Perfect CO2 regulator for wall mounting in a cold box or outside of your keezer etc!
Wall brackets for easy mounting
5/16” barbed outlet fittings with individual shutoff valve
How do one keg of beer, one keg of sparkling wine, and one keg of root beer, sound for your next party? Awesome? Yeah, we think so too. But, each of these different beverages requires a different serving pressure, and nobody wants to go buy an extra CO2 tank and regulator for each different beverage. Enter the Secondary Regulator!
Standard multi-body CO2 regulators are heavy and can make a CO2 tank prone to tipping over, especially as it gets empty. Combine that with the fact that there aren’t Gauge Cages for multi-body regulators and you’ve got a recipe for disaster.
Secondary regulators do not attach directly to CO2 tanks, instead mounting to the side or wall of a fridge, kegerator or jockey box. They allow you run multiple keg pressures from one tank of gas. CO2 line from your existing system attaches to secondary input, and the output pressure to the keg is easily adjustable.
Features wall brackets for easy mounting. Multiple units can be purchased and ganged together, making it a snap to expand your system at any time. 5/16” barbed outlet fittings with individual shutoff valves.
Keep your draft system dialed in with this regulator gas board for Duotight In-Line Regulators. The gas board can hold up to six regulators, allowing you to monitor and adjust the pressure going to each keg. In the example photo, the high pressure from the gas cylinder is fed to the regulator on the left, and then stepped down from there with the lowest pressure line in the right-most position. The holes for wall mounting the board and the holes for mounting the regulators are pre-drilled for easy installation. Made from food-grade polypropylene plastic. Regulators, fittings, labels, and mounting hardware are not included. For a fully rigged gas board, we recommend the following parts: 4 x Inline Regulators 8 x Rigid 8mm Joiners 3 x Duotight 8mm Tee Pieces 1 x Duotight 8mm Elbow These items can be found below under You Might Also Need. KegLand Part Number: KL17701
Angled 1/4" tailpiece that is used with hex nut (D1740). Fits on couplers and shanks. Requires 1-1/16" clearance above the coupler or behind the shank. Made from stianless steel. ID - 3/16" OD - 1/4" Kegland Part number: KL05081
Great Replacement for a broken gauge.
Replacing a broken gauge on your pressure regulator is a snap with this Right Hand Thread 3000 psi Replacement Pressure Gauge for CO2 or Nitrogen regulator. Installation is simple, and it prevents you from needing to buy a whole new regulator.
Used to determine level of remaining gas in the tank.
1/4” MPT Right-hand thread fits most regulators.
Install a tap where you want it, without the hassle of searching for all the separate components you’ll need. This faucet, knob, and shank combo is a great price, it’s easy to install, and it works and looks great!
This kit includes the 4" shank with 3/16" nipple, all stainless faucet, and plastic 2.5" knob.
Keep the top of your kegerator clean with this stainless steel countertop-style drip tray. Perfect for placing underneath a draft tower or 2 faucets mounted side-by-side. Removable grill for easy cleaning. Features 5 pressed locations for drilling through and plumbing the drip tray for draining.
Features:
Removable grill
Made from stainless steel
11.8" L x 6.7" W x 0.6" D
Kegland Part number: KL13161
The coupling nut is what attaches your beer faucet to the shank. This black coupling nut pairs perfectly with the NukaTap Stealth Bomber faucet without the need to purchase a whole new shank. Or add some flair to your existing setup by mixing and matching black and stainless steel.
Handle this part with care, as scratches will show up more clearly compared to the stainless versions.
KegLand Part Number: KL20275
This beverage line jumper connects to the bev output on a ball lock homebrew keg and to the back of a pass through shank on a jockey box. This is a direct replacement to the beverage jumper that comes with the KOMOS Jockey Box Connection Kits (D1761 & D1763). Specifications: 5 ft of 5/16" ID Beverage Tubing 5/16" Tailpiece Elbow Flared Ball Lock Bev Out
Perfect CO2 regulator for wall mounting in a cold box or outside of your keezer etc!
Wall brackets for easy mounting
5/16” barbed outlet fittings with individual shutoff valve
How do one keg of beer, one keg of sparkling wine, and one keg of root beer, sound for your next party? Awesome? Yeah, we think so too. But, each of these different beverages requires a different serving pressure, and nobody wants to go buy an extra CO2 tank and regulator for each different beverage. Enter the Secondary Regulator!
