Love the Blichmann QuickCarb, but want to use it on a commercial sankey keg? Now's your chance!
Quickly carbonate beer in commercial sankey style kegs
This coupler adapter kit adapts the QuickCarb to work with commercial sanke keg couplers. It also increases the power supplied to the pump to be able to handle full sized 1/2 bbl kegs.
Includes:
2 x coupler wing nuts
2 x 1/4 in male flare
2 x coupler washers
12v DC power adapter
The RipTide™ (Tri-Clamp model only) has been taken to the next level with a design modification to be the ultimate work horse. Now it eliminates the easy-to-loose thrust washer and showcases a PRV vent barb that will allow for mess free priming. This version will improve the overall brewing experience and operation. Again, this change is currently only on the TC RipTide™.
Gone are the days of making do with a general purpose pump such as the March 815 and all the variant imported copies. These pumps are cumbersome to disassemble, difficult to prime to get the wort moving, require the addition of a valve, a switch, and a proper base to hold the pump upright. They also use noisy open motors that must be shielded from liquids. All undesireable attributes for a homebrewing pump! The team of homebrewers at Blichmann Engineering and our friends at March Manufacturing have created the RipTide™ to solve all of these problems!
High performance curved blade impeller and strong rare earth magnets deliver 7 GPM and up to 21ft of head pressure!
Carbon Fiber Dry Run Protection increases the life of your impeller and resists damage during accidental dry runs
Tri-clamp head connection fully disassembles in seconds for easy cleaning
1.5" tri-clamp inlet and outlet connections
Totally enclosed motor is splash proof and super quiet (50 dB)
Integral linear flow valve for superior flow control - don't spend more money for a separate valve and fittings.
Integral air vent valve and partially enclosed impeller design allows you to prime the pump in seconds - no more frustrating air locked pumps!
Stainless steel head rotates 360 degrees to fit in virtually any installation
Large stable base with protective rubber feet keeps the pump from tipping
Convenient power switch on the base
Includes a 10ft long cord with plug (120V)
Base acts as a cord wrap for convenient storage
Assembled in USA from USA and imported components
Discover the enhanced Blichmann Engineering Glycol Chiller — now more efficient than ever! With a powerful 1/2 HP compressor, it delivers cooling capacities of 3100 BTU/hr at 28 degrees Fahrenheit and 3400 BTU/hr at 34 degrees Fahrenheit. Operating quietly, it offers intuitive multi-vessel crashing and fermentation temperature control through a plug-and-play temperature controller dock, making temperature adjustments a breeze. Designed for seamless integration into your existing home brewing setup, it has a compact footprint and organized cable with hose management to avoid unnecessary clutter. Compatible with up to 6 Pump & Controller Kits (optional accessory), this chiller is truly remarkable, and will ensure optimal performance for your brewing needs. Key Features: Powerful 1/2 HP Compressor Cooling capacity of 3100 BTU/hr @ 28°F and 3400 BTU/hr @ 34°F Multi-vessel crashing and fermentation temperature control Convenient plug-and-play temperature controller dock Compatible with up to 6 Pump & Controller Kits (optional) Tidy cable and hose management Small footprint Quiet operation Optional concentrated propylene glycol is offered in a convenient 2.5-gallon jug Lagering Temps Capability: (2) 1 BBL fermenters (4) 1/2 BBL fermenters (6) 7-gallon and 14-gallon fermenters Fermentation Temperature Control Capability: (4) 1 BBL fermenters (6) 7-gallon, 14-gallon, and 1/2 BBL fermenters *Results based on vessels equipped with insulation at an ambient temperature of 75° F.
The connectivity package required to connect the Blichmann BeerGun Bottle Filler to your ball lock keg and CO2 setup. You will also need to split your gas tubing using a Stainless Steel Flare Tee.
The Blichmann Therminator Wort Chiller is one of the most popular tools to use when chilling your wort, as it gets the job done quickly, effectively and without much effort from you. This particular chiller has 40 plates and 316 stainless steel plates and fittings. It features ½ inch MPT for the wort in and out, and a ¾ inch MPT garden hose thread for the water in and out. You’ll be able to chill just like the pros when you use the Blichmann Therminator Wort Chiller, as it is extremely similar to the chillers used in commercial breweries.
The Therminator chiller is small but mighty, with the capability to chill 10 gallons of wort down to 68 degrees when using 58 degree water in just five minutes! It measures an ultra compact 7.5 inches wide, 4 inches deep and 3 inches high, which also makes it very easy to clean and sanitize. It is brazed together with pure copper in an oxygen-free furnace so there are no potential leaks, and it even comes with heavy gauge stainless mounting bracket to keep your system looking sturdy and seamless.
All 316 stainless steel plates and fittings.
Chill like the pro's - Identical to commercial brewery chillers.
Brazed together with pure copper in an oxygen free furnace - no potential leaks like a gasketed unit.
Chill 10 gal in 5 min to 68°F using 58°F cooling water at 5 gpm.
Ultra compact (7.5" W, 4" D, 3" H)
Easy to clean and sanitize - small enough to boil!
Garden hose thread connections on water side - no extra adapters to buy.
1/2" male NPT fittings on wort side mates up with virtually all common hose connector types. Much easier to sanitize than female fittings.
Comes with heavy gauge stainless mounting bracket
Achieve a perfect whirlpool everytime with Blichmann's weldless whirlpool kits. They come with 2 different options for the valves. You can get the Blichmann linear flow valve or a 1.5 in TC butterfly valve. Regardless of which valve you choose you can hook up a pump and get a strong whirlpool action to help you settle out some of that unwanted trub!
Note: These kits require a hole in your kettle of about 13/16 in. You may drill this hole yourself using the instructions in the documents tab or use these kits if your kettle already has a hole.
Lowest Price Guarantee, this item has MAP pricing so you can be confident you won't find it for less.
Blichmann Engineering’s industrial-grade Brewing Gloves are standard issue in commercial breweries. Our own team uses them and wouldn’t brew without them, and we recommend the same for serious homebrewers.
Glove Size:
Medium - Size 9
Large - Size 10
XLarge - Size 11
