{"title":"Brewtools Unitank Fermenters","description":"\u003cp\u003eBrewtools Unitanks are fermenters made for ambitious homebrewers and small breweries. Rather than an in-solution cooling apparatus, these tanks feature a cooling jacket in the vertical walls to offer efficient cooling without the hassle of cleaning a coil after every batch. Featuring their trademark PureBlast™ surface inside and out which eliminates the use of waste and polishing compounds and doesn't require passivation. Designed and manufactured with special attention to safety and quality.\u003c\/p\u003e\n\u003cp\u003eThe MiniUni™ series is the newest addition to the Brewtools stainless fermenter lineup, offering simplicity and quality craftmanship at a lower introductory cost. These units are still fully pressurizable and made from 304 stainless steel with PureBlast™ surface inside and out.\u003c\/p\u003e","products":[{"product_id":"brewtools-f40-unitank-52105-gallon-capacity-2040l","title":"Brewtools | F40 Unitank | 5.2-10.5 Gallon Capacity | 20-40L","description":"\u003cul\u003e \u003cli\u003e Ferment, cold crash, and carbonate beer all in one vessel with the Brewtools F-Series Unitank\u003c\/li\u003e \u003cli\u003e Cooling jacket welded to the vertical walls of the tank provide superior cooling capabilities compared to in-solution cooling coils\u003c\/li\u003e \u003cli\u003e Made from stainless steel throughout with Brewtools' proprietary PureBlast™ surface—no passivation required, simply rinse with warm water before your first use\u003c\/li\u003e \u003cli\u003e Pressure rated to 30 PSI so you can safely ferment under pressure and pressure transfer finished beer to kegs with virtually no oxygen pickup\u003c\/li\u003e \u003cli\u003e Brewtools is a Norwegian brand known for high-quality products made without compromise. From brewing systems to fermenters, they continue to push the envelope of innovation for homebrewers around the globe\u003c\/li\u003e \u003cli\u003e All valves, fittings, and gaskets come included\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e Brewtools Unitanks are fermenters made for ambitious homebrewers and small breweries. As part of the Brewtools identity, they've explored new techniques and solutions. This has resulted in a series of high-end fermentation tanks with new features and a lot of possibilities.\u003c\/p\u003e \u003cp\u003e \u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e Brewtools PureBlast™ surface inside and out which eliminate the use of wax and polishing compounds and does not require passivation\u003c\/li\u003e \u003cli\u003e Cooling jacket in the vertical walls offers efficient cooling without the hassle of cleaning a coil\u003c\/li\u003e \u003cli\u003e Many options for connecting accessories like sensors, heaters, carb. stones and other accessories\u003c\/li\u003e \u003cli\u003e Conical pressure rated for 2 bar \/ 30 PSI\u003c\/li\u003e \u003cli\u003e Cooling jacket pressure rated for 0.5 bar \/ 7 PSI\u003c\/li\u003e \u003cli\u003e 8\" TC port on top for easy access\u003c\/li\u003e \u003cli\u003e 2\" TC dump and racking valves\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e Brewtools Unitanks are designed and manufactured with special attention to safety and quality. They are tested and certified according to the requirements for PED 2014\/68\/EU by a third party.