Replacement Recirculation Arm for 35L BrewZilla
Replacement Recirculation Arm for 35L BrewZilla
SKU: AG475H
$25.49
Important Warnings & Shipping Info
Free Shipping:
Fast & Free Shipping over $79
Shipping Rates Apply: Bulk items like grain, bottles, and malt are excluded from our free shipping promotion due to their weight, and often dropship items. Standard shipping rates apply and are calculated at checkout based on your location and order size.
Drop Ship: This product will ship directly from the supplier. Delivery may take 1-4 weeks depending on the vendor.
Discount Exclusion: This item is not eligible for sitewide price reductions or percentage discounts. Learn more.
Freight Shipping: This item ships freight only.
Pre Order: This item is available for Pre-Order. Full payment is required to reserve stock.
T
I got this to use with my EBIAB system that I built. It feeds a CIP ball that I have mounted in my lid for mash circulation and clean up. I think it would be difficult to make your own for less $. I also got the whirlpool arm from them.
S
I use this on my Digiboil tank to recirculate my mash and Sparge. Great piece of equipment for me.
A
I used this one to replace the 1/2 NPT connected arm that came with the Mash & Brew w/ Pump I picked up, just because I didn't get a quality seal on the originally provided arm. The use of the camlock made a big difference. I am now using cam locks exclusively in my brewing setup.
R
Great product and quality, easy to use and well worth it.
T
I got this to use with my EBIAB system that I built. It feeds a CIP ball that I have mounted in my lid for mash circulation and clean up. I think it would be difficult to make your own for less $. I also got the whirlpool arm from them.
A
I have a brewzilla 3.1.1 and want to replace the high temp silicone hose that hangs down into the mash tune frome this arm. What size tubing do I need? thanks.
A
Does this come with an attachment accessory to attach this to the side of my Digiboil? My Digiboil did not come with the pump. I have an external pump I can use.
Does not come with anything not pictured. You would likely be able to attach a "C" clamp beam / conduit clamp to the side of the kettle and the arm to the camp with a conduit hanger from some local hardware store. Likely just a few dollars.
No it does not it is designed to fit the model with the pump. it would simple lock into the preinstalled pipe. in your case simple use clamp and hose.
It only comes with a male 1/2" camlock fitting welded to it. I'm using it on a system I built and just use a short piece of hose with camlock fittings on both ends to attach it to the pump. I have a barbed fitting in my lid that a short piece of hose slides over and I insert the arm into.
A
Has anyone used this to upgrade the Brewers Edge Mash & Boil system with pump?
Yes. It’s a great. Perfect to whirlpool with.
I worked well on my Grainfather.
A
Does this replacement arm come with both male and female camlock connections? Can I use it to upgrade my V2 Robobrew?
It only comes with the male fitting welded on. The picture shows the female on it too I don't have a robobrew so I don't know if it will work on yours.
Yes it does all you need is a 3/8" male connector to it.
Yes it comes with everything you need to convert the v2 Robobrew.
Yes this has everything you need to replace your existing arm. In the picture you can see two little rings on either side. Lifting on those rings will disengage the cam lock and the stem (long part with two bends and rubber grip) will come loose. Then when you want you just push it back into the female part and ensure those two little arms attached the the rings are down and it's locked again.
Hi...It comes with only one Male camlock fitting that connects into the female camlock on the Robobrew V3.0 ..if you want another fitting you will have to add it like I did...using high-temp hard hose to the open end of the Re circulation Arm by heating up the hose and forcing it on followed by clamping it fixed with a step-less ear clamp ( you do not want this to come apart ) and then connect your other camlock fitting also clamping it - this worked great for me ..take care and I hope this helps you... and thank you More beer for letting me help.
Male only
I have to admit I haven’t used mine yet. I believe it does come with both the male and female connections.
Mine came with both!
A
What size connection is on the arm ? I see it’s a male connection . What female connection do I need ?
It is a cam lock O.D is like 3/4 or 1" would have to measure when I get home.
It's a standard size cam lock. One of these should do the trick although it appears they are sold out at the moment. https://www.morebeer.mom/products/stainless-steel-camlock-female-cam-12-fpt-type.html