Make quick work of transferring finished beer from fermenter to kegs with the easy-to-operate four station manual keg filler Optional Keg Filling FOBs stop flow automatically once the keg is full, eliminating waste and making it even easier for a single person to operate the filler Sight glass at the inlet allows you to monitor beer flow from the fermenter—check if you're pulling yeast or breaking CO2 out of solution Elevated sample port for purging air from the system before filling runs Made from high-quality Stainless Steel tri-clamp fittings, custom-welded stand, and reinforced silicone tubing Shorten the time it takes to do your least favorite task with the MB Keg Filler. Our Keg Filler was designed by renowned brewmaster Colin Kaminski to make filling kegs a simple process that can be completed quickly. Connect your tank to the keg filler via the 1.5" butterfly valve inlet, which will enable you to shut off flow if you run into any issues. Monitor flow with the sight glass to see if you're pulling yeast, if there's air present in the system, or if CO2 is breaking out of solution because you're filling too quickly. The highest point in the filler is a plunger-style sample valve sitting at the opposite end, allowing you purge air out of the system and minimize oxidation. The high-quality stainless steel keg couplers have had the check valves removed so beer and CO2 can flow backwards when needed. Reinforced silicone tubing on the beer-out side offers more protection when cleaning and sanitizing the system with hot solution. Clear vinyl on the gas-out side operates as a sight glass to let you know what's happening in the keg—foam in the tubing indicates you're filling too quickly, while beer in the tubing indicates the keg is full. The Manual Keg Filler is available with or without a Keg Filler FOB on each filling line. See the instructions below for operating the keg filling FOBs. 4-Head Keg Filling Station Stainless Steel D-style sanke couplers Reinforced silicone tubing on beer side Clear vinyl tubing on gas side Custom-welded compact stainless steel stand
This adapter piece enables legacy Torpedo Mini CO2 Regulators (KEG965A) to be compatible with 74g CO2 cartridges that have a small unthreaded gap at the top of the neck—cartridges similar to KEG969. This piece now comes standard on the updated Torpedo Mini CO2 Regulator and is a direct replacement part for KEG965B.
Replacement lid for the Megamouth series ball lock Torpedo Kegs. Includes o-ring and PRV rated to 85 psi. This is an extra-large corny style keg lid that will only fit Megamouth Torpedo Kegs. For standard corny keg lid, see here.
For taking body connects off your kegs when cleaning and replacing o-rings on kegs with 11/16" body connects.
There are two sizes of body connects. 11/16" and 7/8". When ordering please order the size that corresponds to body connects that you already have.
Complete assembly for conveniently serving beer out of a pin lock style keg. Commonly used to serve on the go because there is no beer lines to get in the way! Comes with QD faucet adapter, stainless faucet with stainless steel shank, faucet knob and Pin lock beverage out quick disconnect.
Connect two pin lock kegs together via their liquid out fittings. Handing for moving sanitizer or beer from one keg to the next. Use this fitting at a big party to connect kegs to pour both kegs.
ForgeFit's rubber hose bumper is the ideal choice for brewery hose ends. Rather than being made from rigid plastic, the soft silicone is designed to absorb impact and help protect hose end fittings that are being continuously picked up and dropped to the floor. The bumper will also keep the hose ends raised off the floor to keep the fittings sanitized and avoid contamination. The two large handles allow you to pick up a hot hose without grabbing onto it directly.
This bumper requires some forceful stretching to get over the 1.5" TC fitting.
1.49" ID to stretch over most 1" brewery hoses.
Premium Counter-Pressure Bottle filler that is designed for the smaller craft brewer or dedicated homebrewer to help make bottling day faster and more efficient
The four separate filling heads have individual Stainless Steel 3-way control valves that allow for quick fill rates
Only requires one person to operate
A single PRV provides equal backpressure on all heads resulting in matching flow rates without adjustment
Individual purge valves on each fill head allow for nearly all oxygen removal in a bottle, ensuring that the beer stays fresh for longer
The removable drip tray is fully draining with a barbed outlet for constant filling and easy cleaning
A purge valve on the reservoir helps make sure that foam never builds up
304 Stainless Steel Construction and easy-to-use functionality, all resulting in a top-of-the-line bottle filler
Introducing the newly redesigned and updated G2 Medusa Multihead Counter Pressure Bottle Filler! This unique unit was designed in-house by the MB Pro Engineering team and purpose built for the smaller craft brewer or dedicated homebrewer. The Medusa will speed up bottling day while also reducing exposure to oxygen during the bottling process, resulting in higher quality beer with a longer shelf life.
The Medusa Multihead Counter Pressure Bottle Filler can be adjusted to cater all bottling needs. All four heads can be operated individually, and the height, back pressure, and fill speeds can be adjusted for various bottle styles. We've done our best to pack this unit with features that will handle all jobs, while keeping costs as low as possible.
Features:
3-way stainless steel valves on both inlet & back pressure sides of all fill heads.
