Detecting your location...
Detecting your location...
$25 off $200 — Draft & Kegging Sale On qualifying Draft & Kegging items — ends Monday 11:59pm PST
Shop Now

Wine Making Equipment

Wine making equipment comes in many different sizes, meaning you don't have to be a commercial winery to make quality wine at home!  We carry everything you need for the wine making process: Crusher-destemmers for crushing your grapes, basket & bladder presses to press the juice out of the grapes, fermenters, storage tanks, and wine barrels for the aging process, and all the wine testing equipment you could possibly need to make sure your wine's numbers are always right where they should be.

Of course, when you're all done making the wine, you'll need to get it into bottles so that you're able to share it with your friends and family!  Don't worry, we also offer all of the required wine bottling equipment for filling, corking, and even dressing your finished product.

        

Shop by collection
265 products

  • Rubber Roller - WE223, Passive Rubber Roller - WE223, Passive

    Rubber Roller - WE223, Passive

    Passive rubber roller for the Italian motorized (WE223PS) crusher destemmers. In documents tab: Position: 22 Quantity Used: 1 EnoItalia Item #: RL002

    $109.99

  • Destemming Shaft Sealed Bearing for WE220 & WE223 Crushers Destemming Shaft Sealed Bearing for WE220 & WE223 Crushers

    Destemming Shaft Sealed Bearing for WE220 & WE223 Crushers

    Replacement destemming shaft sealed bearing for the Italian manual (WE220, WE220PS) and motorized (WE223PS) crusher destemmers. In documents tab: Position: 11 Quantity Used: 1 EnoItalia Item #: R04

    $14.99

  • Square Plastic Plug for Bottom Rails of WE220&WE223 Crushers Square Plastic Plug for Bottom Rails of WE220&WE223 Crushers

    Square Plastic Plug for Bottom Rails of WE220&WE223 Crushers

    Square plastic plug for bottom rails of the Italian manual (WE220, WE220PS) and motorized (WE223PS) crusher destemmers. In documents tab: Position: 7 Quantity Used: 4 EnoItalia Item #: G20

    $1.99

  • WineStix - Dark Toast French Oak Tank Stave WineStix - Dark Toast French Oak Tank Stave

    WineStix French Oak Tank Stave - Dark Toast

    WineStix are a new form of oak integration for wine, designed to give new barrel flavors with an extraction time similar to cubes. The combination of Short and Long grains result in amazing gradience of flavor similar to barrels, while extracting significantly quicker! These are Dark toast French Oak Tank Staves from the Allier forest, and depending on the wine, will impart flavors of dark coffee, some carmelized sweetness, and a roasty smokey character that will compliment big blockbuster varietals. The French Oak Tank Staves are sized to provide New Barrel flavor to a 60 gallon lot of wine. Doing more than 60 gallons? Simply toss in another stave! Another advantage of the WineStix over traditional staves is that these will not stick together like flat staves would, the cross-hatch pattern will result in consistent extraction throughout the life of these. These can also be cut down if necessary to dose a smaller batch of wine.   4" W x 37" Long

    $61.99

  • Low stock! Blichmann WineEasy Leg Extensions - fits 20 and 30 gal units. N/A for 55 gal Blichmann WineEasy Leg Extensions - fits 20 and 30 gal units. N/A for 55 gal

    Blichmann WineEasy Leg Extensions - fits 20 and 30 gal units. N/A for 55 gal

    These are Leg Extensions for use with the 20 and 30 gallon Blichmann WineEasy Fermentors. These will allow you to gravity drain your Fermentor into carboys or other vessels. These legs are not for use with the 55 gallon unit, as it is too large to be safely supported by the legs. Please Note: The Vacuum Pump Kit, which you will need for pressing, will allow you to transfer out of the WineEasy regardless of height via the vacuum created.

    $119.99

  • Wine Filtering Package - Rebuilt Kegs

    Filtering Wine Package - Rebuilt Kegs

    The best way to filter wine at home! Push wine from one keg through a plate filter and into another keg. No pumping, no oxidation, and total control over flow rates. The system can be expanded as needed by adding kegs or additional filter housings. All materials that come in contact with the wine are either stainless steel or food-grade, FDA-approved plastic or rubber. Kegs can be used for wine storage, and the gas system can be used anywhere a blanket of inert gas is needed. Complete filtering system includes one Nitrogen tank, dual gauge Nitrogen regulator, gas line assembly, two 5.5 gallon kegs and our FIL45B Wine & Beer Plate Filtering Kit. The kit includes a set of FIL46 Rough Filter Sheets. Additional sheets and sheets in other micron ratings can be selected from the You Might Also Need section below. Please Note:The Nitrogen tank is shipped empty and will need to be filled at your local welding supply shop. This kit will come with refurbished or converted Ball Lock Kegs

    $379.99

  • Replacement Bottom Valve Assembly for 40L Speidel Bladder Presses

    Replacement Bottom Valve Assembly for 40L Speidel Bladder Presses

    Replaces entire bottom valve assembly on the 40L Speidel bladder presses. Includes connection for hose inlet, drain valve and safety blow-off valve on a brass tree.

