KegLand is a high quality homebrewing equipment brand based out of Australia. We offer a wide variety of their products, from BrewZilla all-in-one system and DigiBoil eletric kettles, to pumps and grain mills. KegLand beer products are an incredible value, as they combine quality craftsmanship with low prices!
Compatible with the HIZO G14 Pizza Oven or any backyard grill!
Conveniently pre-seasoned—simply wipe with a wet cloth and pat dry
Double-sided with a smooth, flat side and raised grill grooves on the other
Raised lips on both sides to keep in the juices and oils
Perfect for the HIZO G14 Pizza Oven or your backyard grill, the double-sided griddle and flat skillet plate is the heavy-duty heat-retention cooking utensil you need in your arsenal. Weighing in at a whopping 9 lbs, this thick cast iron plate can really hold the heat! The HIZO double-sided skillet has a flat, smooth griddle side, and raised grill grooves for the other side. Both sides have a raised lip to handle some juices and oil to fry in. It can be moved around easily by the two removable handles in three location points on the plate.
Directions for First Use:
Conveniently pre-seasoned—simply wipe with a wet cloth and pat dry
For super sizzling restaurant-style hot plate, preheat on high for at least 20 minutes
Dimensions: 12" x 12" x 1"
KegLand Part Number: KL24907
Connect EVABarrier tubing to 1/4" female threads with this Monotight adapter. Compatible with EVABarrier 6.35 mm OD Tubing. This fitting is also a replacement part for the NukaTap Counter Pressure Filler that allows you to connect Ball Lock Caps (FE13 / FE146) to the body of the filler. Monotight brings the same superior quality as Duotight push-in fittings but more appropriately sized for applications including water treatment equipment, water filters, reverse osmosis fittings, and more. In addition, they are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C) Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals. Kegland Part number: KL08730
This stainless steel drip tray is perfect for the KOMOS Double-Wide kegerator and home bar countertops. At 29.5" in length, this drip tray can comfortably cover up to 8 draft faucets. The grill is removable for easy cleaning.
Features:
Removable grill
Made from stainless steel
29.5" L x 6.7" W x 0.9" D
This BrewZilla PPSU sight glass stainless steel ball valve and elbow use radial seal O-rings to form a strong, leak-free connection. Two in the ball valve and two in the bottom elbow. When assembling the sight glass to upgrade your existing Gen 3 or Gen 4 BrewZilla, you will reuse the female camlock x female 1/2" fitting that comes on the recirculation arm, or you need to purchase a separate fitting for the end of your custom build. You will also need plumbers tape or food grade Loctite to assemble the ball valve with the camlock fitting. Rather than purchasing the parts separately, Gen 3 and Gen 4 BrewZillas can be upgraded with one of these sight glass kits. KegLand Part Number: KL33817
This straight barb in 1/4" (6.35mm) OD is only compatible with the 1/2" KegLand Quick Swivel Connector Nut. Compatible with 6.35 mm Duotight fittings. Quick Swivel Nut sold separately. KegLand Part Number: KL31554
Replacement RAPT Controller for 65L Gen 4 BrewZillas. Compatible with all Gen 4 models. This will not work with BrewZilla Gen 3.1.1 models or older. It is also not suitable for DigiBoil units.
Please refer to the instruction manual on adjusting the controller between the Gen 4 units. There is a mechanical toggle switch on the back of the board that will need to be adjusted.
KegLand Part Number: KL20305
Specifically designed for maximum strength and rigidity. This redesigned top screen features a hole for the probe of the RAPT Bluetooth Thermometer for monitoring and controlling your BrewZilla Gen 4. KegLand Part Number: KL27373
Replacement temperature probe for the RAPT Fermentation Chamber. This is the standard probe that is included with the fridge. It can also be replaced with the Extension Probe which is long enough to be fed into a fermenter's thermowell. KegLand Part Number: KL26451
Dump out the ice slurry from your jockey box without dumping out your draft coils
Designed to pair with KegLand's Square Draft Coils
Use the bracket holes as a guide for where to drill your shank holes
These specially designed shank brackets from KegLand are a great accessory to pair with the Square Draft Coils for your custom jockey box build. The retention brackets will secure the coils in place so they don't come spilling out when you empty the ice slurry from your jockey box after use.