Standard multi-body CO2 regulators are heavy and can make a CO2 tank prone to tipping over, especially as it gets empty. Combine that with the fact that there aren’t Gauge Cages for multi-body regulators and you’ve got a recipe for disaster.
Secondary regulators do not attach directly to CO2 tanks, instead mounting to the side or wall of a fridge, kegerator or jockey box. They allow you run multiple keg pressures from one tank of gas. CO2 line from your existing system attaches to secondary input, and the output pressure to the keg is easily adjustable.
Features wall brackets for easy mounting. Multiple units can be purchased and ganged together, making it a snap to expand your system at any time. 5/16” barbed outlet fittings with individual shutoff valves.
Serve beer on tap at home! A quality CO2 tank is a core component to any home draft system.
Made from high-quality aluminum that will never rust like steel tanks
Dispense 4 x five-gallon kegs of homebrew
CGA320 valve pairs with standard US-style CO2 gas regulators
KOMOS® offers a full suite of first-rate draft products and draft fittings—from kegs to faucets and everything in between!
Compact 2.5 lb size is perfect for mobile draft dispensing at BBQs and tailgate parties!
Brand new aluminum 2.5 lb CO2 tank made from high strength aluminum alloy and high quality CGA320 valves. Because it is made of aluminum rather than steel you can feel confident that it won’t rust. It’s called a 2.5 lb tank because it holds 2.5 lbs of compressed (liquified) CO2. 2.5 lbs of CO2 is enough to dispense about 4x 5-gallon kegs of homebrew.
Aluminum tanks are superior to steel because they do not rust. All tanks are shipped empty. To have tanks filled you will want to visit your local welding supply shop. Because you are purchasing a new tank you can choose to either have it filled or to exchange it for a filled tank at your local gas supplier. If you have this tank filled the local gas supplier is responsible for affixing the correct neck label that identifies the gas being put in the cylinder.
Tanks should always be stored in an upright position.
Features:
Made from corrosion resistant, engineered Aluminum
Brushed finish
Thick, durable cylinder walls
14.75" T x 4.375 Ø
DOT approved
New high quality CGA-320 valve
Light weight compared to steel tanks
Keep your draft faucet in perfect working order!
If the lever gets stuck or is unused for a long time, it can break
Replace it to keep using your favorite tap handle and keep the beer flowing!
With this brass lever you can renew a worn-out part on your well-used draft faucet. This is the actual lever that opens and closes the faucet, and where the tap handle is threaded on. These levers can break if a faucet is left alone for too long and the lever gets stuck.
5/16" Tailpiece Elbow that is used with a 1" tailpiece hex nut (D1740 / D1741). Fits on couplers and shanks. Requires 1-5/8" clearance above the coupler or behind the shank. Made from stainless steel. ID - 1/4" OD - 5/16"
These stainless short shanks are typically used for attaching faucets to a KOMOS® Cobra style draft tower. The threaded section measures 25mm in length (0.98").
Please Note: When installing Cobra Tower Shanks onto the tower, some exposed threading is normal due to the tower's design and does not impact sealing performance. For a cleaner, professional aesthetic, we recommend using a shank spacer to cover the threads and provide a flush finish against the tower surface.
Perfect for mobile draft dispensing with the NukaTap Mini Beer Faucet Clamp onto a picnic bench or folding table—an ideal option for backyard cookouts or concerts in the park Makes for a great temporary shank for weekend getaways, camping, or tailgating This bracket is compatible with table or bench edges that are up to 3.5" thick. It can be adjusted to have the wing nut clamp in either direction, simply unscrew the flange piece from the threaded rod, then unscrew, then thread from the opposing side. Please note: This item does not include the Mini NukaTap or Shank pieces. It is simply the stainless steel bracket. Recommended Accessories: NukaTap Mini Faucet (D1598) Wall Mount Shank Kit w/ 6.35 mm Duotight (D1598D) Self Closing Spring (D1598A) 6.35 mm OD EVABarrier Tubing (D1723C) KegLand Part Number: KL0407
Tailpieces are fittings which connect beer and gas tubing to the different parts of a draft system. One side of the tailpiece features a barb to connect the tubing to, and the other side is held against the tap or faucet shank with collar nut. Tailpieces are available in a range of barb sizes to fit up to your tubing size. Stainless steel construction means these pieces won’t rust or harbor bacteria that can ruin the taste of your beer. This elbow shaped tailpiece helps you fit your tubing runs in tight spaces, requiring just 1-5/8" clearance above the tap or behind the shank. Use with hex nut (D1740). ID - 3/16" OD - 1/4"
3/8" Tailpiece Elbow that is used with a 1" tailpiece hex nut (D1740 / D1741). Fits on couplers and shanks. Requires 1-5/8" clearance above the coupler or behind the shank. Made from stainless steel. ID - 5/16" OD - 3/8"
This stainless steel drip tray is perfect for the KOMOS Double-Wide kegerator and home bar countertops. At 29.5" in length, this drip tray can comfortably cover up to 8 draft faucets. The grill is removable for easy cleaning.