    $129.99

  • Speidel Bladder Press - 20 Liters (All Stainless) Speidel Bladder Press - 20 Liters (All Stainless)

    Speidel Fruit Press | Wine Press | German Made | Stainless Steel | 20L

    Expertly crafted stainless steel fruit press made by the original manufacturer of the bladder press Features a slotted screen which mirrors commercial press designs Higher juice yield (65-70%) compared to other press models Can be used with any domestic water supply that provides at least 36 psi of pressure Easy to clean after use—simply spray down with a hose and towel dry Made in Germany by Speidel Speidel was the original manufacturer of the bladder press. While similar to the Italian models in operation, Speidel offers a few quality upgrades. To obtain a better press Speidel uses a slotted screen, similar to what is offered on large commercial presses, instead of a screen with circular perforations. Speidel presses also offer superior hardware and a recessed valve assembly (to reduce accidental breakage). Compared to other presses, the Speidel hydro press has a higher juice yield (~65-70%) and works completely without electricity and with minimal effort. This press can be used with any domestic water supply the provides at least 2.5 bar (36 psi) of pressure. Pressing pressure and pressing time is simply regulated by the water flow. These units are extremely easy to care for and can be cleaned quickly by simply spraying it down with a hose after use. You will find the quality you'd expect from a product that is 100% German-made. Speidel has been shifting their bladder presses from painted to all stainless, and we're pretty excited about it. Although the orange painted versions have their own aesthetic appeal, nothing beats the performance and practicality of stainless steel. Stainless is much easier to clean and much more resistant to rust. The painted versions are likely to chip over time through normal wear and tear, creating small crevasses for bacteria to call home. No such worries when working this beautiful, brushed stainless press. Overall height is 33" and outlet height is 12". A press cycle for this unit averages around 35 minutes. Includes: Complete press assembly Inner mesh bag (to keep fruit from getting in the stainless basket and make cleanup easier) Plastic "spray-protection bag" to keep juice from squirting out Fittings to connect garden hose Instruction manual Presses ship in a corrugated box. Minor assembly (attaching legs) is required before use 1 Year Warranty on all parts! FAQ: Can the press be operated with air pressure? No. These are hydraulic presses that may only be operated with water. When operating with compressed air, there is a risk of explosion and a very high risk of injury if the membrane bursts due to excess pressure or damage. Is a minimum water pressure required? In order to ensure the function and the best possible yield, there should be a minimum water pressure of 2-2.5 bar on the press. What if the water supply delivers more than 3 bar? In principle, this is not a problem, as if the water pressure inside the press exceeds 3 bar, the pressure relief valve opens and there is no pressure-related damage. How many apples make how much juice? On average, 50kg (110 lbs) of apples produce around 30-35L (8-9 gal) of juice, depending on the variety and quality of the apples.  

    $1,399.99

  • Blichmann WineEasy Fermentor - 20gal Blichmann WineEasy Fermentor - 20gal

    Blichmann WineEasy Fermentor - 20gal

    1 review

    Using the WineEasy™ combined fermentor and press is admittedly different than anything on the market, but is incredibly easy to use and provides results and ease of use that traditional fermenting and pressing techniques simply can't offer. At the heart of the system is a high quality stainless primary fermentor (20, 30 and 55 gal sizes). A uniquely designed false bottom located at the bottom of the fermentor allows the pomace to be separated from the wine while draining the unit. The tines on the pressure plate support the bottom of the fermentor and perforated false bottom and keep it from collapsing from the pressure imparted by the vacuum pump. After alcoholic fermentation, the free run is drained or pumped out of the fermentor. The sliding piston assembly is then installed. The vacuum pump evacuates the carboy (or other vacuum capable vessel) and applies a vacuum under the false bottom of the WineEasy fermentor. This causes atmospheric pressure to push down on the sliding piston pressing the pomace to the ideal maximum pressure of 14 PSI to avoid hard press conditions. Since this is all done without transferring the pomace to a press, and is done so in a completely closed and air tight system, oxidation and contamination are virtually eliminated. Cleanup is as easy as scooping out the dry pomace into a container and washing out the high polish stainless steel fermentor! Features: No messy transfers to a secondary fermentor Less risk of contamination and oxidation Great press efficiency Fast Easy to use Simple mess-free cleanup Produce consistently superb wines Please Note: This 20 gallon Wine Easy requires at least 6.6 gallons of must to press effectively.

