{"title":"Fluid Control System","description":"\u003cp\u003eTake control of your brewing process with the Brewtools FCS. This advanced modular system offers precise monitoring, automation, and customization for homebrewers and microbreweries.\u003c\/p\u003e\n\u003cp\u003eThe FCS is a modular control system designed, developed and manufactured by Brewtools in Norway. The vision behind the system is to take industrial technology and make that available for microbreweries and homebrewers. Using the latest electronic component technology and clever software engineering, Brewtools is able to make features that used to be very expensive and complicated available for everyone. The system can measure temperature, pressure, density\/gravity*, level* and power consumption and based on that — control cooling, heating, pressure\/CO2 in, pressure\/CO2 out, agitation*, automatic hop additions* under pressure and more! Fermentation profiles will automate the whole process and give you ultimate control of your fermentation process. (*Not available at first launch.)\u003c\/p\u003e","products":[{"product_id":"brewtools-fluid-control-system-fcs-starter-kit-unitank","title":"Brewtools | Fluid Control System | FCS Starter Kit for Unitank","description":"\u003cul\u003e \u003cli\u003e Advanced Modular Control System: Designed for homebrewers and microbreweries, the Brewtools FCS brings industrial-level precision with features like temperature, pressure, and gravity monitoring for ultimate brewing control. \u003c\/li\u003e \u003cli\u003e Comprehensive Starter Kit: Includes essential components such as FCS Display and I\/O Modules, temperature and pressure sensors, and all necessary cables and adapters to start customizing your fluid control setup. \u003c\/li\u003e \u003cli\u003e Automated Fermentation Profiles: Automate cooling, heating, and pressure management with software-driven profiles, simplifying complex processes while ensuring consistency in your brews. \u003c\/li\u003e \u003cli\u003e Expandable \u0026amp; Customizable: Add solenoids, pumps, airlocks, and adapters to fit your specific brewing needs, compatible with both Brewtools and non-Brewtools tanks. \u003c\/li\u003e \u003cli\u003e Constant Monitoring \u0026amp; Alerts: Early warning notifications for equipment issues like solenoid valves or heating elements ensure smooth operation and protect your brewing investment.\u003c\/li\u003e \u003cli\u003e An upgraded version of the FCS Starter Kit w\/ Density Sensor is also available.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e FCS is a modular control system designed, developed and manufactured by Brewtools in Norway.\u003c\/p\u003e \u003cp\u003e The vision behind the system is to take industrial technology and make that available for microbreweries and homebrewers. Using the latest electronic component technology and clever software engineering, Brewtools is able to make features that used to be very expensive and complicated available for everyone.\u003c\/p\u003e \u003cp\u003e The system can measure temperature, pressure, density\/gravity*, level* and power consumption and based on that — control cooling, heating, pressure\/CO2 in, pressure\/CO2 out, agitation*, automatic hop additions* under pressure and more! Fermentation profiles will automate the whole process and give you ultimate control of your fermentation process.\u003cstrong\u003e (*Not available at first launch.)\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e The system will also constantly monitor the process and notify you if something isn't right. For example, the system will measure the current draw of solenoid valves and heating elements, and will notify you if these components aren't working as they should.\u003c\/p\u003e \u003cp\u003e \u003cstrong\u003ePlease Note:\u003c\/strong\u003e The software is currently in a state of \u003cstrong\u003e\u003cem\u003e\u003cspan style=\"background-color:#ffff0;\"\u003eearly adopter beta\u003c\/span\u003e\u003c\/em\u003e\u003c\/strong\u003e, and should not be used for critical production. Brewtools will continue to develop software and new sensors\/actuators based on customer feedback and requests. If you cannot find a sensor or actuator that fits your setup, please reach out to us and let us know.\u003c\/p\u003e \u003cp\u003e Note that we do not take responsibility for any lost\/destroyed beer or raw materials.