Use the brackets as a guide to mark where to install your draft shanks, then mount them above the square coils and secure in place with the shank hex nuts.
KegLand Part Number: KL40440
Replacement flow control shuttles for the Gen 1 NukaTap FC model faucet (D1584). These pieces are only for the flow control apparatus in the faucet, not the NukaShuttle itself. A backwards compatible replacement shuttle for the Gen 2 NukaTap Flow Control Faucet is coming soon. KegLand Part Number: KL17817
Replacement HIZO Hot Plate Handle. Solid Cast Iron, branded with the HIZO Logo. It features 2 x Holes for variable hook / hanging placement.
The HIZO Cast Iron Double-Sided Skillet includes two handles. This is a single replacement handle.
KegLand Part Number: KL24914
This false bottom is specifically designed for the Gen 4 65L BrewZilla. On this model the ball valve tap was relocated underneath the unit, allowing for a super low profile false bottom that molds itself to the concave bottom of the BrewZilla. This also allowed for a larger malt pipe for bigger grain bills and provides a filter for protecting the easy access pump.
It is not suitable for DigiBoils or Gen 3.1.1 or older BrewZillas, as those models do not have a concave bottom.
Please Note: These are slightly looser in fit for ease of use. These only come with one eyebolt as the spec change means that the additional eyebolt is no longer required.
KegLand Part Number: KL27311
Heat resistant shelves for your brand new RAPT Fermentation Chamber. Can be used for trays of mushrooms or seed sewing with added grow lights. It can also be used as a humidity tray if you require a humid environment for your project. 60 mm (2.3") deep.
KegLand Part Number: KL25553
Rinse and chill your glassware before every pour! Install on the countertop of your wet bar or kitchen sink and hook up to your home water supply Invert and push down your glassware to activate the spray action Excellent kitchen accessory for rinsing wine glasses, compact blenders, tumblers, and More!
A push activated glass rinser can be the perfect final touch to your wet bar for the serious home beertender. Install at the edge of your sink and connect to your household's main water supply. Push down in short bursts to rinse your glass of dust, residual dish soap, and to pre-chill the glass before pouring a pint. These compact glass rinsers are capable of withstanding up to 100 psi of pressure. The 1/2" BSP threaded rod is compatible with a number of Duotight attachments. We recommend installing with PE Water Line and this 1/2" adapter. How to Use: Invert glass and empty last drips into sink Press glass onto the center of the glass rinser in short bursts If you have access to an inline carbonated water source, using bubbly water will really give your glasses a stripping clean. This device can also be used with chilled water to cool your glass down in between beverages. 4.3" H x 4.5" W KegLand Part Number: KL27649
Perfect for mobile draft dispensing with the NukaTap Mini Beer Faucet Clamp onto a cooler to make a jockey box without needing to drill out shank holes Makes for a great temporary shank option for kegerators and keezers when you need an extra tap This bracket is compatible with ice chest coolers and fridges that are up to 3.5" thick. It can be adjusted to have the wing nut clamp in either direction, simply unscrew the flange piece from the threaded rod, then unscrew, then thread from the opposing side. Please note: This item does not include the Mini NukaTap or Shank pieces. It is simply the stainless steel bracket. Recommended Accessories: NukaTap Mini Faucet (D1598) Wall Mount Shank Kit w/ 6.35 mm Duotight (D1598D) Self Closing Spring (D1598A) 6.35 mm OD EVABarrier Tubing (D1723C) KegLand Part Number: KL22002
Keep the top of your kegerator clean with this stainless steel countertop-style drip tray. Perfect for placing underneath a draft tower or 4 faucets mounted side-by-side. Removable grill for easy cleaning. Features 5 pressed locations for drilling through and plumbing the drip tray for draining.