    $733.49

  • EnoItalia - Delta 1 Destoner Pulper - Alternate Baskets - PLACEHOLDER EnoItalia - Delta 1 Destoner Pulper - Alternate Baskets - PLACEHOLDER

    Alternate Baskets for the EnoItalia Delta 1 Destoner

    The Delta 1 comes standard with 6 mm diameter holes, which is perfect for most plums, apricots and peaches. Alternate baskets with various hole sizes are also available, allowing the destoner to be used with a wide range of produce. Reference the chart below for the recommended hole size to suit your needs. Some fruit have multiple recommendations dependent on how large or small the fruit is. Diameter Recommended Use 0.6 mm Berries, apples, pomegranates, strawberries 0.8 mm Berries, apples, pomegranates, strawberries 1.2 mm Tomatoes 1.5 mm Tomatoes 2 mm Olives 3 mm Cherries 6 mm Plums, apricots, small peaches 8 mm Peaches    

    $769.99 - $919.99

  • EnoItalia - Crusher Destemmer for Elderberries - PLACEHOLDER EnoItalia - Crusher Destemmer for Elderberries - PLACEHOLDER

    EnoItalia Motorized Destemmer for Elderberries | Stainless Steel | 110V

    Motorized unit separates stems from elderberries Stainless steel construction throughout Screw Feed provides fast, continual hands-free operation 2,500 lbs per hour production capacity Made in Italy by EnoItalia Our #1 selling destemmer. This motorized unit with a stainless screw feed also features a stainless steel Body and Bin making it a completely stainless steel model. This model has been adapted specifically for processing elderberries, which have a smaller diameter than grapes. The destemmer can be purchased by itself or alongside the Stainless Stand & Chute. This stainless steel support stand features a closed bottom hopper that keeps your product contained while dropping into a receiving vessel or pump to move your fruit for further processing. Also compatible with the standard EnoItalia Stainless Stand & Chute if you prefer a three-sided, "open" bottom hopper. How These Work: Elderberries are loaded into the top bin where the powered screw feed continually pushes them towards the destemming chamber. The destemming chamber features a removable basket and rotating destemming shaft. Berries fall through the holes into your bucket. Stems get rotated through the basket by the destemming shaft until they exit at the end of the machine where they fall onto the ground or an awaiting bucket. Output Production Powered by a 1hp motor that provides an hourly production of approximately of up to 2500 lbs. Note that these machines must be fed with consistency to reach maximum throughput. Overload the machine with too many elderberries at one time and the motor will pause and actually slow down production. Cleaning Remove two quick bolts and the safety cover slides off and the internal stainless destemming grate slides out for easy cleaning. The hose out the rest of the unit. Comes with directions. Features: 304-Type Stainless Steel Bin, Body, Screw Feed, and basket A Screw Feed in the Receiving Bin for continual, faster, hands-free operation Solid Construction A powerful 110V 1HP motor which provides an hourly production of approximately 2500 lbs. Replacement parts are available Big, Red Emergency stop button on motor shuts down the machine in a hurry to help reduce chance of accident Overall dimensions: 47.6" long x 23.6" wide x 27.1" high. Weight: 110 pounds (50KG.) Figure 150 lbs for shipping weight with pallet.

    $1,549.99 - $1,929.99

  • EnoItalia Crusher Destemmer - Motorized- S/S Hopper & Auger - PLACEHOLDER EnoItalia Crusher Destemmer - Motorized- S/S Hopper & Auger - PLACEHOLDER

    EnoItalia Motorized Crusher Destemmer | Stainless Steel Hopper | Adjustable Rubber Rollers | 110V

    Motorized unit crushes grapes and separates stems in one pass All parts that come into contact with the grapes are made from stainless steel Screw Feed provides fast, continual hands-free operation Self-adjusting rubber rollers are soft on grape stems to reduce tannin extraction 3,000 lbs per hour production capacity Made in Italy by EnoItalia A great value in our motorized Crusher Destemmer line as the parts that are in direct contact with the grapes are stainless while the main body and motor/gear shroud are made from enamel coated steel. Performance is exactly the same as our WE223S Model. The Crusher/Destemmer can be purchased by itself or alongside the Stainless Stand & Chute. How These Work: Grapes are loaded into the top bin where the powered screw feed continually pushes grapes towards the rollers. Grapes are gently crushed by the rubber rollers and then fall into the destemming chamber. The destemming chamber features a removable basket with a bunch of circular holes in it and rotating destemming shaft. Grapes fall through the holes into your bucket. Stems get rotated through the basket by the destemming shaft until they exit at the end of the machine where they fall onto the ground or an awaiting bucket. Rubber Rollers This model features soft rubber rollers which are softer on stems possibly reducing rough tannins in your wine. The rollers are spring loaded and self adjusting to protect against damage, such as the accidental passing of a small stone. Output Production Powered by a 1hp motor that provides an hourly production of approximately of up to 3,000 lbs. Note that these machines must be fed with consistency to reach maximum throughput. Overload the machine with too many grapes at one time and the motor will pause and actually slow down production. Cleaning Remove two quick bolts and the safety cover slides off and the internal stainless destemming grate slides out for easy cleaning. The hose out the rest of the unit. Comes with directions. WE223PS Features: 1) 304-Type Stainless Steel Receiving Bin, Screw Feed, and Destemming Basket 2) A Screw Feed drive receiving bin for continual, faster, hands-free operation 3) Adjustabe Rubber Rollers (adjustment on all small machines, regardless of make, is limited to 5mm because of the way the gears mesh.) 4) Solid Construction 5) A powerful 110V 1HP motor which provides an hourly production of approximately 3000 lbs. 6) Replacement parts are available 7) Big, Red Emergency stop button on motor shuts down the machine in a hurry to help reduce chance of accident Overall dimensions: 47" long x 19.6" wide x 25" high. Weight: 118 pounds (54KG.) Figure 158 lbs for shipping weight with pallet.