\u003c\/p\u003e \u003cp\u003e \u003c\/p\u003e \u003ch3\u003e Brewtools FCS Starter Kit\u003c\/h3\u003e \u003cp\u003e The Brewtools FCS Starter Kit includes all the essential parts to get you started setting up your own custom-designed Fluid Control System.\u003c\/p\u003e \u003cul\u003e \u003cli\u003e FCS Display Module and FCS I\/O Module with power supply\u003c\/li\u003e \u003cli\u003e 1 temperature sensor (TC 1.5\" 160mm)\u003c\/li\u003e \u003cli\u003e 1 pressure sensor with gas out solenoid\u003c\/li\u003e \u003cli\u003e All cables and adapters needed (3m length)\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e The kit does not include a valve\/pump for cooling as these are tank dependent, and you may already have a solenoid for your existing glycol loop.\u003c\/p\u003e \u003cp\u003e For non-Brewtools tanks, you also may need an adapter and\/or tee to connect the spunding valve\/pressure sensor assembly.\u003c\/p\u003e \u003cp\u003e \u003cstrong\u003eAccessories\u003c\/strong\u003e\u003cbr\u003e To complete your FCS kit setup, some accessories are needed.\u003c\/p\u003e \u003cul\u003e \u003cli\u003e A solenoid for cooling (Ø4.5mm - 34mm or 1.5\") with 2-pin LP12 cable and DIN43650 Type A adapter or a submersible pump (comes with cable).\u003c\/li\u003e \u003c\/ul\u003e \u003cul\u003e \u003cli\u003e A ball clamp and a connecting rod.\u003c\/li\u003e \u003c\/ul\u003e \u003cul\u003e \u003cli\u003e An airlock for the pressure out solenoid valve is recommended. For smaller tanks we recommend our polycarbonate airlock. For larger tanks (300l+) you should use a TC34mm to 12mm barb and a 10x16mm silicone tube or equivalent.\u003c\/li\u003e \u003c\/ul\u003e \u003cul\u003e \u003cli\u003e Tri-Clamps and gaskets. Based on your tank and setup, you may need some extra tri-clamps or gaskets.\u003c\/li\u003e \u003c\/ul\u003e \u003cul\u003e \u003cli\u003e For MiniUni+, you need to replace the Mini Spunding valve with an M24 to Tri Clamp adapter and a 90 degree TC34mm elbow to fit your spunding assembly (if you want to use our TC air lock. No need for elbow if you use tubing as airlock). Rembember clamps\/gaskets.\u003c\/li\u003e \u003c\/ul\u003e \u003cul\u003e \u003cli\u003e If you don't have a Brewtools Unitank, we recommend getting TC 1.5\" to 34mm adapter for the spunding setup. You will also need a 34mm Tri-Clamp and 34mm gasket. Tees and crosses are also available in multiple sizes to give you more ports.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e \u003cstrong\u003eStarter Kit Included Parts:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e FCS Display Module, 5\"\u003c\/li\u003e \u003cli\u003e FCS I\/O Module 2x RTD, 5x CAN, 4x Relay\u003c\/li\u003e \u003cli\u003e Power Supply, 24V 40W, LP12-pin\u003c\/li\u003e \u003cli\u003e Pressure Sensor, CAN BUS 24V, M12\u003c\/li\u003e \u003cli\u003e Solenoid valve, TC34mm + M12, DC24V Ø2.0\u003c\/li\u003e \u003cli\u003e Temp Sensor, PT100, TC 1.5\", 160mm\u003c\/li\u003e \u003cli\u003e Cable, LP12 6-pin, 3m\u003c\/li\u003e \u003cli\u003e Cable, LP12 5-pin, 3m\u003c\/li\u003e \u003cli\u003e Cable, LP12 3-pin, 3m\u003c\/li\u003e \u003cli\u003e Cable, LP12-pin, 3m\u003c\/li\u003e \u003cli\u003e Adapter, LP12-pin to DIN 43650 Type B\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e \u003cstrong\u003eRecommended Separate Parts:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e Solenoid valve for cooling with adapters\/cables or submersible pump\u003c\/li\u003e \u003cli\u003e Ball Mount connector and pipe clamp etc.\u003c\/li\u003e \u003cli\u003e Airlock (Top mounted or barb with silicone tube)\u003c\/li\u003e \u003cli\u003e Adapters and fittings to fit your tank\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e Brewtools Product Number: 7713567\u003c\/p\u003e","brand":"BrewTools","offers":[{"title":"Default Title","offer_id":51917969031457,"sku":"BT1300","price":861.