\u003c\/p\u003e \u003cp\u003e \u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e Low height w\/o acc.: 32.6\"\u003c\/li\u003e \u003cli\u003e Max height w\/o acc.: 40.5\"\u003c\/li\u003e \u003cli\u003e Packaging size: 33.4\" (h) x 20.5\" (w) x 20.5\" (d) \u003c\/li\u003e \u003cli\u003e Net weight: 84 lbs\u003c\/li\u003e \u003cli\u003e Gross weight: 98 lbs\u003c\/li\u003e \u003cli\u003e Tank diameter (inside): Ø15.75\"\u003c\/li\u003e \u003cli\u003e Gross volume: 13.5 gal\u003c\/li\u003e \u003cli\u003e Max rec. volume: 10.5 gal\u003c\/li\u003e \u003cli\u003e Min rec. volume: 5.3 gal\u003c\/li\u003e \u003cli\u003e Volume, cone: 3.1 gal\u003c\/li\u003e \u003cli\u003e Material: 1.5mm stainless steel (SS304)\u003c\/li\u003e \u003cli\u003e Operating pressure: 1.0 bar \/ 15 PSI\u003c\/li\u003e \u003cli\u003e Max pressure: 2.0 bar \/ 30 PSI\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e \u003cstrong\u003eIn the box:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e Unitank with adjustable frame\u003c\/li\u003e \u003cli\u003e 1 pcs Analog pressure gauge, TC34mm\u003c\/li\u003e \u003cli\u003e 2 pcs Butterfly-valve, 2\"\u003c\/li\u003e \u003cli\u003e 1 pcs Butterfly-valve, 34mm DN20\u003c\/li\u003e \u003cli\u003e 1 pcs Blow-off pipe\u003c\/li\u003e \u003cli\u003e 1 pcs Racking arm 2\"\u003c\/li\u003e \u003cli\u003e 1 pcs TC elbow 90°, 2\"\u003c\/li\u003e \u003cli\u003e 1 pcs Insulation jacket, black neoprene\u003c\/li\u003e \u003cli\u003e 1 pcs Sample valve, 34mm\u003c\/li\u003e \u003cli\u003e 1 pcs TC Adapter 8\"-3\"\u003c\/li\u003e \u003cli\u003e 1 pcs TC blind cap, 3\"\u003c\/li\u003e \u003cli\u003e 1 pcs TC blind cap 2\"\u003c\/li\u003e \u003cli\u003e 2 pcs TC blind cap 1.5\"\u003c\/li\u003e \u003cli\u003e 3 pcs TC blind cap 34mm\u003c\/li\u003e \u003cli\u003e 2 pcs TC gasket 8\" lipped\u003c\/li\u003e \u003cli\u003e 2 pcs TC gasket 3\"\u003c\/li\u003e \u003cli\u003e 2 pcs TC gasket 2\" 5-pack\u003c\/li\u003e \u003cli\u003e 1 pcs TC gasket 1.5\" 5-pack\u003c\/li\u003e \u003cli\u003e 3 pcs TC gasket 34mm 5-pack (DN20)\u003c\/li\u003e \u003cli\u003e 1 pcs Tri Clamp 8\"\u003c\/li\u003e \u003cli\u003e 1 pcs Tri Clamp 3\"\u003c\/li\u003e \u003cli\u003e 5 pcs Tri Clamp 2\"\u003c\/li\u003e \u003cli\u003e 2 pcs Tri Clamp 1.5\"\u003c\/li\u003e \u003cli\u003e 10 pcs Tri Clamp 34mm\u003c\/li\u003e \u003cli\u003e 1 pcs TC tool\u003c\/li\u003e \u003cli\u003e 4 pcs M10 steel\/rubber feet\u003c\/li\u003e \u003cli\u003e 1 pcs TC34mm safety valve (PRV, 2 bar)\u003c\/li\u003e \u003cli\u003e Necessary bolts and parts for assembly\u003c\/li\u003e \u003cli\u003e \u003cstrong\u003e5 year manufacturer's warranty\u003c\/strong\u003e\n\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e Recommended accessories include: HopDrop-kit, Thermowells for your sensors, 34mm Ball-Lock gas adapter for CO2 filling, Coil for sample valve, Spunding valve, Hose barbs for filling and dumping, etc.\u003c\/p\u003e \u003cp\u003e \u003cstrong\u003eFor User Manuals and support, please follow this link to \u003ca href=\"https:\/\/docs.brewtools.com\/user-manuals\/fermentation\/unitank\" target=\"_blank\"\u003eBrewtools Docs\u003c\/a\u003e.