Add additional functionality or streamline your process with Brewtools' lineup of brewing accessories for both the Pro Series Brewing Systems and Jacketed Unitank Fermenters.
Coming soon! The newest Brewing Systems and accessories from Brewtools are now available for pre-order. Place your order now and we will automatically ship it to you when it's available. The current estimated availability is January 2027.
Power cable for the B180 Brewing System (230V). The B180 requires 2x power cables.
Connector A: NEMA L6-30
Connector B: LP24, 3-pin female plug
Color: Black
Length: 2m (6.5 ft.)
Coming soon! The newest Brewing Systems and accessories from Brewtools are now available for pre-order. Place your order now and we will automatically ship it to you when it's available. The current estimated availability is January 2027.
This steam condensers fits 2" ports (B50, B100, B180 steam hats) and uses cold water to cool the steam until it becomes a liquid that runs out of the condenser to a bucket or directly to the drain. The unit is an excellent alternative to a ventilation system.
The unit ships with a nozzle that supplies 0.29 gallons of water per minute at 4 bar (58 psi) pressure. We also offer other nozzles that offers higher or lower flow depending on the water pressure where the system is used and other factors (sold separately).
You also need:
TC 2" Clamp and gasket
Water inlet adapter (TC34mm to hose or garden connector etc)
Outlet tube (16x25mm)
A TC34mm elbow is recommended for the water inlet
Please take not that you need much less power to keep the boil going with this device, and the risk of the wort boiling over is high when too much power is used, so make sure to take the necessary precautions. To sustain the vacuum, the drain tube from the condenser must not have any counterpressure. We recommend draining to a bucket where the tube is not submerged in the water, or suspend the tube directly over a floor drain.
Coming soon! The newest Brewing Systems and accessories from Brewtools are now available for pre-order. Place your order now and we will automatically ship it to you when it's available. The current estimated availability is January 2027.
Our patented CleanCore™ 3-way valve sets a new standard for sanitary valve design in brewing and process applications. It has been engineered with a strong focus on hygiene, ease of maintenance, and long-term reliability.
Only two components come into contact with the process fluid: the injection-molded EPDM liner and the stainless steel V-Core valve core. By eliminating unnecessary cavities, crevices, and hidden internal spaces, the design minimizes areas where residue, bacteria, or contaminants can accumulate.
The EPDM liner is a replaceable wear component that can be exchanged in just a few minutes without special tools, making routine maintenance quick and cost-effective while maintaining optimal sanitary performance.
The sealing force between the valve core and the liner can be adjusted using a screw located beneath the handle. This allows the valve to be fine-tuned for the ideal balance between smooth operation and reliable sealing, while also compensating for normal wear over time.
The valve body is manufactured from POK (Polyketone), a highly durable engineering polymer offering excellent chemical resistance and dimensional stability. The handle and valve core are manufactured from 304 stainless steel for outstanding strength, wear resistance, and corrosion protection.
Maximum operating pressure: 1 BAR.
Coming soon! The newest Brewing Systems and accessories from Brewtools are now available for pre-order. Place your order now and we will automatically ship it to you when it's available. The current estimated availability is January 2027.
Our patented CleanCore™ 3-way valve sets a new standard for sanitary valve design in brewing and process applications. It has been engineered with a strong focus on hygiene, ease of maintenance, and long-term reliability.
Only two components come into contact with the process fluid: the injection-molded EPDM liner and the stainless steel V-Core valve core. By eliminating unnecessary cavities, crevices, and hidden internal spaces, the design minimizes areas where residue, bacteria, or contaminants can accumulate.
The EPDM liner is a replaceable wear component that can be exchanged in just a few minutes without special tools, making routine maintenance quick and cost-effective while maintaining optimal sanitary performance.
The sealing force between the valve core and the liner can be adjusted using a screw located beneath the handle. This allows the valve to be fine-tuned for the ideal balance between smooth operation and reliable sealing, while also compensating for normal wear over time.