Features:
Removable grill
Made from stainless steel
29.5" L x 6.7" W x 0.9" D
1/4" tailpieces are ideally used with 3/16" draft line for a tight fit. If you'd prefer to use a different size tubing, the KOMOS coupler can also be purchased bare so you can mix and match your preferred tailpiece sizes. The check valves will need to be installed before first use. The silicone check valve is inserted on the side gas-in port and the check ball and ball retainer are inserted on the top bev-out port. D-style sanke coupler Stainless body Stainless probe PRV rated to 4.5 BAR (65 psi)
Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory.
The KOMOS stainless S-Style coupler is built for European brand kegs including Heineken, Newcastle, Pilsner Urquell, and Stella Artois. Featuring stainless steel body and stainless steel probe, this keg tap is made to last. The coupler comes without fittings so it can be adapted however you sees fit. When assembling, insert the rubber "duck bill" check valve into the side gas-in port. The check ball and ball retainer are placed in the top beverage-out port.
Both gas-in and bev-out ports come bare so you can fit it out exactly how you want it. Maybe you like a larger gas line and smaller beer line—no problem. Or perhaps you're ready to take your draft system into the 21st century with EVABarrier draft tubing and Duotight push-to-connect fittings. Whatever floats your boat, keep your draft setup anchored with the KOMOS keg coupler.
The Green corny keg-style PRV is rated to 4.5 BAR (65 psi). It can be swapped out with PRVs with a higher or lower pressure rating if desired. Always check the pressure rating of your keg before swapping PRVs.
Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory.
If your home draft system is a mix of ball lock kegs and European sanke kegs, having a coupler with ball lock adapters is a huge plus. This allows you to have all your draft lines ending in a ball lock quick disconnect, making it quick and easy to swap lines from sanke keg to ball lock.
Note that the gas-in adapter has a small line cut into the body of the adapter where the bev-out adapter is smooth.
The check valves will need to be installed before first use. The silicone check valve is inserted on the side gas-in port and the check ball and ball retainer are inserted on the top bev-out port.
S-style sanke coupler
Stainless body
Stainless probe
PRV rated to 4.5 BAR (65 psi)
Replacement lever collar for Intertap or NukaTap faucets. This beer faucet part threads onto the lever and sits above the friction bonnet. Used to help adjust your tap handle to face forward if it is oriented at an angle when fully threaded onto the faucet lever.
An easy and inexpensive way to split your CO2 gas line to multiple taps. Made from stainless steel; the metal preferred by homebrewers.
This Stainless Steel CO2 Tee is sized to work best with 5/16" tubing, the standard size used for gas lines. The barbs on this Tee are 0.4" OD. Be sure to order hose clamps to secure your tubing to the tee.
Quick Tips: Place the end of the tubing in 100-120F water for a minute or so to soften before pushing onto the ends of the Tee. We suggest wearing work gloves when putting tubing onto this product as the ends can sometimes be sharp.
Minimize oxygen exposure by flattening the bag before filling to keep your wine, cider, spirits, or cold brew as fresh as the day it was made
This cost-effective tool connects easily to your existing brewing setup with a standard ball lock post, making it a simple and quick solution for refilling bladders without expensive machines
Fill your bag-in-box bladder directly from your brewing vessel. The clever design means the bladder's tap is already in place when full, so it's ready to dispense immediately without extra steps or mess
Tired of tricky transfers that risk oxidizing your wine, cider, spirits, or cold brew? The Bag-In-Box Bladder Refill and Transfer Connector simplifies the process, making it easy to fill bladders without losing quality.