    $1,464.99 - $1,859.99

  • Outer Plastic Cover for 300L & 450L Marchisio Stainless Bladder Press - WE170 / WE175 PLACEHOLDER

    Outer Plastic Cover for Marchisio Bladder Press

    Replacement outer plastic cover for Marchisio Stainless Bladder Presses. This cover fits over the closed press during the pressing operation in order to collect any juice spray and direct it down to the trough at the bottom of the press. 300L -- WE170 450L -- WE175

    $84.99 - $252.99

  • Outer Plastic Cover for Speidel Bladder Press - PLACEHOLDER

    Replacement Outer Plastic Cover for Speidel Bladder Press

    Replacement outer plastic cover for Speidel Bladder Press. This cover fits over the closed press during the pressing operation in order to collect any juice spray and direct it down to the trough at the bottom of the press. 20L -- GER101S 40L -- GER102S 90L -- GER104 / GER104S 180L -- GER106

    $64.99 - $134.99

  • Punch Down Tool - (with handles) 72"

    Wine Cap Punch Down Tool w/ Handles | Stainless Steel | 72 in. Long | 12 in. Diameter

    1 review

    Rugged punch down tool at a fantastic price. Exterior 1" diameter 304-type stainless tubing is polished to a mirror finish. Bottom disc is 12" in diameter with four large holes to decrease pressure during punch down. Features Polished Finish 12" disc made from 10 gauge thick stainless Capped/Sealed ends for easy cleaning and sanitizing Constructed from 304-type stainless steel Actual weight is 7lbs. Shipping weight is calculated at 70 lbs because these ship at FedEx oversize 2 rates. 72" Height

    $274.99

  • Marchisio - Stainless Steel Spigot - 1 in BSP Marchisio - Stainless Steel Spigot - 1 in BSP

    Marchisio Stainless Steel Spigot | 1/4 Turn Ball Valve | 1 in. BSP

    Stainless steel spigot with quarter-turn ball valve. 1 in male BSP threads.

    $104.99

  • Low stock! EnoItalia Motorized Apple Shredder

    EnoItalia Motorized Apple & Pear Crusher | Fruit Shredder | Stainless Steel | 1.5 HP | 110V

    Process apples, pears, and other non-pitted fruit Stainless steel construction throughout Easily disassembles for cleaning after use Made in Italy by EnoItalia A motorized shredder for use with apples, pears or any other fruit which needs processing before it can be pressed for its juice. Not for use with peaches, cherries or other pitted fruits. To use, fruit is fed into the hopper at the top of the machine, where it falls on to spinner cutter blades which shred the fruit. The mash is then pushed out of the machine and into your waiting bucket where it can then be transferred to the press. Extremely simple to operate, and safe since the cutting blades are buried deep in the machine during operation. Sturdy, all stainless steel construction means that you know this machine will last you for years and years. Simple disassembly for cleaning. Runs on standard 110V power with a 1.5HP Motor. We tested this shredder ourselves and found that because it is only 110V, you have to feed the fruit in slowly and consistently. If you have access to 220V power, we recommend our WE208 crusher, which can hold more fruit at once and crush more fruit per hour.

    $1,759.99

  • Weldless Wine Cooling Plate Kit  - 14.5 in. x 24 in.

    Wine Cooling Plate | Stainless Steel | Weldless | 24 in. x 14.5 in.

