Self-priming must pump with variable flow control from 0 to 100 gallons per minute
Flexible rubber impeller gently pushes must and wine
Stainless steel pump head with 3" tri-clamp connections
Remote control operation with 30 ft. long cord
Stainless steel control box
Stainless steel rolling cart
Made in Italy by EnoItalia
This unit features a stainless steel control box not pictured in the primary image. Updated images coming soon.
The Euro 60 Flexible Impeller pump is a 3" T.C. self-priming pump with a Stainless Steel head, controlled via a frequency inverter that allows for flow control from 0 - 100 gal / minute. These units can be controlled via the remote control on a 30' cord, or from the control panel mounted on the pump itself. Pumps are reversible, self-priming up to 15', and can be used with wine, juice, or must.
The wheeled pump cart allows for easy movement and maneuverability around the winery or crushpad, and stainless steel construction insures that it'll survive through hectic wine seasons! Completely food grade components have no impact on the quality of the wine, and a low shear value due to the larger TC fittings.
This pump is a true all around winery pump because it can be used with must and wine. If you have a commercial crush pad with a larger destemmer crusher like a Jolly40 or above, and you process small berries, you will want to consider the Gamma 80 as it works better with dry fruit (lots of skin and not as much flesh). However the Euro60 works well with most musts and then can be your work horse to move must and wine in the winery, making it a great value you can use year around.
Although the Euro 60 is self-priming, the pump should never be run dry.
Features:
Stainless steel head with flexible rubber impeller
Gear reduction for increased low speed torque
Stainless steel cart
Remote control
Flow rate from 0 to 100 gpm
Flow is reversible
Max Pressure: 33 PSI (2.3 BAR)
3" Tri-Clover inlet and outlet
4KW/5.3HP motor
Will work with 208v or 230v Single Phase Power
14 amp draw
Recommended temperature range: 40 - 150°F (5 - 65°C)
Made by Enoitalia of Europe
Please note: the unit will arrive with a bare power cord. You will need an electrician to wire the appropriate plug.
Coming soon! The Euro 30 is now available for pre-order. Place your order now and we will automatically ship it to you when it's available. The current estimated availability is late summer 2026.
Self-priming flexible impeller pump for moving wine or juice
Stainless steel pump head with 1.5" tri-clamp connections
On/off switch for easy operation
19.8 gallons per minute flow rate
Stainless bypass for reducing flow rate
Made in Italy by EnoItalia
The Euro 30 is a great versatile winery pump for all around cellar needs. The sanitary connections are 1.5" TC to allow for easy hook up of hoses, filters, fillers, you name it. With the included SS Bypass, you can reduce flow rates up to 25%. SS head means easy maintenance, and a power switch on the body keeps all necessary controls conveniently accessible.
Features:
Flow rate is 19.8 gpm
Max Pressure: 40 PSI (2.8 BAR)
1.5" Tri-Clover inlet and outlet
1.5 HP motor
Self-priming
Recommended temperature range: 40 - 150°F (5 - 65°C)
SS Bypass for reducing flow
SS head w/ flexible impeller
110V
Set of Body Seal and Mechanical Seal needed to completely rebuild the pump head. We recommend changing these out at the same time you change your impeller (PMP200A).
Connect these pumps up to an air compressor and you get a gentle transfer solution at a very reasonable price. Flow rates are variable by regulating the inlet air pressure at the compressor and/or by applying back pressure with a ball valve.
We offer two styles of this pump, with either a polypropylene body or stainless steel body. Both styles feature a food grade Santoprene diaphragm. The Polypropylene pumps are available in 3/8", 1/2" and 1" Female Pipe Thread inlet / outlet; the Stainless Steel pumps are available in 1/2" and 1". Stainless Steel adapters to common barb sizes and to Tri-Clover style fittings are available. 1" models offer a Max Flow Rate of 53gpm and a Max Inlet Pressure of 120psi (8.3bar). Please see the specs below for information on this particular model.
Manufactured by ARO. Smaller and larger sizes are available, please call 1-800-600-0033 or e-mail support@moreflavor.com for more information.
Does not include air compressor or regulator
Construction Of H367E:
Specifications:
Stainless Steel outer Body
Black Polypropylene Center
Stainless Steel Hardware
Stainless Steel Seats
Santoprene Ball & Diaphragm
Maximum Air Inlet Pressure .............. 120 p.s.i.g. (8.3 bar)
Maximum Material Inlet Pressure ....... 10 p.s.i.g. (0.69 bar)
Maximum Outlet Pressure ................ 120 p.s.i.g. (8.3 bar)
Air Consumption @ 40 p.s.i. .............. 1 c.f.m. / gallon (approx.)