\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e \u003cem\u003eNOTE: Model in photo is a prototype. Minor changes and improvements may occur.\u003c\/em\u003e\u003c\/p\u003e \u003cdiv class=\"iframe-container\"\u003e \u003ciframe allowfullscreen=\"\" frameborder=\"0\" src=\"https:\/\/www.youtube.com\/embed\/-N25PQ8EHUg?modestbranding=1\u0026amp;rel=0\"\u003e\u003c\/iframe\u003e\n\u003c\/div\u003e \u003cstyle type=\"text\/css\"\u003e .iframe-container{ position: relative; width: 100%; max-height: 65vh; padding-bottom: 56.25%; height: 0; } .iframe-container iframe{ position: absolute; top:0; left: 0; width: 100%; height: 100%; } @media screen and (min-width: 992px) { .iframe-container{ transform: scale(0.8); } }\u003c\/style\u003e","brand":"BrewTools","offers":[{"title":"Default Title","offer_id":51917300039969,"sku":"BT1007","price":2282.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/7521\/2321\/files\/49596.jpg?v=1760465929"},{"product_id":"brewtools-f80-unitank-52198-gallon-capacity-2075l","title":"Brewtools | F80 Unitank | 5.2-19.8 Gallon Capacity | 20-75L","description":"\u003cul\u003e \u003cli\u003e Ferment, cold crash, and carbonate beer all in one vessel with the Brewtools F-Series Unitank\u003c\/li\u003e \u003cli\u003e Cooling jacket welded to the vertical walls of the tank provide superior cooling capabilities compared to in-solution cooling coils\u003c\/li\u003e \u003cli\u003e Made from stainless steel throughout with Brewtools' proprietary PureBlast™ surface—no passivation required, simply rinse with warm water before your first use\u003c\/li\u003e \u003cli\u003e Pressure rated to 30 PSI so you can safely ferment under pressure and pressure transfer finished beer to kegs with virtually no oxygen pickup\u003c\/li\u003e \u003cli\u003e Brewtools is a Norwegian brand known for high-quality products made without compromise. From brewing systems to fermenters, they continue to push the envelope of innovation for homebrewers around the globe\u003c\/li\u003e \u003cli\u003e All valves, fittings, and gaskets come included\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e Brewtools Unitanks are fermenters made for ambitious homebrewers and small breweries. As part of the Brewtools identity, they've explored new techniques and solutions. This has resulted in a series of high-end fermentation tanks with new features and a lot of possibilities.\u003c\/p\u003e \u003cp\u003e \u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e Brewtools PureBlast™ surface inside and out which eliminate the use of wax and polishing compounds and does not require passivation\u003c\/li\u003e \u003cli\u003e Cooling jacket in the vertical walls offers efficient cooling without the hassle of cleaning a coil\u003c\/li\u003e \u003cli\u003e Many options for connecting accessories like sensors, heaters, carb. stones and other accessories\u003c\/li\u003e \u003cli\u003e Pressure rated for 2 bar \/ 30 PSI\u003c\/li\u003e \u003cli\u003e \u003cdiv\u003e Cooling jacket pressure rated for 0.5 bar \/ 7 PSI\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e 8\" TC port on top for easy access\u003c\/li\u003e \u003cli\u003e 2\" TC dump and racking valves\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e Brewtools Unitanks are designed and manufactured with special attention to safety and quality. They are tested and certified according to the requirements for PED 2014\/68\/EU by a third party.