    1 review

    Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory. Cool your fermenting must or wine using this weldless, easy-to-install, 304 stainless steel cooling plate that can be inserted into the lid of any Variable Volume Fermenter. Cold water or glycol is recirculated through the cooling plates thereby reducing the temperature of your ferment. This is a stainless steel setup, ensuring no chance of off-flavor in your wine. You drill two 1-1/16" to 1-1/8" holes into the lid. We provide two gaskets and a lock nut to seal on both sides of your lid, securing the plate in place. Plate measures 14.5" W x 24" H Inlet and Outlet 1/2" Male BSPP thread 300 mm long tubes Bulkheads located approx. 175 mm above the plate 0.48 Square meters of cooling surface Made from 304 stainless steel  

    $339.99

  • Punch Down Tool - (no handles) 72"

    Wine Cap Punch Down Tool | Stainless Steel | 72 in. Long | 12 in. Diameter

    Rugged punch down tool at a fantastic price. Exterior 1" diameter 304-type stainless tubing is polished to a mirror finish. Bottom disc is 12" in diameter with four large holes to decrease pressure during punch down. Features Polished Finish 12" disc made from 10 gauge thick stainless Capped/Sealed end for easy cleaning and sanitizing Constructed from 304-type stainless steel Actual weight is 6lbs. Shipping weight is calculated at 70lbs because these ship as FedEx oversize 2. 72" Height

    $219.99

  • Low stock! Kreyer Centrifugal Humidifier - HumiFix 6 (QUH 6)

    Kreyer Centrifugal Humidifier | HumiFix 6 | 9,900 ft³/h Air Flow | 110V

    Control the humidity of your cellar to prevent wine barrels from drying out Dry, non-humidified barrels will draw liquid to the outer surface where it evaporates, leading to significant product loss Can operate in environments as low as 34°F, making it ideal for cold rooms and storage halls Compact, stand-alone unit can be suspended from or mounted to a wall 9,900 cubic feet per hour air flow Made in Germany by Kreyer Humidity control in wine cellars plays a major role during the production, maturation and storage of wine and other beverages in wooden barrels. Wine barrels safe-guard the main asset of a winery – the wine itself. The wooden walls of dry, non-humidified barrels will draw liquid from inside it up through the small crevices to the outer surface where it evaporates. Over time, this leads to a significant amount of product loss. For example, a 225L wine barrel can lose 10-15% of the wine volume over one year. A professional humidification of the barrel room allows the barrel wood to absorb water-vapor, the crevices fill out and loss of wine is prevented. A well-kept barrel room is therefore cool, usually around 57-60°F and humidified at about 75% - 80% rH. As with every aspect of winemaking, attention and professional equipment are required. Low humidification may allow the wood to dehydrate and wine will evaporate through it, while overly high humidity can lead to mold and fungus. The centrifugal humidifier HumiFix is equipped with a spinning disk that vaporizes water into very fine droplets that can be easily absorbed by the surrounding air, humidifying and cooling a room at the same time. The unit can work either connected to your main water supply with inline cartridge filtration or more ideally to an RO unit. The HumiFix can work at low temperatures (down to 34°F), which is ideal for installation in cold rooms and storage halls. Features: Stand-alone unit Easy installation and handling Compact construction Wall or suspended mounting Specifications: Water Output: 6.5 L/h (1.69 Gal/h) Air Flow: 280 m³/h Power: 230 watts Power Connection: 110V/1Ph/60Hz Dimensions: 24" L x 20" W x 22.25" H Empty Weight: 40 lbs Please note: this unit comes with a bare cord so it can be hard wired to a controller. Otherwise we recommend attaching a 110V male plug and using it with the Inkbird Digital Humidity Controller.

    $3,739.99

  • Vinyl Air Tube - 75 cm Diameter

    Vinyl Air Tube for Marchisio Variable Volume Tanks | 75 cm Diameter

    Replacement air tubes for variable capacity tanks. 75 cm tube fits LA Inox 600 Liter tanks. Please note: These tubes are only compatible with Marchisio brand tanks. They will not work with Speidel or other brands of variable volume tanks.

    $49.99

  • Punch Down Tool - (no handles) 46"

    Wine Cap Punch Down Tool | Stainless Steel | 46 in. Long | 12 in. Diameter

    2 reviews

    Rugged punch down tool at a fantastic price. Exterior 1" diameter 304-type stainless tubing is polished to a mirror finish. Bottom disc is 12" in diameter with four large holes to decrease pressure during punch down. Features Polished Finish 12" disc made from 10 gauge thick stainless Capped/Sealed end for easy cleaning and sanitizing Constructed from 304-type stainless steel Actual weight is 5lbs. Shipping weight is 30lbs as these ship out as a UPS oversize 1 package. 46" Height

    $186.99

  • Vinyl Air Tube - 90 cm Diameter

    Vinyl Air Tube for Marchisio Variable Volume Tanks | 90 cm Diameter

    Replacement air tubes for variable capacity tanks. 90 cm tube fits LA Inox 800-1000 Liter tanks.   Please note: These tubes are only compatible with Marchisio brand tanks. They will not work with Speidel or other brands of variable volume tanks.