This cost-effective tool lets you forget expensive filling machines and get straight to the good stuff. It's designed to be simple and effective.
Key Features:
Easy Filling: Connect the device to your bladder's tap, engage the knob, and fill it just like you would a keg through the yellow ball lock post.
Minimized Oxidation: Before filling, you can flatten the bag to remove all oxygen, ensuring your beverage stays fresh and delicious.
How it works: Simply attach the connector to your bladder's tap. The ball lock post lets you fill from your brewing setup, making the process quick and seamless. Once full, the tap is already in place for easy dispensing.
KegLand Part Number: KL39253
This handy tool is inserted into the bottom of your keg coupler to lift the ball check valve, allowing you to flush cleaning solution through from the tap without needing to disassemble the keg coupler. A simple solution to save you time while cleaning draft lines.
Comes in a convenient zip lock bag.
The classy way to say "Don't you dare drink my beer!" Do you have a draft system and live with either teenage kids or thirsty roomates? This can potentially be a beer draining arrangement. When you leave for the weekend, stop the flow with a faucet lock. A quick easy locking system that attaches directly to the faucet. Specifically designed for Perlick 630 series draft faucets. For standard beer faucets, please see D1274.
Show everyone you mean business with these 50 caliber BMG beer tap handles. Made from real, once fired, 50 caliber bullets that are hand polished and coated with an anti-tarnish lacquer. The 50 Caliber BMG is used in most of the military's heavy machine guns. A great addition to any man cave!
Fits all US Faucet levers, 3/8” – 16 UNC (Unified Coarse Thread).
Does not come with faucet!
Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory.
With Duotight adapters you can take your draft system into the 21st century with EVABarrier draft line. This double walled tubing offers superior protection against oxidation, CO2 loss and microbial growth. Plus, it's BPA and PVC free! EVA tubing is the future of draft line for professional applications, and now you can rig up your home system with the same first-class tubing.
4 mm x 8 mm EVABarrier is our recommended size for short beer lines in the 5-6 ft. range. 5 mm x 8 mm EVABarrier is recommended for longer beer lines in the 10-12 ft. range.
The KOMOS S-style coupler for European kegs can also be purchased bare if you prefer a different connection style.
S-style sanke coupler
Stainless body
Stainless probe
PRV rated to 4.5 BAR (65 psi)
Replacement flow control shuttles for the Gen 1 NukaTap FC model faucet (D1584). These pieces are only for the flow control apparatus in the faucet, not the NukaShuttle itself. A backwards compatible replacement shuttle for the Gen 2 NukaTap Flow Control Faucet is coming soon. KegLand Part Number: KL17817
Stainless steel splicer designed for connecting two different sizes of tubing together. The smaller barb will accept 3/16 in or 1/4 in ID tubing (typical to homebrew systems) on one side, and the larger barb will accept 5/15 in or 3/8 in ID tubing common to commercial systems. Sold individually.
Yeast require oxygen for growth, make sure you always have some available to oxygenate your wort prior to pitching!
This 20 cubic foot O2 cylinder is good for about 500 batches of beer.
Hate having your disposable oxygen tank run out right before you were about to pitch your yeast? Or just tired of running through disposable tanks in general? Consider stepping up to a refillable oxygen cylinder. Whether you brew big batches or brew frequently, a refillable oxygen tank is a great way to save time and money.
The tank needs to be hydrotested every 10 years and is easily and affordably filled at any participating welding gas company.
Specs:
Cylinder: 20 cu ft
Material: Steel Cylinder – Standard Valve
Capacity: 20 cu ft (566 Liters)
Service Pressure: 2015 PSI / 139 Bar
Test Pressure: 3360 PSI
DOT- and TC- Approved
Valve Type: CGA540
Dimensions:
Diameter: 5.2" (132 mm)
Height: 14.8" (376 mm)
Empty Weight: 14.1 lb
Keep your draft faucet in perfect working order.
Does not react with beer
Is stronger than brass
With this stainless steel lever you can renew & upgrade a worn-out part on your well-used draft faucet. This is the lever that actually opens and closes the faucet, and that the tap handle attaches too. Stainless levers are used to replace broken brass levers because of their strength and ability to not react with beer.
