All the stainless brewing fittings you'll need to properly setup & plumb your home brewery! The most common size fittings are 1/2 inch, however we carry a wide variety of sizes and connections so you can customize your brewery how you'd like.
Stainless Nipple - 3/4" x Close
$5.49
$8.79
When you want to customize your own setup, it’s good to have the right fitting on hand. This stainless steel compression fitting gives you the versatility to put your setup together in the way that works best for you. 304-Type Stainless Steel compression fitting. 1/2" Comp. x 1/2" FPT
$28.99
This straight barb in 1/2" (13mm) OD is only compatible with the 1/2" KegLand Quick Connector Swivel Nut. 3/8" (10mm) ID bore. Quick Swivel Nut sold separately. KegLand Part Number: KL31585
$3.99
Half Coupler with 1/2" Female Pipe Thread. Half couplers have thread for insertion from one side only. 304 stainless. Weld into place. You will need to punch a 7/8" hole to install.
$5.49
These are typically used for connecting Ball Valves to couplers welded into tanks. “Close” thread means there is no space between the opposing threads
$3.29
An excellent upgrade to a standard nipple, these have a hex nut in the center to allow easy tightening and loosening in whatever application it's used! 3/4" male BSP threads. BSP vs. BSPP BSP (or BSPT) fittings have a tapered thread and require teflon tape to form a seal between the male and female fitting. BSP fittings are generally intended to be used with their counterpart of the same thread type. ONLY 1/2" BSP fittings are compatible with US-standard NPT fittings of the same size. BSPP fittings, on the other hand, have a straight thread, require a gasket seated inside the female fitting to form a seal, and are not compatible with NPT. KegLand Part Number: KL06460
$4.99
Stainless Reducing Coupler 3/8" FPT x 1/2" FPT
$5.49
This bushing is to use when you want to use your larger pumps with an other fitting.
$6.09
Full Coupler with 1" Female Pipe Thread. Full couplers have threads for insertion from both sides.
$5.49
This straight barb in 5/16" (8mm) OD is only compatible with the 1/2" KegLand Quick Swivel Connector Nut. Compatible with 8 mm Duotight fittings. Quick Swivel Nut sold separately. KegLand Part Number: KL31561
$3.99
Full Coupler with 1" Female British Standard Pipe Parallel Thread. Full couplers have threads for insertion from both sides.
$7.69
An excellent upgrade to a standard nipple, these have a hex nut in the center to allow easy tightening and loosening in whatever application it's used! 3/8" male BSP threads. BSP vs. BSPP BSP (or BSPT) fittings have a tapered thread and require teflon tape to form a seal between the male and female fitting. BSP fittings are generally intended to be used with their counterpart of the same thread type. ONLY 1/2" BSP fittings are compatible with US-standard NPT fittings of the same size. BSPP fittings, on the other hand, have a straight thread, require a gasket seated inside the female fitting to form a seal, and are not compatible with NPT. KegLand Part Number: KL06446
$2.79
304-Type stainless steel compression fitting.
$32.99
Stainless steel coupler or "reducing socket". 1/2" BSPP x 3/4" BSPP. Made from stainless steel. BSP vs. BSPP BSP (or BSPT) fittings have a tapered thread and require teflon tape to form a seal between the male and female fitting. BSP fittings are generally intended to be used with their counterpart of the same thread type. ONLY 1/2" BSP fittings are compatible with US-standard NPT fittings of the same size. BSPP fittings, on the other hand, have a straight thread, require a gasket seated inside the female fitting to form a seal, and are not compatible with NPT. KegLand Part Number: KL10573
$3.89
This straight barb in 3/8" (9.5mm) OD is only compatible with the 1/2" KegLand Quick Swivel Connector Nut. Compatible with 9.5 mm Duotight fittings. Quick Swivel Nut sold separately. KegLand Part Number: KL31578
$3.99
Full Coupler with 3/8" Female BSPP Thread. Full couplers have threads for insertion from both sides. BSP vs. BSPP BSP (or BSPT) fittings have a tapered thread and require teflon tape to form a seal between the male and female fitting. BSP fittings are generally intended to be used with their counterpart of the same thread type. ONLY 1/2" BSP fittings are compatible with US-standard NPT fittings of the same size. BSPP fittings, on the other hand, have a straight thread, require a gasket seated inside the female fitting to form a seal, and are not compatible with NPT. KegLand Part Number: KL06484
$2.79
Stainless 1/4" Coupler
$6.59
Stainless 1/4 in. FNPT Elbow
$5.49
$5.49
Stainless steel barb adapter for 1/4" femaile pipe thread connections. For use with 1/4" or 5/16" ID tubing. Pack of 2.