\u003c\/p\u003e \u003cp\u003e \u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e Low height w\/o acc.: 43.3\"\u003c\/li\u003e \u003cli\u003e Max height w\/o acc.: 51.2\"\u003c\/li\u003e \u003cli\u003e Packaging size: 44.5\" (h) x 20.5\" (w) x 20.5\" (d) \u003c\/li\u003e \u003cli\u003e Net weight: 99 lbs\u003c\/li\u003e \u003cli\u003e Gross weight: 110 lbs\u003c\/li\u003e \u003cli\u003e Tank diameter (inside): Ø15.75\"\u003c\/li\u003e \u003cli\u003e Gross volume: 22.7 gal\u003c\/li\u003e \u003cli\u003e Max rec. volume: 21.1 gal\u003c\/li\u003e \u003cli\u003e Min rec. volume: 5.3 gal\u003c\/li\u003e \u003cli\u003e Volume, cone: 3.1 gal\u003c\/li\u003e \u003cli\u003e Material: 1.5mm stainless steel (SS304)\u003c\/li\u003e \u003cli\u003e Operating pressure: 1.0 bar \/ 15 PSI\u003c\/li\u003e \u003cli\u003e Max pressure: 2.0 bar \/ 30 PSI\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e \u003cstrong\u003eIn the box:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e Unitank with adjustable frame\u003c\/li\u003e \u003cli\u003e 1 pcs Analog pressure gauge, TC34mm\u003c\/li\u003e \u003cli\u003e 2 pcs Butterfly-valve, 2\"\u003c\/li\u003e \u003cli\u003e 1 pcs Butterfly-valve, 34mm DN20\u003c\/li\u003e \u003cli\u003e 1 pcs Blow-off pipe\u003c\/li\u003e \u003cli\u003e 1 pcs Racking arm 2\"\u003c\/li\u003e \u003cli\u003e 1 pcs TC elbow 90°, 2\"\u003c\/li\u003e \u003cli\u003e 1 pcs Insulation jacket, black neoprene\u003c\/li\u003e \u003cli\u003e 1 pcs Sample valve, 34mm\u003c\/li\u003e \u003cli\u003e 1 pcs TC Adapter 8\"-3\"\u003c\/li\u003e \u003cli\u003e 1 pcs TC blind cap, 3\"\u003c\/li\u003e \u003cli\u003e 1 pcs TC blind cap 2\"\u003c\/li\u003e \u003cli\u003e 2 pcs TC blind cap 1.5\"\u003c\/li\u003e \u003cli\u003e 3 pcs TC blind cap 34mm\u003c\/li\u003e \u003cli\u003e 2 pcs TC gasket 8\" lipped\u003c\/li\u003e \u003cli\u003e 2 pcs TC gasket 3\"\u003c\/li\u003e \u003cli\u003e 2 pcs TC gasket 2\" 5-pack\u003c\/li\u003e \u003cli\u003e 1 pcs TC gasket 1.5\" 5-pack\u003c\/li\u003e \u003cli\u003e 3 pcs TC gasket 34mm 5-pack (DN20)\u003c\/li\u003e \u003cli\u003e 1 pcs Tri Clamp 8\"\u003c\/li\u003e \u003cli\u003e 1 pcs Tri Clamp 3\"\u003c\/li\u003e \u003cli\u003e 5 pcs Tri Clamp 2\"\u003c\/li\u003e \u003cli\u003e 2 pcs Tri Clamp 1.5\"\u003c\/li\u003e \u003cli\u003e 10 pcs Tri Clamp 34mm\u003c\/li\u003e \u003cli\u003e 1 pcs TC tool\u003c\/li\u003e \u003cli\u003e 4 pcs M10 steel\/rubber feet\u003c\/li\u003e \u003cli\u003e 1 pcs TC34mm safety valve (PRV, 2 bar)\u003c\/li\u003e \u003cli\u003e Necessary bolts and parts for assembly\u003c\/li\u003e \u003cli\u003e \u003cstrong\u003e5 year manufacturer's warranty\u003c\/strong\u003e\n\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e Recommended accessories include: HopDrop-kit, Thermowells for your sensors, 34mm Ball-Lock gas adapter for CO2 filling, Coil for sample valve, Spunding valve, Hose barbs for filling and dumping, etc.