Features:
Removable grill
Made from stainless steel
19.6" L x 6.7" W x 0.6" D
Kegland Part number: KL13178
This Monotight bulkhead works similarly to a pass through shank. Install wherever it may be needed and pass EVABarrier from one side to the other. Compatible with EVABarrier 6.35 mm OD Tubing. Monotight brings the same superior quality as Duotight push-in fittings but more appropriately sized for applications including water treatment equipment, water filters, reverse osmosis fittings, and more. In addition, they are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C) Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals. Kegland Part number: KL21029
Upgrade your MKII Magnetic Drive Pump with a stainless steel pump head that quickly & easily installs via 3" tri-clamp
T.C. connection allows the pump head to be oriented at any angle in a full 360-degrees
Pull ring PRV at the pump outlet makes it easy to purge air and prime the pump before each use
Inline flow path for smooth integration into your brewery while keeping your tubing lines tidy
Stainless steel head with 1.5" T.C. ports to attach your preferred 1.5" tri-clamp fittings
Upgrade your MKII Magnetic Drive Pump with a stainless steel inline pump head! The TC Breakdown Brewing Pump Head provides several advantages over the standard MKII pump head, first and foremost being it's made of stainless steel instead of plastic. This allows for much easier installment of fittings without the risk of breaking off the plastic inlet or outlet. It will also convert the pump head from "Center Inlet" to "Inline" flow path which can make it much easier to integrate into your brewery and keep your brewing hoses tidy. At the outlet of the pump, there is a very handy pull ring PRV that allows you to bleed liquor or wort from the pump head to release trapped air and prime the pump. But what some MKII users might find most exciting about this upgrade kit is that it converts the pump head connection to 3" tri-clamp! Not only do you have a full 360-degrees to orient the pump head any which way, cleaning the pump after use has never been easier—just pop off the tri-clamp, wash out the pump head, and clamp back on.
This upgrade kit is only compatible with the 25-Watt MKII pump (PMP50). It will not fit the larger 65-Watt MKII or the Blichmann Engineering RipTide pump. If you don't already own the 25-Watt MKII, you can purchase it with the T.C. pump head already installed here.
Tri-Clamp Pump Head
The T.C. pump head can be removed quickly and easily using the 3" tri-clamp. This means no drivers or power drills are needed to back out the six Phillips head screws that mount the pump head on the standard version of the MKII. Whip the head off in a flash to clear out spent grain, hop material, or clear a blockage. Attaching the pump head with a tri-clamp also allows the head to be rotated at any angle in a full 360-degrees. This makes it easy to configure the plumbing to your unique brewery setup.
Inline Design
An "inline" pump head simply means the input and output are on a straight horizontal line with one another which can make it easier to integrate into your brewery setup. If you're using a 3-vessel horizontal system, the inline pump head will make it easier to keep your hoses neat and tidy compared to pumps heads with a center inlet.
PRV Purge Valve
The corny keg style PRV will make priming the pump a breeze. Simply let bleed the pump head to purge air out before turning the pump on and you'll avoid any cavitation issues. The PRV also acts as a safety so you do not over pressurize your pump head or brewery system.
304 Stainless Steel
The entire pump head is made from 304 grade stainless steel so it's highly resistant to chemicals, heat, and physical abuse. The 1.5" tri-clamp ports can be used to attach barbs, quick disconnects, camlocks, or any 1.5" tri-clamp fittings you prefer.
KegLand Part Number: KL36924
Please Note: If your upgrade kit came with a 3" Tri-Clamp Beaded White Seal, this is not meant to be used with this kit. Please remove this if you have it installed, it will not seal with it in there.