The valve body is manufactured from POK (Polyketone), a highly durable engineering polymer offering excellent chemical resistance and dimensional stability. The handle and valve core are manufactured from 304 stainless steel for outstanding strength, wear resistance, and corrosion protection.
Maximum operating pressure: 1 BAR.
Coming soon! The newest Brewing Systems and accessories from Brewtools are now available for pre-order. Place your order now and we will automatically ship it to you when it's available. The current estimated availability is January 2027.
Kit with Counterflow Chiller, valves and accessories for use with the Brewtools B100 and B180 Brewing Systems.
A counterflow chiller makes it possible to cool down to fermentation temperature from 40-60 degrees and will speed up your chilling process.
In the box:
Counterflow chiller with TC34mm connections
CleanCore™ 3-way valves, TC1.5", 2 pcs
TC1.5" pipe, 40mm, for connecting the valves
TC34mm to 19mm barb, 2 pcs
TC 1.5" to 19mm barb, 2 pcs
TC34mm to Garden Connector, 2 pcs
Tri clamp, 34mm, 4 pcs
Tri clamp, 1.5", 6 pcs
Silicone tube, 16x25mm, 2x1m
Silicone elbow, 90 degrees, 2pcs
Tube connector, 19mm, POK
TC gaskets, 34mm, DN20 5-pack, 2 pcs
Coming soon! The newest Brewing Systems and accessories from Brewtools are now available for pre-order. Place your order now and we will automatically ship it to you when it's available. The current estimated availability is January 2027.
Kit with Counterflow Chiller, valves and accessories for use with the Brewtools B50 Brewing System.
A counterflow chiller makes it possible to cool down to fermentation temperature from 40-60 degrees and will speed up your chilling process.
In the box:
Counterflow chiller with TC34mm connections
CleanCore™ 3-way valves, TC34mm, 2 pcs
TC34mm pipe, 40mm, for connecting the valves
TC34mm to 19mm barb, 4 pcs
TC34mm to Garden Connector, 2 pcs
Tri clamp, 34mm, 10 pcs
Silicone tube, 16x25mm, 2x1m
Silicone elbow, 90 degrees, 2pcs
Tube connector, 19mm, POK
TC gaskets, 34mm, DN20 5-pack, 2 pcs
Coming soon! The newest Brewing Systems and accessories from Brewtools are now available for pre-order. Place your order now and we will automatically ship it to you when it's available. The current estimated availability is January 2027.
Kit with everything you need to connect our leak free quick connectors to the cooling jacket on your brewing system.
The quick connector is connected to the lower port and the 10mm barb on the upper port to prevent any pressure in the jacket.
Made for Brewtools 8.5x14mm reinforced EVA tube
In the box:
Tri Clamp 34mm, 2 pcs
TC Gasket, 34mm, DN20 5-pack, 1 pcs
TC34mm to 10mm barb
TC34mm to 3/8" F-NPT, 1 pcs
Quick Connector, Female to 3/8" NPT, 1 pcs
Quick Connector, Male to 10mm barb, 1 pcs
You also need:
8.5x14mm EVA-tube required from your water source and to your drain
Adapter from your water source to the 8.5x14mm tube (9-10mm barb)
Low frame with wheels and flat top plate for Brewtools Troll Brew Table System.
Used for placing equipment like glycol chillers or handling malt when using the crane.
Remember M8 bolt kit for connecting to other modules.
Troll Frame With Plate only. Does not include Troll Table pictured in example photo.
Specifications:
Size: 28.75" x 28.75" x 5.9" (assembled)
Weight assembled: 37.5 lbs
Material: AISI 304
In the box:
1 pcs table frame, 28.75" x 28.75"
1 pcs flat top plate with hole
2 pcs wheels with brakes
2 pcs wheels without brakes
4 pcs 20-pack silicone plugs for holes
Tools and bolts for assembly
