As always, fantastic products! The customer support is outstanding. The more I deal with MoreBeer!, the more impressed I get.

The manifold seemed to be built well, and I was excited to install it. Unfortunately, I had to return the item. The manifold is design for 1/4" tubing. I have 5/16" gas line tubing. Nevertheless, I felt it only fair that I give the product a 5-star rating because I didn't see anything wrong with it, and I would be using today. I personally would like to see MoreBeer! sell the same manifold for 5/16" tubing. Instead, I was left to Bezos' website to purchase the correct manifold. I would have preferred to support a beer company who actually know beer products. Cheers!

I was using the small brass version of this and found them to break easily. These are substantial and I wish I had started with them.

Just finished my Keezer (3 kegs plus a couple growlers) and regulator will connect to my new 4-way manifold. I'll likely add a pressure gauge on the end to verify what pressure is at the manifold. Each tap has built-in check valve (or so the product description stated) to prevent back-pressure into the manifold.

Barbs are a bit narrow for a solid crimp.Other than that it works great.

Only thing is the barbed nipples seem to be smaller than the normal size for gas lines of 5/16". Still able to clamp down the lines to the Barb's.

Took a chance and glad I did. No leaking issues that I’ve noticed yet. Works great and for the price I would purchase again.

No leaks. Solid manifold

I got this as an add-on to a 4-outlet manifold when I expanded my kegerator. A simple close nipple union and all is fine.

Great product. Tested it at 20psi before use. It did not leak.

Very easy to attach. Top construction.

I have a one tap kegerator and wanted to expand to three. Easiest way way to expand with two picnic taps. Works like a charm no leaks. Very happy.

Manifold was well made. the hose barbs were a bit small for my hose and I had CO2 leaks until I cranked really hard on the the hose clamps. Make sure you use the correctly sized hose clamp tightened with a screw driver. A bigger OD hose barb would have worked better.

Exactly what I needed! Worked like a champ!

Why do they make it so hard to remove the adapters I almost broke see aluminum plate before the adapter broke Free Teflon tape is better than whatever they are using for glue till the threads together.

Manifold was as expected no leaks and works as advertised.

Just what I needed for my two-line Keg King. It should have been included with the Keg King, but was a quick and high quality fix.

I purchased a 4 way manifold at the same time as 4 gas lines to complete my carbonation setup. I was disappointed to find that the outlet barbs are 1/4" and the houses are 5/16". It is nearly impossible to get a gas tight seal with this combo. I used the hose clamp came with the hose set and added aoetiger clamp I addition. It is still minimal as the hose rotates easily and it would follow that there is some leakage.

Absolutely perfect. I connected this to my CO2 tank after verifying there were no leaks on my gas line and regulator. I then bumped the regulator up to 40psi and allowed gas flow to the manifold for 48hrs with the CO2 tank main valve in the off position. No leaks. This manifold (the 4 port) is at a slight bevel to allow for the perfect mounting angle in a keezer. Great product. I would buy it again if it ever got stolen or decided to leave me.

Works great, and it should have been included with the Keg-King Triple Tap Kegerator!

Works great very easy to use

Very well made and affordable. Hooked it right up and not a single leak. Thank you Morebeer!