This Thermal Printer Ribbon is a replacement for the ribbon supplied on the Semi-Automatic Label Applicator Machine. ID: 25mm OD: 63mm Ribbon Width: 30mm Ribbon Length: 100m KegLand Part Number: KL20336
Effortlessly transport your 65L or 100L BrewZilla or 65L DigiBoil with the sturdy rolling flat dolly, designed with precut hole configurations for secure placement Includes two locking wheels to hold your brewing system in place, ideal for cleaning on sloped surfaces or ensuring stability during use Perfect for Lift-N-Lock Pulley systems, enabling seamless movement under pulleys and convenient handling of malt pipes Easily move your BrewZilla or DigiBoil around your brewing area using this rolling flat dolly. The thick reinforced plastic dolly plate comes with two precut hole configurations suitable for 65L & 100L Gen 4 BrewZillas and 65L DigiBoils, allowing the feet of your system to slot into place for easy mobility. Two locking wheels are included so you can lock your brewery in place which can be especially useful if you move the unit to a sloped driveway for cleaning. These dollies are highly recommended if you are using a Lift-N-Lock Pulley type system for your malt pipe. Easily move your system into position under your pulley, and when you're done mashing, pull the malt pipe out, wheel the BrewZilla away, and lower the malt pipe to the ground or into a cleaning tub. This dolly bundle is also the preferred option for 100L BrewZillas and 65L BrewZillas/DigiBoils that use tall bulky distillation heads. Compatible With: 65L BrewZilla Gen 4 100L BrewZilla Gen 4 65L DigiBoil Includes: Reinforced Plastic Dolly Plate 100 mm Castor Wheels (2 locking, 2 non-locking) Mounting Hardware Plate Dimensions: 25.9" Ø x 0.7" Thick (660 mm x 20 mm) BrewZilla sold separately
KegLand Part Number: KB15697 NOTE: Due to the feet placement, the dolly plate is not suitable for the 35L BrewZilla or 35L DigiBoil.
Replacement gasket for Duotight 1/2 in. BSP fittings.
Compatible With:
DUO122 - 9.5 mm (3/8 in.) x 1/2 in. BSP
DUO169 - 8 mm (5/16 in.) x 1/2 in. BSP
DUO162 - 6.35 mm (1/4 in.) x 1/2 in. BSP
KegLand Part Number: KL88830
Replacment malt pipe for the 35L BrewZilla Gen 4. This unit is not suitable for older generation BrewZillas or DigiBoils.
KegLand Part Number: KL32773
Please note: due to patent restrictions in the United States, the malt pipe has been redesigned with one set of bottom feet. This model does not include the "two stage" malt pipe as advertised by KegLand and featured in previous MoreBeer! YouTube videos.
Dough proofing box perfectly sized to accommodate individual pizza dough portions, making it easy to manage and transfer dough. Box only. See here for the box lid or the complete box & lid. Dimensions: 17.5" Long x 12.5" Wide x 3.25" Deep
Replacment malt pipe for the 65L BrewZilla Gen 4. This unit is not suitable for older generation BrewZillas or DigiBoils.
KegLand Part Number: KL32797
Please note: due to patent restrictions in the United States, the malt pipe has been redesigned with one set of bottom feet. This model does not include the "two stage" malt pipe as advertised by KegLand and featured in previous MoreBeer! YouTube videos.
Replacement false bottom for the 35L Gen 4 BrewZilla. Includes eye bolt pull-ring assembly.
Not compatible with older models of BrewZilla or the DigiBoil.
