New Products Check out what's hot & new
SIGN UP FOR SMS Get deals sent straight to your phone
Detecting your location...
Detecting your location...
$25 off $200 — Draft & Kegging Sale On qualifying Draft & Kegging items — ends Monday 11:59pm PST
Shop Now

Duotight Push-In Fitting - 9.5 mm (3/8 in.) x 1/4 in. Flare

    Description

    This Duotight fitting with 1/4" Flare is perfect for flared gas ball lock and pin lock disconnects. Can also be used to connect gas line to the flare fitting found on the KOMOS® CO2 Regulator. Compatible with EVABarrier 9.5 mm OD tubing (D1719). Although this fitting would also fit a beverage disconnect, 9.5 mm OD EVABarrier is only recommended for beverage line in long draw draft set ups.

    The Duotight fitting does not require a flare washer. See the instructions below for how to ensure a leak-free connection when attaching to flare fittings.

    Duotight fittings are high-quality push-in fittings that seal tight and offer superior sealing capacity due to the double O-ring sealing design.
    High Performance Double O-Ring Design:
    The secret to Duotight’s superior sealing performance comes from the fact that they use not one, but two high-quality EPDM O-rings. The double O-ring means they have literally twice the sealing surface when compared with other push-in fittings. This makes them more reliable and significantly reduces the chance of leakage.
    The double O-ring system also means that tubing can be bent at a much tighter radius without causing leaking issues, which can be an issue with other fittings. This combination of factors makes Duotight the most reliable push-in fittings on the market.
    EPDM offers excellent chemical resistance for a longer life span. When compared with silicone and vinyl, EPDM has much better gas transmission rates, better wear resistance, and is BPA-free.
    No Clamps Necessary!
    We recommend cutting your tubing straight, not on an angle, to ensure the line forms a complete seal. To remove the fitting simply push in the collet and the hose can be removed.
    Features:
    • Insert tubing and firmly push to connect
    • Easily release tubing by pushing in the collet
    • Suitable for both gas & beverage applications
    • Made from food-grade acetal plastic
    • Double O-rings made from highly chemical resistant EPDM
    • Locking teeth made from stainless steel
    • Pressure rated to 150 psi
    • Temperature rated to 212°F (100°C)

    Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals.

    Kegland Part number: KL11037

    Duotight Push-In Fitting - 9.5 mm (3/8 in.) x 1/4 in. Flare

      Product form

      SKU: DUO120

      $3.89

      Calculating shipping time...
      Shipping
      Free Shipping*
      Shipping
      Paid Shipping
      Drop Ship
      Drop Ship
      Discount Exclusion
      Discount Exclusion
      Freight
      Freight Only
      Pre-book
      Pre Order

        Description

        This Duotight fitting with 1/4" Flare is perfect for flared gas ball lock and pin lock disconnects. Can also be used to connect gas line to the flare fitting found on the KOMOS® CO2 Regulator. Compatible with EVABarrier 9.5 mm OD tubing (D1719). Although this fitting would also fit a beverage disconnect, 9.5 mm OD EVABarrier is only recommended for beverage line in long draw draft set ups.

        The Duotight fitting does not require a flare washer. See the instructions below for how to ensure a leak-free connection when attaching to flare fittings.

        Duotight fittings are high-quality push-in fittings that seal tight and offer superior sealing capacity due to the double O-ring sealing design.
        High Performance Double O-Ring Design:
        The secret to Duotight’s superior sealing performance comes from the fact that they use not one, but two high-quality EPDM O-rings. The double O-ring means they have literally twice the sealing surface when compared with other push-in fittings. This makes them more reliable and significantly reduces the chance of leakage.
        The double O-ring system also means that tubing can be bent at a much tighter radius without causing leaking issues, which can be an issue with other fittings. This combination of factors makes Duotight the most reliable push-in fittings on the market.
        EPDM offers excellent chemical resistance for a longer life span. When compared with silicone and vinyl, EPDM has much better gas transmission rates, better wear resistance, and is BPA-free.
        No Clamps Necessary!
        We recommend cutting your tubing straight, not on an angle, to ensure the line forms a complete seal. To remove the fitting simply push in the collet and the hose can be removed.
        Features:
        • Insert tubing and firmly push to connect
        • Easily release tubing by pushing in the collet
        • Suitable for both gas & beverage applications
        • Made from food-grade acetal plastic
        • Double O-rings made from highly chemical resistant EPDM
        • Locking teeth made from stainless steel
        • Pressure rated to 150 psi
        • Temperature rated to 212°F (100°C)

        Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals.

        Kegland Part number: KL11037

        Documents
        duotight Female Flare Fittings
        Important Warnings & Shipping Info +
        Shipping Icon
        Free Shipping: Fast & Free Shipping over $79
        Shipping Icon
        Shipping Rates Apply: Bulk items like grain, bottles, and malt are excluded from our free shipping promotion due to their weight, and often dropship items. Standard shipping rates apply and are calculated at checkout based on your location and order size.
        Drop Ship Icon
        Drop Ship: This product will ship directly from the supplier. Delivery may take 1-4 weeks depending on the vendor.
        Discount Exclusion Icon
        Discount Exclusion: This item is not eligible for sitewide price reductions or percentage discounts. Learn more.
        Freight Icon
        Freight Shipping: This item ships freight only.
        Pre-book Icon
        Pre Order: This item is available for Pre-Order. Full payment is required to reserve stock.
        Shipping Weight: 0.1 lb
        • 5 stars: 3 (75%)
        • 4 stars: 1 (25%)
        • 3 stars: 0 (0%)
        • 2 stars: 0 (0%)
        • 1 star: 0 (0%)
        T
        Tom l.
        Great for both gas and beer

        I use these on all gas and beer lines. Be careful not to over-tighten or they will crack. Quick release makes cleaning very easy.

        R
        Roger M.
        Duotight

        Purchased these to use in rebuild of CO2 delivery system. They are simple, and eliminate barbed connections that have been problematic.

        D
        Daniel S.
        Awesome

        These things are legit. Switched my kegerator over to duotight for gas and liquid connections.

        S
        Scott T.
        Love using these on my draft systems.

        Switched all my gas and beer lines over to using the Duotight fittings. Really important to get a nice clean / square cut on the hoses with no burrs on the hose lines in order to prevent leaking. No more needing a flat head screwdriver to remove hose clamps when changing lines and no more slicing your hands on the hose clamps.

        A
        Anonymous

        Since the instructions say they create a "slight "deformity" when tightening does that mean you can't unscrew and reuse them?

        A
        Anonymous

        maybe a dumb question why is the secondary regulator 8mm but this is 9.5? Don't they directly connect?

        MoreBeer!

        9.5mm is meant for liquid side for almost every application it will suffice to use 8mm for gas side. 9.5mm liquid is good to 1:1 replace standard 3/8” hose… only with the benefits of Evabarrier

        MoreBeer!

        There are 2 different diameters of hose 8 and 9.5 mm

        MoreBeer!

        You would need the reducers if you use the 9.5mm on the gas side of your draft system. I use the 8mm for both gas and beer sides.

        Login

        Forgot your password?

        Don't have an account yet?
        Create account