\u003c\/p\u003e \u003cp\u003e \u003cstrong\u003eFor User Manuals and support, please follow this link to \u003ca href=\"https:\/\/docs.brewtools.com\/user-manuals\/fermentation\/unitank\" target=\"_blank\"\u003eBrewtools Docs\u003c\/a\u003e.\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e \u003cem\u003eNOTE: Model in photo is a prototype. Minor changes and improvements may occur.\u003c\/em\u003e\u003c\/p\u003e \u003cdiv class=\"iframe-container\"\u003e \u003ciframe allowfullscreen=\"\" frameborder=\"0\" src=\"https:\/\/www.youtube.com\/embed\/-N25PQ8EHUg?modestbranding=1\u0026amp;rel=0\"\u003e\u003c\/iframe\u003e\n\u003c\/div\u003e \u003cstyle type=\"text\/css\"\u003e .iframe-container{ position: relative; width: 100%; max-height: 65vh; padding-bottom: 56.25%; height: 0; } .iframe-container iframe{ position: absolute; top:0; left: 0; width: 100%; height: 100%; } @media screen and (min-width: 992px) { .iframe-container{ transform: scale(0.8); } }\u003c\/style\u003e","brand":"BrewTools","offers":[{"title":"Default Title","offer_id":51917300105505,"sku":"BT1008","price":2467.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/7521\/2321\/files\/49602.jpg?v=1760465931"},{"product_id":"brewtools-f150-unitank-40140l105369g-capacity","title":"Brewtools | F150 Unitank | 40-140L\/10.5-36.9G Capacity","description":"\u003cul\u003e \u003cli\u003e Ferment, cold crash, and carbonate beer all in one vessel with the Brewtools F-Series Unitank\u003c\/li\u003e \u003cli\u003e Cooling jacket welded to the vertical walls of the tank provide superior cooling capabilities compared to in-solution cooling coils\u003c\/li\u003e \u003cli\u003e Made from stainless steel throughout with Brewtools' proprietary PureBlast™ surface—no passivation required, simply rinse with warm water before your first use\u003c\/li\u003e \u003cli\u003e Pressure rated to 30 PSI so you can safely ferment under pressure and pressure transfer finished beer to kegs with virtually no oxygen pickup\u003c\/li\u003e \u003cli\u003e Brewtools is a Norwegian brand known for high-quality products made without compromise. From brewing systems to fermenters, they continue to push the envelope of innovation for homebrewers around the globe\u003c\/li\u003e \u003cli\u003e All valves, fittings, and gaskets come included\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e Brewtools Unitanks are fermenters made for ambitious homebrewers and small breweries. As part of the Brewtools identity, they've explored new techniques and solutions. This has resulted in a series of high end fermentation tanks with new features and a lot of possibilities.\u003c\/p\u003e \u003cp\u003e \u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e Brewtools PureBlast™ surface inside and out which eliminate the use of wax and polishing compounds and does not require passivation.\u003c\/li\u003e \u003cli\u003e Cooling jacket in the vertical walls offers efficient cooling without the hassle of cleaning a spiral.\u003c\/li\u003e \u003cli\u003e Many options for connecting accessories like sensors, heaters, carb. stones and other accessories.\u003c\/li\u003e \u003cli\u003e Pressure rated for 2 bar \/ 30 PSI\u003c\/li\u003e \u003cli\u003e \u003cdiv\u003e Cooling jacket pressure rated for 0.5 bar \/ 7 PSI\u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e 8\" TC port on top for easy access.