    $54.99

  • Cooling Snake - 3.5 Meter Cooling Snake - 3.5 Meter

    Cooling Snake | 3.5 Meters | 0.55 m² Surface Area

    A unique alternative to cooling plates. This tube-within-a-tube snake is used to recirculate glycol or cooled water through your ferment to keep temperatures down. It can dropped directly into a tank, macrobin, or even barrel. The inner vinyl tube runs through the middle of the corrugated stainless tubing, but is shorter than the stainless tubing. Glycol can run through one tube and back through the other, completing the loop. Snakes are outfitted with 1/2in. male NPT threads on both the inlet and outlet.  The inlet is at 90 degrees and the outlet is straight. .55 Square Meters of Cooling Surface Can also be used for heating. Optional silicon sleeve for sealing.

    $309.99

  • Cooling Snake - 5.0 Meter Cooling Snake - 5.0 Meter

    Cooling Snake | 5.0 Meters | 0.75 m² Surface Area

    A unique alternative to cooling plates. This tube-within-a-tube snake is used to recirculate glycol or cooled water through your ferment to keep temperatures down. It can be used in a tank, macrobin, or barrel. The inner vinyl tube runs through the middle of the corrugated stainless tubing, but is shorter than the stainless tubing. Glycol can run through one tube and back through the other, completing the loop. Snakes are outfitted with 1/2in. male NPT threads on both the inlet and outlet.  The inlet is at 90 degrees and the outlet is straight. .75 Square Meters of Cooling Surface Can also be used for heating Optional silicon sleeve available for sealing

    $364.99

  • Vinyl Air Tube - 80 cm Diameter

    Vinyl Air Tube for Marchisio Variable Volume Tanks | 80 cm Diameter

    Replacement air tubes for variable capacity tanks. 80 cm tube fits Marchisio 500-700 Liter tanks.   Please note: These tubes are only compatible with Marchisio brand tanks. They will not work with Speidel or other brands of variable volume tanks.

    $49.99

  • Fruit Collection Bucket with Handle - Oval Fruit Collection Bucket with Handle - Oval

    Italian Grape Collection Bucket with Handle

    Imported grape picking bucket from Italy with a sturdy handle.  Is more maneuverable than a 5 gallon bucket when trying to get in and around grapevines and is also much easier to carry. They do a lot of handpicking in Italy... they have it figured out! *Basket color may vary

    $25.49

  • Non-Return Kit for Chilly 45 Glycol Chiller

    Non-Return Kit for Chilly 45 Glycol Chiller

    If your glycol system is positioned below the level of your jackets, heat exchangers or piping system, you may get back flow into the chiller's reservoir when the solenoid valves at all of your tanks are closed and the chiller's pump turns off. This Non-Return kit works with Kreyer Chilly chillers (25, 35, 45) to prevent this situation. The kit includes a one-way check valve which is installed inline on the chiller's outlet, and an electric solenoid valve installed on the chiller's inlet. The solenoid valve is wired to the relay that controls the chiller's pump such that when the pump turns off the valve closes. Simple to install and completely automatic, this kit allows you to keep the chiller's reservoir full and not worry about the placement in relation to the rest of your glycol system.

    $299.99

  • Destemming Shaft Bracket for WE235, WE236, WE234 (Position 2) Destemming Shaft Bracket for WE235, WE236, WE234 (Position 2)

    Destemming Shaft Bracket for WE235 & WE236

    Destemming shaft bracket for the motorized destemmer WE236.

    $19.99

  • Drive Belt for WE235, WE236, WE234 (Position 41)

    Drive Belt for WE235 & WE236

    Drive belt for the motorized destemmer WE236.

    $19.99

  • Drive Belt for WE223 Crushers

    Drive Belt for WE223 Crushers

    Replacement drive belt for the Italian motorized (WE223PS) crusher destemmers. In documents tab: Position: 5 Quantity Used: EnoItalia Item #: T01

    $9.99

  • Set Screw for Gears and Sprockets on WE220 & WE223 Crushers Set Screw for Gears and Sprockets on WE220 & WE223 Crushers

    Set Screw for Gears and Sprockets on WE220 & WE223 Crushers

    Set screw for gears and sprockets on the Italian manual (WE220, WE220PS) and motorized (WE223PS) crusher destemmers. In documents tab: Position: 28 Quantity Used: 1

    $2.19

  • Rubber Roller - WE223, Driven Rubber Roller - WE223, Driven

    Rubber Roller - WE223, Driven

    Driven rubber roller for the Italian motorized (WE223PS) crusher destemmers.   In documents tab: Position: 23 Quantity Used: 1 EnoItalia Item #: RL013

    $119.99

  • Replacement Flywheel for WE220 Crushers Replacement Flywheel for WE220 Crushers

    Replacement Flywheel for WE220 Crushers

    Replacement Flywheel for the Italian manual (WE220, WE220PS) crusher destemmers. In documents tab: Position: 3 Quantity Used: 1 EnoItalia Item #: A109