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/7521\/2321\/files\/62047.png?v=1760501542"},{"product_id":"brewtools-fluid-control-system-fcs-starter-kit-unitank-density-sensor","title":"Brewtools | Fluid Control System | FCS Starter Kit for Unitank | Density Sensor","description":"\u003cp style=\"text-align: center;\"\u003e \u003cstrong\u003e\u003cimg alt=\"\" src=\"\/web_files\/intranet.morebeer.mom\/images\/Brewtools-FCS-Banner%20(1).png\" style=\"height: 100%;\"\u003e\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e Advanced Modular Control System: Designed for homebrewers and microbreweries, the Brewtools FCS brings industrial-level precision with features like temperature, pressure, and gravity monitoring for ultimate brewing control. \u003c\/li\u003e \u003cli\u003e Comprehensive Starter Kit: Includes essential components such as FCS Display and I\/O Modules, temperature and pressure sensors, and all necessary cables and adapters to start customizing your fluid control setup. \u003c\/li\u003e \u003cli\u003e Automated Fermentation Profiles: Automate cooling, heating, and pressure management with software-driven profiles, simplifying complex processes while ensuring consistency in your brews. \u003c\/li\u003e \u003cli\u003e Expandable \u0026amp; Customizable: Add solenoids, pumps, airlocks, and adapters to fit your specific brewing needs, compatible with both Brewtools and non-Brewtools tanks. \u003c\/li\u003e \u003cli\u003e Constant Monitoring \u0026amp; Alerts: Early warning notifications for equipment issues like solenoid valves or heating elements ensure smooth operation and protect your brewing investment.\u003c\/li\u003e \u003cli\u003e This version of the FCS Kit includes the Density\/Temp Sensor which replaces the temperature-only sensor in the basic FCS Starter Kit.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e FCS is a modular control system designed, developed and manufactured by Brewtools in Norway.\u003c\/p\u003e \u003cp\u003e The vision behind the system is to take industrial technology and make that available for microbreweries and homebrewers. Using the latest electronic component technology and clever software engineering, Brewtools is able to make features that used to be very expensive and complicated available for everyone.\u003c\/p\u003e \u003cp\u003e The system can measure temperature, pressure, density\/gravity*, level* and power consumption and based on that — control cooling, heating, pressure\/CO2 in, pressure\/CO2 out, agitation*, automatic hop additions* under pressure and more! Fermentation profiles will automate the whole process and give you ultimate control of your fermentation process.\u003cstrong\u003e (*Not available at first launch.)\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e The system will also constantly monitor the process and notify you if something isn't right. For example, the system will measure the current draw of solenoid valves and heating elements, and will notify you if these components aren't working as they should.\u003c\/p\u003e \u003cp\u003e \u003cstrong\u003ePlease Note:\u003c\/strong\u003e The software is currently in a state of \u003cstrong\u003e\u003cem\u003e\u003cspan style=\"background-color:#ffff0;\"\u003eearly adopter beta\u003c\/span\u003e\u003c\/em\u003e\u003c\/strong\u003e, and should not be used for critical production. Brewtools will continue to develop software and new sensors\/actuators based on customer feedback and requests. If you cannot find a sensor or actuator that fits your setup, please reach out to us and let us know.\u003c\/p\u003e \u003cp\u003e Note that we do not take responsibility for any lost\/destroyed beer or raw materials.\u003c\/p\u003e \u003cp\u003e \u003c\/p\u003e \u003ch3\u003e Brewtools FCS Starter Kit\u003c\/h3\u003e \u003cp\u003e The Brewtools FCS Starter Kit includes all the essential parts to get you started setting up your own custom-designed Fluid Control System.\u003c\/p\u003e \u003cul\u003e \u003cli\u003e FCS Display Module and FCS I\/O Module with power supply\u003c\/li\u003e \u003cli\u003e 1 density\/temp sensor (TC 1.5\")\u003c\/li\u003e \u003cli\u003e 1 pressure sensor with gas out solenoid\u003c\/li\u003e \u003cli\u003e All cables and adapters needed (3m length)\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e The kit does not include a valve\/pump for cooling as these are tank dependent, and you may already have a solenoid for your existing glycol loop.\u003c\/p\u003e \u003cp\u003e For non-Brewtools tanks, you also may need an adapter and\/or tee to connect the spunding valve\/pressure sensor assembly.\u003c\/p\u003e \u003cp\u003e \u003cstrong\u003eAccessories\u003c\/strong\u003e\u003cbr\u003e To complete your FCS kit setup, some accessories are needed.