KegLand Part Number: KL27304
Keep your draft system dialed in with this regulator gas board for Duotight In-Line Regulators. The gas board can hold up to six regulators, allowing you to monitor and adjust the pressure going to each keg. In the example photo, the high pressure from the gas cylinder is fed to the regulator on the left, and then stepped down from there with the lowest pressure line in the right-most position. The holes for wall mounting the board and the holes for mounting the regulators are pre-drilled for easy installation. Made from food-grade polypropylene plastic. Regulators, fittings, labels, and mounting hardware are not included. For a fully rigged gas board, we recommend the following parts: 6 x Inline Regulators 12 x Rigid 8mm Joiners 5 x Duotight 8mm Tee Pieces 1 x Duotight 8mm Elbow These items can be found below under You Might Also Need. KegLand Part Number: KL17718
Add the convenience of quick disconnects to your commercial sanke couplers. The K-Lok QD system will allow you to easily connect and disconnect your draft lines from your keg coupler with no spilling or loss of gas. This K-Lok Male x Male Beer Thread (5/8" BSP) is designed to be attached to your gas line and then connected to the K-Lok Female fitting attached to your keg coupler's gas in port. The built-in check valve prevents gas from draining out of your line when it's disconnected so it's a dry break. Draft lines can be connected to the Male Beer Thread end using a Duotight Adapter for EVABarrier tubing or Hex Nut & Tailpiece for other draft tubing. KegLand Part Number: KL04923
Jazz up your kegerator, home bar or commercial beverage dispensary with these stylish decal holders. Clamps directly on to the beer shank coupling nut so you don't have to remove the faucet to put on the decal holder or to swap out the decal itself. Made from chrome plated plastic with a soft padding to protect your draft components from scratches. Easily attach or remove the decal holder with a philips head screw dirver. This unit will fit an 82 mm (3.2") diameter decal, sticker or label. Also avaialbe in 73 mm (2.8") diameter. KegLand Part Number: KL0088
Brass reducing bush. 1/2" BSPP x 3/4" BSPP.
BSP vs. BSPP
BSP (or BSPT) fittings have a tapered thread and require teflon tape to form a seal between the male and female fitting. BSP fittings are generally intended to be used with their counterpart of the same thread type. ONLY 1/2" BSP fittings are compatible with US-standard NPT fittings of the same size. BSPP fittings, on the other hand, have a straight thread, require a gasket seated inside the female fitting to form a seal, and are not compatible with NPT.
KegLand Part Number: KL26338
The fitting is to be used in a KegLand Stainless Steel Quick Swivel Connectors in 1/2" Female NPT. This is the end cap only. Handy for terminating 1/2" Quick Swivel Connections.
KegLand Part Number: KL31646
This is a complete replacement silicone tubing kit for the pump and ball valve tubing on a 100L Gen 4 BrewZilla. Made from food grade silicone and temperature resistant to 356°F (180°C).
KegLand Part Number: KL32278
Replacement o-ring for the ball valve included with the KegLand Bucket Buddy stainless fermenter.
Please note the color of the O-ring recently changed to white/clear. Updated images coming soon.
KegLand Part Number: KL29186
Replacement turn table assembly and handle for the Cannular Pro Semi-Auto Can Seamer (CAN110).
It is not compatible with the manual seamer model (CAN100).
Keep your draft system leak-free with this convenient 10-pack of replacement O-rings, specifically sized to fit 1/4" male threaded duotight fittings. Whether you are refreshing older fittings that have dried out or simply replacing a lost seal after a deep clean, having these on hand ensures a perfect, airtight connection every time.
Direct Replacement For:
DUO129 - Duotight Push-In Bulkhead - 8 mm (5/16 in.) x 1/4 in. BSP
DUO103 - Duotight Push-In Fitting - 8 mm (5/16 in.) x 1/4 in. BSP
DUO173 - Monotight Push-In Fitting - 6.35 mm (1/4") Female x 1/4" BSP
KegLand Part Number: KL28967
It is really THAT easy to make good beer at home?+
YES! If you can follow a recipe and keep clean, there is nothing stopping you from making great beer in your home - beer you can be proud of and your friends will love! The MoreBeer! mission is to provide reliable equipment and quality ingredients that make the home brewing experience successful and satisfying. We'll get you started in home brewing the way we wish we had been started.