    $29.99

  • Low stock! Crank Handle for WE220 Crushers

    Crank Handle for WE220 Crushers

    Replacement crank handle for the Italian manual (WE220, WE220PS) crusher destemmer. In documents tab: Position: 2 Quantity Used: 1 EnoItalia Item #: G10

    $14.49

  • Vinmetrica - SC-50 MLF Refill Kit - 20 Tests

    Vinmetrica - SC-50 MLF Refill Kit - 20 Tests

    This is an all inclusive reagent and reaction vial combo kit with enough supplies for 20 tests. It includes two bottles of 5mL of Boost Juice, two vials of 0.5mL of 1M Malic Acid Solution, two bottles of 30 mL of 0.4 g/L Malic Acid Standard, and two bottles of 30 mL of 0.1 g/L Malic Acid Standard.   Please note: Product should be stored either frozen or refrigerated upon arrival. Please freeze Biopressure Reaction vials, 1M Malic Acid solution, and both Malic Acid Standards upon receipt. Boost Juice should be kept in the refrigerator to maintain its effectiveness.

    $107.00

  • WineStix - Dark Toast American Oak Tank Stave WineStix - Dark Toast American Oak Tank Stave

    WineStix American Oak Tank Stave - Dark Toast

    WineStix are a new form of oak integration for wine, designed to give new barrel flavors with an extraction time similar to cubes. The combination of Short and Long grains result in amazing gradience of flavor similar to barrels, while extracting significantly quicker! These are Dark toast North American Oak staves, and depending on the wine, will impart flavors of toasted oak, dark chocolate, subtle black pepper, and carmelized characters. The American Oak Tank Staves are sized to provide New Barrel flavor to a 60 gallon lot of wine. Doing more than 60 gallons? Simply toss in another stave! Another advantage of the WineStix over traditional staves is that these will not stick together like flat staves would, the cross-hatch pattern will result in consistent extraction throughout the life of these. These can also be cut down if necessary to dose a smaller batch of wine. Stave measures 4 in. W x 37 in. L.

    $49.99

  • 40x40 cm End Plate - Noryl

    40x40 Noryl End Plate

    Replacement End Plate for your 40x40cm Plate & Frame filter.  

    $251.99

  • Replacement Pressure Relief Valve / Blow-Off Valve (Bottom) for Marchisio Bladder Presses - WE170 / WE175

    Blow-Off Valve (Bottom) for Marchisio Bladder Presses

    Blow-Off Valve (Bottom) for Italian Bladder Presses

    $69.99

  • Threaded Aluminum Manifold for Italian Bladder Presses

    Threaded Aluminum Manifold for Italian Bladder Presses

    This is the threaded manifold which is used on the bottom of the press to join the water inlet, pressure relief and pressure gauge assemblies to one another and to the main center shaft of the press. DOES NOT WORK on Speidel presses, which have a different bottom assembly.

    $24.99

  • XpressFill Level Filler (4 Spout)

    XpressFill XF4100 | Level Filler | 4 Spout

    Built-in self-priming diaphragm pump is non-aerating & gentle on your wine Flow stops automatically at the preset fill level Adjustable shelf to accommodate a wide range of bottles Optional gas flush system & variable flow control Made to order in the United States If you're looking for a fast, gentle, reliable, professional quality fill for your wine, then this is the filler for you. Hand-made to order by XpressFill in southern California, these fillers represent the very best available to winemakers. This filler features a built-in self-priming diaphragm pump to draw your wine from your tanks or barrels up to the filler. The action of the diaphragm pump is non-aerative and gentle, and it has the capability of pulling your wine from quite a distance away. The nozzles on XpressFill's Level Filler are independently actuated by microswitches when a bottle is put in place for filling. Flow stops automatically at the preset fill level. This makes it easy to put half the bottles on for filling and take the other half off for corking without having down time in between. The bottle shelf is adjustable in height to accommodate a wide range of bottles. Fills approximately 400 bottles/hr. Add the optional Gas Flush System and the filler will automatically gas-purge your bottles prior to filling. There is no additional button to push or lever to flip, the filler handles it all! Features: Made To Order In USA Built-in self-priming diaphragm pump Diaphragm pump is non-aerating & gentle on your wine Nozzles are independently actuated by micro-switches Flow stops automatically at the preset fill level Bottle shelf is adjustable to accommodate a wide range of bottles Optional Gas Flush System & Filler to automatically gas-purge bottles prior to filling 4 Spout fills approximately 400 bottles per hour  

    $3,795.00

  • XpressFill Level Filler (2 Spout)