Improved Pressure Relief Valve has higher accuracy over fill rates, and directs foam into the drip tray rather than onto your bottles.
Robust stainless steel frame stands on its own or can be easily bolted or clamped to a work surface
Stainless steel fill reservoir keeps fill rates equal & reduces foaming
Inverted fill tubes & reservoir purge means cleaner filling with even less possibility for foam.
Dual TC Fill reservoir is easier to clean & allows for upgrades down the road (as they become available).
Easily adaptable to fill from nearly any pressurized vessel.
Height is adjustable from shorty bottles to growlers.
Easy disassembly for cleaning, storage & maintenance,
Sanitary 1.5" TC inlet for beer (Clamp and Gasket sold separately)
3/8" tube connection for CO2.
Backpressure Bar allows for a single adjustment point for fill rates. No more adjusting PRVs on each fill head.
Minimum Bottle Height: 6.9"
Maximum Bottle Height: 16.5"
Maximum Working Pressure: 15 PSI
Dimensions:
Footprint: 26-3/8" L x 8" W
Drip Tray: 23-1/2" L x 5-1/2" W
Overall Height: 25-3/8"
Please Note: Filler valves include a Teflon gasket. Do not soak the valves in PBW which can corrode Teflon material after prolonged contact.
A replacement poppet for older, used Firestone brand ball lock kegs. It will fit the Firestone V Challenger, VI Challenger and Super Challenger kegs. Each keg used two poppets.
Will thread into some body connects and form a seal with a dip tube gasket added.
For use when making your own custom equipment. With ball lock QD's. Female thread is at 5/16-24 -5 45° flare (SAE J512).
The Most Essential Barrel Accessory!
Keep your wine safe and ensure the integrity of your barrel with this top-up system. We're all familiar with the fact that barrels lose volume over time - in fact the evaporation that leads to this is one of the benefits of aging wine in a barrel. However, let it go too far with out topping up and the excess headspace in the barrel will cause your SO2 levels to drop and open the door to oxidative or bacterial spoilage. That is why it is essential to keep your barrel topped up at all times!
Our MoreWine! Topping system is based around the common 5 gallon Cornelius ("Corny") Keg. These kegs are relatively inexpensive, simple to work with and easy to get parts for. 5 gallons of topping wine is about the right amount to work with a new 30 gallon barrel. The best part about topping up your barrel from a keg is that the wine that remains in the keg is always protected by a layer of the inert gas that you used to push the previous wine out, so it doesn't matter how long the wine sits in the keg!
This kit includes the Argon/Nitrogen tank and regulator for you to push the wine out of the keg, and all the tubing and other parts that you need to make it work, as well as comprehensive instructions.
Kit Includes:
New High Quality Italian 5 gallon "Corny" keg
20 cu. ft. Argon/Nitrogen tank
Argon/Nitrogen regulator
Tubing and hardware to connect the gas regulator to the keg
Tubing and hardware to dispense wine from the keg into your barrel
Cleaning brush for your dispense line
Comprehensive instructions for assembly and use
If you're serving beer from a hand held faucet and are looking to upgrade your kegerator system this is your kit. All you need is a 1" hole saw to drill a hole and your ready to assemble. Easy!
Comes with:
D1255 - Faucet,Knob, and Shank Combo
D1480 - Economy Drip Tray
D1700 - 5 feet
H950 - Hose Clamp Qty.2
KEG700- Beverage Out Ball Lock
You save 10% buying this complete kit rather than piecing it all together separately. Cheers!
Please Note: Keg Not Included
Clean and sanitize two full size kegs per 5-minute cycle
Fully automated PLC controller executes every step of the cleaning, rinsing, and sanitizing process
Optional hookup for steam cleaning
Preset programs 1/2 bbl, 1/4 bbl and 1/6 bbl sanke kegs
This fully automated keg washer will efficiently wash two kegs simultaneously, enhancing productivity and streamlining your brewing operations. The Keg Washer has two reservoirs, one is heated for caustic and the other holds sanitizer to ensure a thorough and effective cleaning process.
All steps are easily configurable in the computer control unit. Those seeking an extra level of sanitization, this system comes equipped with an option to use steam for an extra level of sanitization.
Features:
Washes two kegs simultaneously (~5 min per cycle for 1/2 bbl kegs)
21-gallon heated Caustic reservoir
21-gallon sanitizer reservoir Size
Optional steam hook up
Uses compressed air to empty kegs
Stainless construction
Water resistant enclosures
Preprogrammed Siemens PLC controller (preset for 1/2 bbl, 1/4 bbl and 1/6 bbl kegs)
Easily reconfigured for custom applications
6kw heating element in the caustic reservoir.
Dimensions: 43.3" L x 29.5" D x 48.3" H
With Kegs Installed: 43.3" L x 40.1" D x 57" H
Keg Loading Height: 35"
Shipping Dimensions: 48" x L 33" W x 56" H
Hook Ups:
208/220V Single Phase electrical
Compressed Air
CO2
Water