$7.69
Stainless steel barb adapter for 1/4" female pipe thread connections. For use with 3/16" or 1/4" ID tubing. Pack of 2.
$7.69
Great stainless fitting for connecting two pieces of tubing together with the dimensions of: 3/16 in x 3/8 in
$4.99
Female threaded pipe socket with 1/2" BSP threads.
$5.49
This straight barb in 1/4" (6.35mm) OD is only compatible with the 1/2" KegLand Quick Swivel Connector Nut. Compatible with 6.35 mm Duotight fittings. Quick Swivel Nut sold separately. KegLand Part Number: KL31554
$3.99
Stainless steel coupler or "reducing socket". 1/2" BSPP x 3/8" BSPP. Made from stainless steel. BSP vs. BSPP BSP (or BSPT) fittings have a tapered thread and require teflon tape to form a seal between the male and female fitting. BSP fittings are generally intended to be used with their counterpart of the same thread type. ONLY 1/2" BSP fittings are compatible with US-standard NPT fittings of the same size. BSPP fittings, on the other hand, have a straight thread, require a gasket seated inside the female fitting to form a seal, and are not compatible with NPT. KegLand Part Number: KL10580
$3.89
Stainless - 1/4 in. x 1/8 in. Bushing
$3.29
Stainless steel splicer designed for connecting two different sizes of tubing together. The smaller barb will accept 3/16 in or 1/4 in ID tubing (typical to homebrew systems) on one side, and the larger barb will accept 5/15 in or 3/8 in ID tubing common to commercial systems. Sold individually.
$2.99
Stainless steel coupler or "reducing socket". 1" BSPP x 3/4" BSPP. Made from stainless steel. BSP vs. BSPP BSP (or BSPT) fittings have a tapered thread and require teflon tape to form a seal between the male and female fitting. BSP fittings are generally intended to be used with their counterpart of the same thread type. ONLY 1/2" BSP fittings are compatible with US-standard NPT fittings of the same size. BSPP fittings, on the other hand, have a straight thread, require a gasket seated inside the female fitting to form a seal, and are not compatible with NPT. KegLand Part Number: KL10566
$6.59
Stainless steel coupler or "reducing socket". 3/8" BSPP x 1/4" BSPP. Made from stainless steel. BSP vs. BSPP BSP (or BSPT) fittings have a tapered thread and require teflon tape to form a seal between the male and female fitting. BSP fittings are generally intended to be used with their counterpart of the same thread type. ONLY 1/2" BSP fittings are compatible with US-standard NPT fittings of the same size. BSPP fittings, on the other hand, have a straight thread, require a gasket seated inside the female fitting to form a seal, and are not compatible with NPT. KegLand Part Number: KL10597
$2.79
Stainless Half Coupler with 1" Female Pipe Thread. Half couplers have thread for insertion from one side only.
$5.49
Stainless steel coupler or "reducing socket". 1/2" BSPP x 1/4" BSPP. Made from stainless steel. BSP vs. BSPP BSP (or BSPT) fittings have a tapered thread and require teflon tape to form a seal between the male and female fitting. BSP fittings are generally intended to be used with their counterpart of the same thread type. ONLY 1/2" BSP fittings are compatible with US-standard NPT fittings of the same size. BSPP fittings, on the other hand, have a straight thread, require a gasket seated inside the female fitting to form a seal, and are not compatible with NPT. KegLand Part Number: KL06415
$3.89
This 3-way stainless steel tee is perfect for splitting gas lines to push multiple kegs with one CO2 cylinder. Slightly oversized at 13 mm OD (0.51") for a tighter fit with 1/2" ID tubing.
$6.09
This 3-way stainless steel tee is perfect for splitting gas lines to push multiple kegs with one CO2 cylinder. Slightly oversized at 10 mm OD (0.39") for a tighter fit with 3/8" ID tubing.
$5.49
Half Coupler with 3/8" Female Pipe Thread. Half couplers have thread for insertion from one side only.
$3.99
304-Type stainless steel compression fitting.
$15.99
An excellent upgrade to a standard nipple, these have a hex nut in the center to allow easy tightening and loosening in whatever application it's used! 1/8" male BSP threads. BSP vs. BSPP BSP (or BSPT) fittings have a tapered thread and require teflon tape to form a seal between the male and female fitting. BSP fittings are generally intended to be used with their counterpart of the same thread type. ONLY 1/2" BSP fittings are compatible with US-standard NPT fittings of the same size. BSPP fittings, on the other hand, have a straight thread, require a gasket seated inside the female fitting to form a seal, and are not compatible with NPT. KegLand Part Number: KL06422
$2.79
You have seen 85 out of 85 products