Maximum Flow Rate (flooded inlet) .... 52.2 g.p.m. (197.6 L.p.m.)
Displacement / Cycle @100 p.s.i. ......... 0.232 gal (0.88 lit)
Maximum Particle Size .................... 1/8" dia. (3.2 mm)
Maximum Temperature Limits ........... 35 to 150 F (2 to 66 C)
Noise Level @ 70 p.s.i., 60 c.p.m. ...... 80.6 db(A)
Dimensions .................................... 12 11/32" W x 12 7/16" H x 11 3/32" D
Connect these pumps up to an air compressor and you get a gentle transfer solution at a very reasonable price. Flow rates are variable by regulating the inlet air pressure at the compressor and/or by applying back pressure with a ball valve.
We offer two styles of this pump, with either a polypropylene body or stainless steel body. Both models feature a Santoprene diaphragm. The Polypropylene pumps are available in 3/8", 1/2" and 1" Female Pipe Thread inlet / outlet; the Stainless Steel pumps are available in 1/2" and 1". Stainless Steel adapters to common barb sizes and to Tri-Clover style fittings are available. 1" models offer a Max Flow Rate of 53gpm and a Max Inlet Pressure of 120psi (8.3bar). Please see the specs below for information on this particular model.
Manufactured by ARO. Smaller and larger sizes are available, please call 1-800-600-0033 or e-mail support@moreflavor.com for more information.
Does not include air compressor or regulator
Specifications:
Maximum Air Inlet Pressure .............. 100 p.s.i.g. (6.9 bar)
Maximum Material Inlet Pressure ....... 10 p.s.i.g. (0.69 bar)
Maximum Outlet Pressure ................ 100 p.s.i.g. (6.9 bar)
Air Consumption @ 40 p.s.i. .............. 1 c.f.m. / gallon (approx.)
Maximum Flow Rate (flooded inlet) .... 12 g.p.m. (45.4 L.p.m.)
Displacement / Cycle @100 p.s.i. ......... 0.039 gal (0.15 lit)
Maximum Particle Size .................... 3/32" dia. (2.4 mm)
Maximum Temperature Limits ........... 35 to 150 F (2 to 66 C)
Noise Level @ 70 p.s.i., 60 c.p.m. ...... 75 db(A)
Dimensions .................................... 7 11/16" W x 11 21/32" H x 6 23/32" D
Connect these pumps up to an air compressor and you get a gentle transfer solution at a very reasonable price. Flow rates are variable by regulating the inlet air pressure at the compressor and/or by applying back pressure with a ball valve.
We offer two styles of this pump, with either a polypropylene body or stainless steel body. Both models feature a Santoprene diaphragm. The Polypropylene pumps are available in 3/8", 1/2" and 1" Female Pipe Thread inlet / outlet; the Stainless Steel pumps are available in 1/2" and 1". Stainless Steel adapters to common barb sizes and to Tri-Clover style fittings are available. 1" models offer a Max Flow Rate of 53gpm and a Max Inlet Pressure of 120psi (8.3bar). Please see the specs below for information on this particular model.
Manufactured by ARO. Smaller and larger sizes are available, please call 1-800-600-0033 or e-mail support@moreflavor.com for more information.
Does not include air compressor or regulator
Specifications:
Maximum Air Inlet Pressure .............. 100 p.s.i.g. (6.9 bar)
Maximum Material Inlet Pressure ....... 10 p.s.i.g. (0.69 bar)
Maximum Outlet Pressure ................ 100 p.s.i.g. (6.9 bar)
Air Consumption @ 40 p.s.i. .............. 1 c.f.m. / gallon (approx.)
Maximum Flow Rate (flooded inlet) .... 14.4 g.p.m. (54.5 l.p.m.)
Displacement / Cycle @100 p.s.i. ......... 0.039 gallons (0.15 lit.)
Maximum Particle Size .................... 3/32" dia. (2.4 mm)
Maximum Temperature Limits ........... 35 to 150 F (2 to 66 C)
Noise Level @ 70 p.s.i., 60 c.p.m. ...... 75.0 db(A)
Dimensions .................................... 10" W x 10 7/8" H x 6 23/32" D