    XpressFill XF2100 | Level Filler | 2 Spout

    1 review

    Built-in self-priming diaphragm pump is non-aerating & gentle on your wine Flow stops automatically at the preset fill level Adjustable shelf to accommodate a wide range of bottles Optional gas flush system & variable flow control Made to order in the United States If you're looking for a fast, gentle, reliable, professional quality fill for your wine, then this is the filler for you. Hand-made to order by XpressFill in southern California, these fillers represent the very best available to home winemakers. This filler features a built-in self-priming diaphragm pump to draw your wine from your tanks or barrels up to the filler. The action of the diaphragm pump is non-aerative and gentle, and it has the capability of pulling your wine from quite a distance away. The nozzles on XpressFill's Level Filler are independently actuated by microswitches when a bottle is put in place for filling. Flow stops automatically at the preset fill level. This makes it easy to put half the bottles on for filling and take the other half off for corking without having down time in between. The bottle shelf is adjustable in height to accommodate a wide range of bottles. Fills approximately 200 bottles/hr. Add the optional Gas Flush System and the filler will automatically gas-purge your bottles prior to filling. There is no additional button to push or lever to flip, the filler handles it all! Features: Made to order in USA Built-in self priming diaphragm pump Diaphragm pump is non-aerating & gentle on your wine Nozzles are independently actuated by micro-switches Flow stops automatically at the preset fill level Bottle shelf is adjustable to accommodate a wide range of bottles Optional Gas Flush System & Filler to automatically gas-purge bottles prior to filling 2 Spout fills approximately 200 bottles per hour

    $2,395.00

  • Low stock! ByPass for PMP100 ByPass for PMP100

    ByPass for PMP100

    Can be added to the PMP100 to slow down flow on command. Can reduce flow by up to 25% by taking liquid from the output and redirecting it back to the input. Also good if the pump is encountering back pressure in your particular set up. Has 1.5" TC connection on both the in and the out.

    $164.99

  • 750 mL Antique Green Claret/Bordeaux Wine Bottles, Punted - Case of 12

    Bordeaux Wine Bottles | Antique Green | 750mL | Case of 12

    750 mL wine bottles. Antique green color, claret (Bordeaux) style. Standard cork finish. Punted bottom. Sold in cases of 12 with dividers. Case: 12 Bottles Pallet Layer: 16 Cases Full Pallet: 64 Cases    

    $17.99

  • Macro Bin - Lid

    Macro Bin - Lid

    Plastic cover for 1/2 ton Macro Bin. 48" x 48"

    $114.99

  • Macro Bin - Half Ton Macro Bin - Half Ton

    Macro Bin - Half Ton

    The most popular bin in the wine industry for picking and fermenting. Made from injection molded, high-density food-grade plastic, they are built to withstand forklifting. Holds a half-ton of whole grapes or approximately a ton of crushed fruit. Because they have an internal flat bottom, smooth curved hygienic surfaces, and a great geometry, they are often used as an inexpensive primary fermenter. They work well for this application because they offer good heat dispersal and skin contact. If cooling is necessary consider one of our cooling plates that can be placed horizontally in the bin to give temporary relief from high temperatures. These will hold about 180 gallons of liquid and have a functional capacity of about 135 gallons of fermenting must, allowing for cap development. Cubic capacity: 42,000 cubic inches Tare weight: 96 pounds External dimensions: Length: 47" Width: 47" Height: 28" Internal depth: 22.5" Container design: Double-wall corner and center posts Foot design: Two full-length feet with positive interlocking feature Note: These bins are stored outside so they may be slightly dirty upon arrival.  These are not used units, but will need to be cleaned prior to use due to the storage conditions.

    $399.99

  • MB - Pulse Dampener for Sanitary Pneumatic Diaphragm Pump - 150 GPM

    Pulse Dampener for MB® Sanitary Pneumatic Diaphragm Pump | 150 GPM

    Upgrade your pump with our optional Air-Charged Dampener. Diaphragm pumps naturally create a "pulsing" flow; our dampener smooths this out into a steady stream, which is essential for filtration processes. By removing the surge, you protect your filter media from pressure spikes, ensuring a cleaner finish and longer filter life. This unit is sized for the 3" MB Sanitary Pneumatic Diaphragm Pump. Tri-clamp adapter fittings are included.  

    $2,999.99

  • Low stock! MB - Pulse Dampener for Sanitary Pneumatic Diaphragm Pump - 100 GPM MB - Pulse Dampener for Sanitary Pneumatic Diaphragm Pump - 100 GPM

    Pulse Dampener for MB® Sanitary Pneumatic Diaphragm Pump | 100 GPM

    Upgrade your pump with our optional Air-Charged Dampener. Diaphragm pumps naturally create a "pulsing" flow; our dampener smooths this out into a steady stream, which is essential for filtration processes. By removing the surge, you protect your filter media from pressure spikes, ensuring a cleaner finish and longer filter life. This unit is sized for the 2" MB Sanitary Pneumatic Diaphragm Pump. Tri-clamp adapter fittings are included.  

    $1,669.99


You have seen 192 out of 265 products

Login

Forgot your password?

Don't have an account yet?
Create account