\u003c\/li\u003e \u003cli\u003e 2\" TC dump and racking valves.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e BrewTools Unitanks are designed and manufactured with special attention to safety and quality. They are tested and certified according to the requirements for PED 2014\/68\/EU by a third party.\u003c\/p\u003e \u003cp\u003e \u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e Low height w\/o acc.: 50\"\u003c\/li\u003e \u003cli\u003e Max height w\/o acc.: 57.9\"\u003c\/li\u003e \u003cli\u003e Packaging size: 51.2\" (h) x 23.6\" (w) x 23.6\" (d)\u003c\/li\u003e \u003cli\u003e Net weight: 123.5 lbs\u003c\/li\u003e \u003cli\u003e Gross weight: 136.5 lbs\u003c\/li\u003e \u003cli\u003e Tank diameter (inside): Ø19.7\"\u003c\/li\u003e \u003cli\u003e Gross volume: 41.7 gal\u003c\/li\u003e \u003cli\u003e Max rec. volume: 40 gal\u003c\/li\u003e \u003cli\u003e Min rec. volume: 10.5 gal\u003c\/li\u003e \u003cli\u003e Volume, cone: 6.3 gal\u003c\/li\u003e \u003cli\u003e Material: 1.5mm stainless steel (SS304)\u003c\/li\u003e \u003cli\u003e Operating pressure: 1.0 bar \/ 15 PSI\u003c\/li\u003e \u003cli\u003e Max pressure: 2.0 bar \/ 30 PSI\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e \u003cstrong\u003eIn the box:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e Unitank with adjustable frame\u003c\/li\u003e \u003cli\u003e 1 pcs Analog pressure gauge, TC34mm\u003c\/li\u003e \u003cli\u003e 2 pcs Butterfly-valve, 2\"\u003c\/li\u003e \u003cli\u003e 1 pcs Butterfly-valve, 34mm DN20\u003c\/li\u003e \u003cli\u003e 1 pcs Blow-off pipe\u003c\/li\u003e \u003cli\u003e 1 pcs Racking arm 2\"\u003c\/li\u003e \u003cli\u003e 1 pcs TC elbow 90°, 2\"\u003c\/li\u003e \u003cli\u003e 1 pcs Insulation jacket, black neoprene\u003c\/li\u003e \u003cli\u003e 1 pcs Sample valve, 34mm\u003c\/li\u003e \u003cli\u003e 1 pcs TC Adapter 8\"-4\"\u003c\/li\u003e \u003cli\u003e 1 pcs TC blind cap, 4\"\u003c\/li\u003e \u003cli\u003e 1 pcs TC blind cap 2\"\u003c\/li\u003e \u003cli\u003e 2 pcs TC blind cap 1.5\"\u003c\/li\u003e \u003cli\u003e 3 pcs TC blind cap 34mm\u003c\/li\u003e \u003cli\u003e 2 pcs TC gasket 8\" lipped\u003c\/li\u003e \u003cli\u003e 2 pcs TC gasket 4\"\u003c\/li\u003e \u003cli\u003e 2 pcs TC gasket 2\" 5-pack\u003c\/li\u003e \u003cli\u003e 1 pcs TC gasket 1.5\" 5-pack\u003c\/li\u003e \u003cli\u003e 3 pcs TC gasket 34mm 5-pack (DN20)\u003c\/li\u003e \u003cli\u003e 1 pcs Tri Clamp 8\"\u003c\/li\u003e \u003cli\u003e 1 pcs Tri Clamp 4\"\u003c\/li\u003e \u003cli\u003e 5 pcs Tri Clamp 2\"\u003c\/li\u003e \u003cli\u003e 2 pcs Tri Clamp 1.5\"\u003c\/li\u003e \u003cli\u003e 10 pcs Tri Clamp 34mm\u003c\/li\u003e \u003cli\u003e 1 pcs TC tool\u003c\/li\u003e \u003cli\u003e 4 pcs M10 steel\/rubber feet\u003c\/li\u003e \u003cli\u003e 1 pcs TC34mm safety valve (PRV, 2 bar)\u003c\/li\u003e \u003cli\u003e Necessary bolts and parts for assembly\u003c\/li\u003e \u003cli\u003e \u003cstrong\u003e5 year manufacturer's warranty\u003c\/strong\u003e\n\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e Recommended accessories include: HopDrop-kit, Thermowells for your sensors, 34mm Ball-Lock gas adapter for CO2 filling, Coil for sample valve, Spunding valve, Hose barbs for filling and dumping, etc.