\u003c\/p\u003e \u003cul\u003e \u003cli\u003e A solenoid for cooling (Ø4.5mm - 34mm or 1.5\") with 2-pin LP12 cable and DIN43650 Type A adapter or a submersible pump (comes with cable).\u003c\/li\u003e \u003c\/ul\u003e \u003cul\u003e \u003cli\u003e A ball clamp and a connecting rod.\u003c\/li\u003e \u003c\/ul\u003e \u003cul\u003e \u003cli\u003e An airlock for the pressure out solenoid valve is recommended. For smaller tanks we recommend our polycarbonate airlock. For larger tanks (300L+) you should use a TC34mm to 12mm barb and a 10x16mm silicone tube or equivalent.\u003c\/li\u003e \u003c\/ul\u003e \u003cul\u003e \u003cli\u003e Tri-Clamps and gaskets. Based on your tank and setup, you may need some extra tri-clamps or gaskets.\u003c\/li\u003e \u003c\/ul\u003e \u003cul\u003e \u003cli\u003e For MiniUni+, you need to replace the Mini Spunding valve with an M24 to Tri Clamp adapter and a 90 degree TC34mm elbow to fit your spunding assembly (if you want to use our TC air lock. No need for elbow if you use tubing as airlock). Remember clamps\/gaskets.\u003c\/li\u003e \u003c\/ul\u003e \u003cul\u003e \u003cli\u003e If you don't have a Brewtools Unitank, we recommend getting a TC 1.5\" to 34mm adapter for the spunding setup. You will also need a 34mm Tri-Clamp and 34mm gasket. Tees and crosses are also available in multiple sizes to give you more ports.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e \u003cstrong\u003eSetting Up the FCS for Your Tank\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e \u003cstrong\u003eMounting\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e To mount to your tank a ball clamp and a connecting rod are very useful. This will work with most any size or style tank.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e \u003cstrong\u003eSolenoid Valve \u0026amp; Related Connection Hardware for Cooling\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e For Brewtools tanks that use 34mm connection you will need a Ø4.5mm - 34mm solenoid valve. For BrewBuilt, Spike, Ss BrewTech, or Commercial tanks you will need a TC 1.5\" to 34mm adapter and 1.5\" TC Solenoid Valve. Either way, you will need a 2-pin LP12 cable and DIN43650 Type A adapter to connect the solenoid valve to the Brewtools FCS I\/O Module.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e \u003cstrong\u003eWould You Like a Visible Air Lock on the Spunding Valve?\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e The Brewtools pressure relief solenoid spunding valve releases CO2 at the set point you choose on your controller. To visually see the CO2 release, adding on an airlock for the pressure out solenoid valve is a nice option. For tanks under 300L, we recommend the 34mm polycarbonate airlock that connects to the Brewtools Solenoid Valve. For tanks larger than 300L, you should use a blowoff. For blowoffs, use a TC34mm to 12mm barb and a 10x16mm silicone tube or equivalent ran into a bucket of water. You will also need a 34mm Tri-Clamp and 34mm gasket. Tees and crosses are also available in multiple sizes to give you more ports.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e \u003cstrong\u003eFor the MiniUni+\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e For MiniUni+, you need to replace the Mini Spunding Valve with an M24 to TC adapter and a 90-degree 34mm TC elbow to fit your spunding assembly (if you want to use the TC air lock. No need for elbow if you use tubing for a blowoff). You will need the clamps\/gaskets to make the connection.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e \u003c\/p\u003e \u003cp\u003e \u003cstrong\u003eStarter Kit Included Parts:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e FCS Display Module, 5\"\u003c\/li\u003e \u003cli\u003e FCS I\/O Module 2x RTD, 5x CAN, 4x Relay\u003c\/li\u003e \u003cli\u003e Power Supply, 24V 40W, LP12-pin\u003c\/li\u003e \u003cli\u003e Pressure Sensor, CAN BUS 24V, M12\u003c\/li\u003e \u003cli\u003e Solenoid valve, TC34mm + M12, DC24V Ø2.0\u003c\/li\u003e \u003cli\u003e Density\/Temp Sensor, TC 1.5\", CAN BUS 24V\u003c\/li\u003e \u003cli\u003e Cable, LP12 6-pin, 3m\u003c\/li\u003e \u003cli\u003e Cable, LP12 5-pin, 3m (2 pcs)\u003c\/li\u003e \u003cli\u003e Cable, LP12-pin, 3m\u003c\/li\u003e \u003cli\u003e Adapter, LP12-pin to DIN 43650 Type B\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e \u003cstrong\u003eRecommended Separate Parts:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e Solenoid valve for cooling with adapters\/cables or submersible pump\u003c\/li\u003e \u003cli\u003e Ball Mount connector and pipe clamp etc.