT. KegLand Part Number: KL06668
$5.49
-
Stainless Tri-Clamp Barb - 2 in. x 2 in. T.C.
Convert 2" tri-clover fitting to 2" long barb for connection of tubing. 304-type stainless steel.
$27.49
-
Torpedo Keg Sleeve
These neoprene keg sleeves are custom tailored to fit the standard line of Torpedo Kegs. We were tired of poorly designed sleeves that dragged in the mud and interfered with fittings. The Torpedo Keg Sleeve is designed to only cover the area that needs insulation, leaving the chimes bare and the fittings easily accessible. These little guys will keep your keg colder longer, and give it a clean look while doing so. The sleeves are 6mm thick and feature stitched piping on the edges for exceptional durability. Make sure you get the correct sleeve for your Torpedo keg as we sell two different diameters. For Slimline Torpedo Keg sleeves see KEG651. The 5-gallon sleeve is also compatible with 1/6 bbl or sixtel commercial sanke kegs. SKU Size Diameter Height KEG650A 1.5 gal 9.125" 6" KEG650B 2.5 gal 9.125" 10" KEG650C 5 gal 9.125" 18"
$19.99 - $24.99
-
Beer Faucet Shank | Tower Shank | Matte Black | Duotight Compatible Barb | Intertap® | NukaTap®
This tower shank with Matte Black finish matches perfectly with the NukaTap Stealth Bomber faucet and features a Duotight compatible tailpiece. The 1/4" barb pairs with the Duotight 6.35 mm x 8 mm reducer (DUO10), allowing you to quickly and easily connect 8 mm OD EVABarrier draft line (D1717 & D1718). The Duotight fitting is sold separately and can be found below under "You Might Also Need". Please note these shanks are not compatible with Perlick brand faucets. KegLand Part Number: KL20084
$16.49
-
Corny Keg Lid O-Ring | EPDM | Corny Keg Part
Round EPDM O-rings for Cornelius keg lids.
$3.29
-
ForgeFit® Stainless Tri-Clamp Concentric Reducer | 3" x 2.5"
Adapt any 3" tri-clamp port or valve to work with an existing 2.5" tri-clamp fitting. The concentric design limits flow resistance as you step down from 3" T.C. to 2.5" T.C. 3" x 2.5" tri-clamp 3" long Made from 304 stainless steel ForgeFit® is a brand of rugged, high-quality fittings made from certified 304 stainless steel. Each fitting is backed by our 60-day no-hassle return policy and a one-year warranty from MoreBeer!.
$49.99
-
Duotight In-Line Regulator | 0-150 PSI | Liquid & Gas Compatible | 8 mm Duotight
Easily set different pressures downstream from a single CO2 regulator. Serve different beverages at different pressures without the need for expensive regulator manifolds! Compatible with both liquid and gas 8 mm Duotight inlet/outlet for use with 8 mm OD EVABarrier tubing or 8 mm Rigid Joiners The Duotight In-Line regulator works with both gas and liquid. Easily adjust the flow with the yellow adjustment knob. 8 mm Duotight fittings at both inlet and outlet make this unit perfect for use with EVABarrier 8 mm OD tubing (D1717 or D1718). Suitable for applications ranging from 0-150 psi. Since this unit does not have a built-in pressure gauge, it can be used in the full pressure range without ever needing to purchase or swap out the gauge. We recommend using an adjustable relief valve/spunding valve on your keg to set the pressure. Stepping Down Pressure The ideal regulation scenario occurs when the inline regulator steps down the output pressure to at least 10 PSI less than the inlet pressure. For example, if the inlet pressure is 30 PSI, the regulator effectively manages a range from 0–20 PSI on the output side ensuring optimal performance and stability. Ideal regulation scenario (10 PSI less than inlet pressure) Example of 30 PSI inlet translating to 0–20 PSI output This regulator is perfect for lowering your mains water pressure for use with the Continuous Soda Carbonator Keg Lid. Specifications: Pressure Range: 0–150 psi Suitable for mains water pressure Liquid and gas compatible Easily disassembles for cleaning 8mm (5/16") Duotight fittings at both ends Wall mountable Made from non-corrosive acetyl, nitrile, and stainless parts KegLand Part number: KL02172
$10.49
-
Kegerator Replacement Line Kit | 1-3 Taps | Includes Stainless Tees, Clamps and Gas Line
Kegerator draft line kit for a triple tap tower. Kit Includes: Beverage line Measures 4mm ID x 8mm OD (5/32" x 5/16") 1 x 5.5' length per tap Gas line Measures 5mm ID x 8mm OD (13/64" x 5/16") 1 x 10' length Barbed tee fittings for splitting gas line Hose clamps
$5.99
-
Monotight Push-In Fitting - 6.35 mm (1/4 in.) x 3/4 in. BSP
Connect EVABarrier tubing to 3/4" male threads with this Monotight adapter. Compatible with EVABarrier 6.35 mm OD Tubing. Monotight brings the same superior quality as Duotight push-in fittings but more appropriately sized for applications including water treatment equipment, water filters, reverse osmosis fittings, and more. In addition, they are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C) Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals. Kegland Part number: KL1388
$3.29
-
ForgeFit® Stainless Tri-Clamp Extension Tube (Spool) | 1.5" T.C. | 24" Long
This tri-clamp extension tube features 1.5" tri-clamp connections at both ends and is made from high-quality stainless steel. Extension tubes (or spools) are an easy way to extend the length of any T.C. fitting or can be used to hard pipe a brew system for easier cleaning. 1.5" tri-clamp 24" long Made from 304 stainless steel ForgeFit® is a brand of rugged, high-quality fittings made from certified 304 stainless steel. Each fitting is backed by our 60-day no-hassle return policy and a one-year warranty from MoreBeer!.