\u003c\/p\u003e \u003cp\u003e \u003cstrong\u003eFor User Manuals and support, please follow this link to \u003ca href=\"https:\/\/docs.brewtools.com\/user-manuals\/fermentation\/unitank\" target=\"_blank\"\u003eBrewtools Docs\u003c\/a\u003e.\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e \u003cem\u003eNOTE: Model in photo is a prototype. Minor changes and improvements may occur.\u003c\/em\u003e\u003c\/p\u003e \u003cdiv class=\"iframe-container\"\u003e \u003ciframe allowfullscreen=\"\" frameborder=\"0\" src=\"https:\/\/www.youtube.com\/embed\/-N25PQ8EHUg?modestbranding=1\u0026amp;rel=0\"\u003e\u003c\/iframe\u003e\n\u003c\/div\u003e \u003cstyle type=\"text\/css\"\u003e .iframe-container{ position: relative; width: 100%; max-height: 65vh; padding-bottom: 56.25%; height: 0; } .iframe-container iframe{ position: absolute; top:0; left: 0; width: 100%; height: 100%; } @media screen and (min-width: 992px) { .iframe-container{ transform: scale(0.8); } }\u003c\/style\u003e","brand":"BrewTools","offers":[{"title":"Default Title","offer_id":51917300138273,"sku":"BT1009","price":3084.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/7521\/2321\/files\/49609.jpg?v=1760465934"},{"product_id":"brewtools-miniunitrade-10-10l-26g","title":"Brewtools MiniUni™ 10 | 10L | 2.6G","description":"\u003cul\u003e\r\n\t\u003cli\u003e\r\n\t\tThe Brewtools MiniUni™ series fermenters are high-quality, affordable and flexible tanks for fermentation, storage and serving beer\u003c\/li\u003e\r\n\t\u003cli\u003e\r\n\t\tMade from stainless steel throughout with Brewtools' proprietary PureBlast™ surface—no passivation required, simply rinse with warm water before your first use\u003c\/li\u003e\r\n\t\u003cli\u003e\r\n\t\tPressure rated to 30 PSI so you can safely ferment under pressure and pressure transfer finished beer to kegs with virtually no oxygen pickup\u003c\/li\u003e\r\n\t\u003cli\u003e\r\n\t\tBrewtools is a Norwegian brand known for high-quality products made without compromise. From brewing systems to fermenters, they continue to push the envelope of innovation for homebrewers around the globe\u003c\/li\u003e\r\n\t\u003cli\u003e\r\n\t\tAll valves, fittings, and gaskets come included\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\r\n\tThe MiniUni™ is a series of high-quality, affordable and flexible tanks for fermentation, storage and serving beer and endless other applications like water heating, cleaning liquid storage, HERMS setups, etc. They can be kept in the included base, or installed on the wall with the included wall bracket. With the optional pressure kit, you can utilize the 2 bar (30 PSI) pressure rating for fermentation and carbonation.\u003c\/p\u003e\r\n\u003cp\u003e\r\n\tUse them to build your setup, they will last a lifetime! And as always, Brewtools appreciates any feedback or requests for accessories.\u003c\/p\u003e\r\n\u003cp\u003e\r\n\t\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\t\u003cli\u003e\r\n\t\tPureBlast™ surface inside and out which eliminates the use of wax and polishing compounds and does not require passivation\u003c\/li\u003e\r\n\t\u003cli\u003e\r\n\t\tEasy cleaning with a 4\" T.C. top port and 2\" T.C. bottom port\u003c\/li\u003e\r\n\t\u003cli\u003e\r\n\t\tPressure rated for 2 bar \/ 30 PSI.