\u003c\/li\u003e \u003cli\u003e Airlock (Top mounted or barb with silicone tube)\u003c\/li\u003e \u003cli\u003e Adapters and fittings to fit your tank\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e Brewtools Product Number: 7713792\u003c\/p\u003e","brand":"BrewTools","offers":[{"title":"Default Title","offer_id":51918014906657,"sku":"BT1312","price":1077.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/7521\/2321\/files\/64231.png?v=1760505445"},{"product_id":"brewtools-fluid-control-system-fcs-starter-kit-pro-tanks","title":"Brewtools | Fluid Control System | FCS Starter Kit for Pro Tanks","description":"\u003cp style=\"text-align: center;\"\u003e \u003cstrong\u003e\u003cimg alt=\"\" src=\"\/web_files\/intranet.morebeer.mom\/images\/Brewtools-FCS-Banner%20(1).png\" style=\"height: 100%;\"\u003e\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e Advanced Modular Control System: Designed for homebrewers and microbreweries, the Brewtools FCS brings industrial-level precision with features like temperature, pressure, and gravity monitoring for ultimate brewing control. \u003c\/li\u003e \u003cli\u003e Comprehensive Starter Kit: Includes essential components such as FCS Display and I\/O Modules, temperature and pressure sensors, and all necessary cables and adapters to start customizing your fluid control setup. \u003c\/li\u003e \u003cli\u003e Automated Fermentation Profiles: Automate cooling, heating, and pressure management with software-driven profiles, simplifying complex processes while ensuring consistency in your brews. \u003c\/li\u003e \u003cli\u003e Expandable \u0026amp; Customizable: Add solenoids, pumps, airlocks, and adapters to fit your specific brewing needs, compatible with both Brewtools and non-Brewtools tanks. \u003c\/li\u003e \u003cli\u003e Constant Monitoring \u0026amp; Alerts: Early warning notifications for equipment issues like solenoid valves or heating elements ensure smooth operation and protect your brewing investment.\u003c\/li\u003e \u003cli\u003e This version of the FCS Kit includes the Density\/Temp Sensor which replaces the temperature-only sensor in the basic FCS Starter Kit.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e FCS is a modular control system designed, developed and manufactured by Brewtools in Norway.\u003c\/p\u003e \u003cp\u003e The vision behind the system is to take industrial technology and make that available for microbreweries and homebrewers. Using the latest electronic component technology and clever software engineering, Brewtools is able to make features that used to be very expensive and complicated available for everyone.\u003c\/p\u003e \u003cp\u003e The system can measure temperature, pressure, density\/gravity, level* and power consumption and based on that — control cooling, heating, pressure\/CO2 in, pressure\/CO2 out, agitation*, automatic hop additions* under pressure and more! Fermentation profiles will automate the whole process and give you ultimate control of your fermentation process.\u003cstrong\u003e (*Not available at first launch.)\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e The system will also constantly monitor the process and notify you if something isn't right. For example, the system will measure the current draw of solenoid valves and heating elements, and will notify you if these components aren't working as they should.\u003c\/p\u003e \u003cp\u003e \u003cstrong\u003ePlease Note:\u003c\/strong\u003e The software is currently in a state of \u003cstrong\u003e\u003cem\u003e\u003cspan style=\"background-color: rgb(255, 255, 0);\"\u003eearly adopter beta\u003c\/span\u003e\u003c\/em\u003e\u003c\/strong\u003e, and should not be used for critical production. Brewtools will continue to develop software and new sensors\/actuators based on customer feedback and requests. If you cannot find a sensor or actuator that fits your setup, please reach out to us and let us know.\u003c\/p\u003e \u003cp\u003e Note that we do not take responsibility for any lost\/destroyed beer or raw materials.