$67.49
-
Neoprene Insulating Keg Parka for Oxebar Mono PET Keg | 8L
Keep your beer colder for longer with the insulating neoprene material Prevent dings and scratches during transport with an internal bump cap Easily carry your keg using the removable shoulder strap The zippered design makes it simple to put on and take off Tailormade for the 8L Oxebar Mono PET Keg Keep your beverage colder for longer with the Oxebar Neoprene Jacket. This parka is more than just a cozy sleeve for your keg; it's designed with a rigid internal "bump cap" to prevent those annoying scratches and scuffs that can happen when your keg is being moved around. Made from durable neoprene, this jacket helps maintain the temperature of your beverage, whether you're taking it to a party or just keeping it chilled in the fridge. The Oxebar Neoprene Jacket protects your keg while helping your beer stay crisp and cold. KegLand Part Number: KL42895
$32.99
-
Torpedo Keg Ball Lock Quick Disconnect (QD) | Gas In | Stainless Steel | 1/4" MPT
Heavy-duty ball lock quick disconnect made from 304 stainless steel for lifetime longevity Etched "In" label to clearly identify the QD for gas use Pairs perfectly with stainless steel Torpedo Kegs and compatible with all ball lock corny kegs 1/4" male pipe thread connection For far too long ball lock disconnect fittings have come in only two options -- barb or flare. Torpedo Keg said nuts to that! Then they put down the jar of Planters, pulled out the drawing board and designed this disconnect with 1/4" MPT threads. Made from all stainless steel, we used this fitting to make our Ball Lock Spunding Valve. We're not sure what else it will be used for, but we know our customers, and we're excited to see what you crafty folks come up with! Features: 304 SS Construction - Built to last a lifetime 1/4" MPT Clearly Labeled Ball Lock Gas In 2" Height
$24.99
-
Duotight Push-In Fitting - 9.5 mm (3/8 in.) x 1/4 in. BSP
This Duotight fitting with 1/4" male thread is a great option for connecting gas line to regulators and manifolds that have 1/4" FPT. Comes with seated O-ring. Compatible with EVABarrier 9.5 mm OD tubing (D1719). Duotight fittings are high-quality push-in fittings that seal tight and offer superior sealing capacity due to the double O-ring sealing design. High Performance Double O-Ring Design: The secret to Duotight’s superior sealing performance comes from the fact that they use not one, but two high-quality EPDM O-rings. The double O-ring means they have literally twice the sealing surface when compared with other push-in fittings. This makes them more reliable and significantly reduces the chance of leakage. The double O-ring system also means that tubing can be bent at a much tighter radius without causing leaking issues, which can be an issue with other fittings. This combination of factors makes Duotight the most reliable push-in fittings on the market. EPDM offers excellent chemical resistance for a longer life span. When compared with silicone and vinyl, EPDM has much better gas transmission rates, better wear resistance, and is BPA-free. No Clamps Necessary! We recommend cutting your tubing straight, not on an angle, to ensure the line forms a complete seal. To remove the fitting simply push in the collet and the hose can be removed. Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C) Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals. Kegland Part number: KL14441
$3.29
-
Wing Nut
Allows for hand tightening. Nickel plated brass. Female Beer Thread (5/8" BSP).
$4.69
-
ForgeFit® Stainless Tri-Clamp Elbow | 90° | 3" T.C.
This elbow fitting features 3" tri-clamp connections at both ends and is made from high-quality stainless steel. Perfect for pairing with the BrewBuilt X3 Conical's 3" bottom port for routing yeast and trub dumps. 3" tri-clamp 90° bend Made from 304 stainless steel ForgeFit® is a brand of rugged, high-quality fittings made from certified 304 stainless steel. Each fitting is backed by our 60-day no-hassle return policy and a one-year warranty from MoreBeer!.
$76.99
-
Gas Manifold - Add-on Assembly (Brass)
Great for customizing and expanding your modular gas line manifold! This Add On Assembly for a gas manifold is easy to add to your existing manifold setup. Gives you the ability to expand your setup without having to buy a new manifold. Includes a shut off check/ball valve, one tee and a connecting nipple.
$15.49
-
REX-100 Switching PID | 220V
This is a 1/6" DIN Relay Output controller with PID. It is compatible with many probe types including our PT100s. 220V supply.
$32.99
-
ForgeFit® Soft Rubber Bumper for Brewery Hose Ends | 1"
ForgeFit's rubber hose bumper is the ideal choice for brewery hose ends. Rather than being made from rigid plastic, the soft silicone is designed to absorb impact and help protect hose end fittings that are being continuously picked up and dropped to the floor. The bumper will also keep the hose ends raised off the floor to keep the fittings sanitized and avoid contamination. The two large handles allow you to pick up a hot hose without grabbing onto it directly. This bumper requires some forceful stretching to get over the 1.5" TC fitting. 1.49" ID to stretch over most 1" brewery hoses.
$24.99
-
REX-100 Switching PID | Long | 220V
This is a 1/6" DIN Relay Output controller with PID. It is compatible with many probe types including our PT100s.
$32.99
You have seen 91 out of 91 products