Keep the top of your kegerator clean with this stainless steel countertop-style drip tray. Perfect for placing underneath a draft tower or 4 faucets mounted side-by-side. Removable grill for easy cleaning. Features 5 pressed locations for drilling through and plumbing the drip tray for draining.
Features:
Removable grill
Made from stainless steel
19.6" L x 6.7" W x 0.6" D
Kegland Part number: KL13178
Rinse and chill your glassware before every pour! Install on the countertop of your wet bar or kitchen sink and hook up to your home water supply Invert and push down your glassware to activate the spray action Excellent kitchen accessory for rinsing wine glasses, compact blenders, tumblers, and More!
A push activated glass rinser can be the perfect final touch to your wet bar for the serious home beertender. Install at the edge of your sink and connect to your household's main water supply. Push down in short bursts to rinse your glass of dust, residual dish soap, and to pre-chill the glass before pouring a pint. These compact glass rinsers are capable of withstanding up to 100 psi of pressure. The 1/2" BSP threaded rod is compatible with a number of Duotight attachments. We recommend installing with PE Water Line and this 1/2" adapter. How to Use: Invert glass and empty last drips into sink Press glass onto the center of the glass rinser in short bursts If you have access to an inline carbonated water source, using bubbly water will really give your glasses a stripping clean. This device can also be used with chilled water to cool your glass down in between beverages. 4.3" H x 4.5" W KegLand Part Number: KL27649
Perfect for summertime parties, the low-profile design makes this pump easy to use, store, and transport. At the beach, the park, or in the backyard, the Shorty will provide you with great beer keg after keg. For D style kegs.
Also known as a keg coupler, coupling, or adapter.
Perfect for mobile draft dispensing with the NukaTap Mini Beer Faucet Clamp onto a cooler to make a jockey box without needing to drill out shank holes Makes for a great temporary shank option for kegerators and keezers when you need an extra tap This bracket is compatible with ice chest coolers and fridges that are up to 3.5" thick. It can be adjusted to have the wing nut clamp in either direction, simply unscrew the flange piece from the threaded rod, then unscrew, then thread from the opposing side. Please note: This item does not include the Mini NukaTap or Shank pieces. It is simply the stainless steel bracket. Recommended Accessories: NukaTap Mini Faucet (D1598) Wall Mount Shank Kit w/ 6.35 mm Duotight (D1598D) Self Closing Spring (D1598A) 6.35 mm OD EVABarrier Tubing (D1723C) KegLand Part Number: KL22002
This tailpiece is a replacement for the gas-in barb that comes mounted on our D1505 Sanke Tap. It will not work as a 5/16" beer line connection due to the lip on the back side of the fitting.
Tailpieces are fittings which connect beer and gas tubing to the different parts of a draft system. One side of the tailpiece features a barb to connect the tubing to, and the other side is held against the tap or faucet shank with collar nut.
Tailpieces are available in a range of barb sizes to fit up to your tubing size.
Get your KOMOS Jockey Box hooked up and ready to flow with our preconfigured connection kits! This connection kit includes everything necessary to hook up two Ball Lock kegs to your KOMOS Jockey Box except for the CO2 tank and regulator. Choose the connection kit that matches the number of taps you require and the type of keg being served, add on a regulator or CO2 tank if you do not already own one, and get ready to pour flawless pints!
KOMOS Dual Tap Ball Lock Connection Kit includes:
3 x 5 ft. lengths of 5/16" CO2 Tubing
2 x Ball Lock Gas In Disconnects
2 x Ball Lock Bev Out Disconnects
2 x 5 ft. Beverage Jumpers with Stainless Steel Tailpieces
Two-Way Aluminum Air Manifold
Hose Clamps and Rubber Washers
This Kit Does Not Include a CO2 Tank or Regulator, but both can be added from the drop-down menus above or under "You Might Also Need" below.
With this adapter you can use a KOMOS CO2 regulator with a Nitrogen or Argon tank. Not all CO2 Regulators are suitable for use with a Nitrogen tank. Only for use with KOMOS regulator which is a dual gas regulator capable of handling Nitrogen and CO2 gasses. CGA320 male thread by CGA580 male thread. Compatible with KOMOS Dual Gauge and Dual Body regulators.
This Friction Bonnet is the piece that sits between the body of the faucet and the faucet knob lever Collar. Tightening it compresses a washer and creates resistance when opening and closing the faucet.
Fits all Intertap and Nukatap faucet models.