\u003c\/p\u003e \u003cp\u003e \u003c\/p\u003e \u003ch3\u003e Brewtools FCS Starter Kit for Pro Tanks\u003c\/h3\u003e \u003cp\u003e This kit includes everything you would normally need to install the system on a \"standard\" tank. It comes with two TC 1.5\" tees (short) and parts needed to connect your existing solenoids for cooling. The solenoid for gas out is also made for larger tanks.\u003c\/p\u003e \u003cul\u003e \u003cli\u003e FCS Display Module and FCS I\/O Module with power supply\u003c\/li\u003e \u003cli\u003e Density sensor (300mm)\u003c\/li\u003e \u003cli\u003e 1 pressure sensor with gas out pro solenoid\u003c\/li\u003e \u003cli\u003e Tiny Relay Module for wiring your cooling solenoid\u003c\/li\u003e \u003cli\u003e 2x TC Tees, clamps and gaskets\u003c\/li\u003e \u003cli\u003e All cables and adapters needed (3m length)\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e The kit does not include a valve\/pump for cooling as these are tank dependent, and you may already have a solenoid for your existing glycol loop.\u003c\/p\u003e \u003cp\u003e For non-Brewtools tanks, you also may need an adapter and\/or tee to connect the spunding valve\/pressure sensor assembly.\u003c\/p\u003e \u003cp\u003e \u003cstrong\u003eAccessories\u003c\/strong\u003e\u003cbr\u003e To complete your FCS kit setup, some accessories are needed.\u003c\/p\u003e \u003cul\u003e \u003cli\u003e A solenoid for cooling (Ø4.5mm - 34mm or 1.5\") with 2-pin LP12 cable and DIN43650 Type A adapter or a submersible pump (comes with cable).\u003c\/li\u003e \u003c\/ul\u003e \u003cul\u003e \u003cli\u003e A blowoff for the pressure out solenoid valve is recommended. You will need a 1.5\" TC adapter to connect to your preferred blowoff tubing.\u003c\/li\u003e \u003c\/ul\u003e \u003cul\u003e \u003cli\u003e Tri-Clamps and gaskets. Based on your tank and setup, you may need some extra tri-clamps or gaskets.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e \u003cstrong\u003eSetting Up the FCS for Your Tank\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e \u003cstrong\u003eSolenoid Valve \u0026amp; Related Connection Hardware for Cooling\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e For Brewtools tanks that use 34mm connection you will need a Ø4.5mm - 34mm solenoid valve. For Commercial tanks you will need a TC 1.5\" to 34mm adapter and 1.5\" TC Solenoid Valve. Either way, you will need a 2-pin LP12 cable and DIN43650 Type A adapter to connect the solenoid valve to the Brewtools FCS I\/O Module.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e \u003cstrong\u003eWould You Like a Visible Air Lock on the Spunding Valve?\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e The Brewtools pressure relief solenoid spunding valve releases CO2 at the set point you choose on your controller. To visually see the CO2 release, add a blowoff to the pressure relief solendoid using a 1.5\" TC adapter to your preferred tubing size.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e \u003c\/p\u003e \u003cp\u003e \u003cstrong\u003eStarter Kit Included Parts:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e FCS Display Module, 5\"\u003c\/li\u003e \u003cli\u003e FCS I\/O Module 2x RTD, 5x CAN, 4x Relay\u003c\/li\u003e \u003cli\u003e Power Supply, 24V 40W, LP12-pin\u003c\/li\u003e \u003cli\u003e Pressure Sensor, CAN BUS 24V, M12\u003c\/li\u003e \u003cli\u003e Solenoid valve, TC1.5\" + M12, DC24V Ø2.0\u003c\/li\u003e \u003cli\u003e Density\/Temp Sensor 300mm, TC 1.5\", CAN BUS 24V\u003c\/li\u003e \u003cli\u003e Cable, LP12 6-pin, 3m\u003c\/li\u003e \u003cli\u003e Cable, LP12 5-pin, 3m (2 pcs)\u003c\/li\u003e \u003cli\u003e Cable, LP12-pin, 3m (2 pcs)\u003c\/li\u003e \u003cli\u003e Adapter, LP12-pin to DIN 43650 Type B\u003c\/li\u003e \u003cli\u003e FCS Tiny Relay Module\u003c\/li\u003e \u003cli\u003e TC Tee 1.5\", L=90mm (2 pcs)\u003c\/li\u003e \u003cli\u003e Tri Clamps og gaskets (1.5\")\u003c\/li\u003e \u003cli\u003e Ball mount for pipes (28,33,38mm) and connecting joint\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e \u003c\/p\u003e","brand":"BrewTools","offers":[{"title":"Default Title","offer_id":51918123073825,"sku":"BT1317","price":1400.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/7521\/2321\/files\/65138.png?v=1760508903"}],"url":"https:\/\/morebeer.mom\/collections\/fluid-control-system.oembed","provider":"MoreBeer!","version":"1.0","type":"link"}