\u003c\/li\u003e\r\n\t\u003cli\u003e\r\n\t\tWall bracket included\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\r\n\tIf you want to raise the MiniUni base and make room for an elbow with a butterfly valve or other accessories, check out the MiniUni™ Leg Kit.\u003c\/p\u003e\r\n\u003cp\u003e\r\n\tMiniUni tanks are designed and manufactured with special attention to safety and quality. They are tested and certified according to the requirements for PED 2014\/68\/EU by a third party.\u003c\/p\u003e\r\n\u003cp\u003e\r\n\t\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\t\u003cli\u003e\r\n\t\t\u003cdiv\u003e\r\n\t\t\tPackaging size: 13.3\" (w) x 13.3\" (d) x 16.9\" (h)\u003c\/div\u003e\r\n\t\u003c\/li\u003e\r\n\t\u003cli\u003e\r\n\t\t\u003cdiv\u003e\r\n\t\t\tNet weight: 13.4 lbs\u003c\/div\u003e\r\n\t\u003c\/li\u003e\r\n\t\u003cli\u003e\r\n\t\t\u003cdiv\u003e\r\n\t\t\tGross weight: 15.9 lbs\u003c\/div\u003e\r\n\t\u003c\/li\u003e\r\n\t\u003cli\u003e\r\n\t\t\u003cdiv\u003e\r\n\t\t\tTank diameter (inside): Ø11\"\u003c\/div\u003e\r\n\t\u003c\/li\u003e\r\n\t\u003cli\u003e\r\n\t\tMax volume: 2.6 gal\u003c\/li\u003e\r\n\t\u003cli\u003e\r\n\t\tCone volume: 0.4 gal\u003c\/li\u003e\r\n\t\u003cli\u003e\r\n\t\tMaterial: 1.5mm stainless steel (SS304)\u003c\/li\u003e\r\n\t\u003cli\u003e\r\n\t\tOperating pressure: 1.0 bar \/ 15 PSI\u003c\/li\u003e\r\n\t\u003cli\u003e\r\n\t\tMax pressure: 2 bar \/ 30 PSI\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\r\n\t\u003cstrong\u003eIn the Box:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\t\u003cli\u003e\r\n\t\tMiniUni™ Tank\u003c\/li\u003e\r\n\t\u003cli\u003e\r\n\t\tBase with silicone gasket\u003c\/li\u003e\r\n\t\u003cli\u003e\r\n\t\tWall bracket and wall support\u003c\/li\u003e\r\n\t\u003cli\u003e\r\n\t\tWall bracket safety pin\u003c\/li\u003e\r\n\t\u003cli\u003e\r\n\t\tComposite T.C. adapter 4\" to 34mm\u003c\/li\u003e\r\n\t\u003cli\u003e\r\n\t\tAirlock, 3-piece with holder\u003c\/li\u003e\r\n\t\u003cli\u003e\r\n\t\t4\" tri-clamp\u003c\/li\u003e\r\n\t\u003cli\u003e\r\n\t\t2\" tri-clamp\u003c\/li\u003e\r\n\t\u003cli\u003e\r\n\t\t2\" T.C. blind cap\u003c\/li\u003e\r\n\t\u003cli\u003e\r\n\t\tT.C. gaskets\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\r\n\t\u003cstrong\u003eFor User Manuals and support, please follow this link to \u003ca href=\"https:\/\/docs.brewtools.com\/user-manuals\/fermentation\/miniuni-tm\" target=\"_blank\"\u003eBrewtools Docs\u003c\/a\u003e.\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\r\n\t \u003c\/p\u003e\r\n\u003cdiv class=\"iframe-container\"\u003e\r\n\t\u003ciframe allowfullscreen=\"\" frameborder=\"0\" src=\"https:\/\/www.youtube.com\/embed\/qYIpWSYjDNM?modestbranding=1\u0026amp;rel=0\"\u003e\u003c\/iframe\u003e\n\u003c\/div\u003e\r\n\u003cstyle type=\"text\/css\"\u003e\n.iframe-container{ position: relative; width: 100%; max-height: 65vh; padding-bottom: 56.25%; height: 0; } .iframe-container iframe{ position: absolute; top:0; left: 0; width: 100%; height: 100%; } @media screen and (min-width: 992px) { .iframe-container{ transform: scale(0.8); } }\u003c\/style\u003e\r\n\u003cp\u003e\r\n\t \u003c\/p\u003e\r\n\u003cdiv class=\"iframe-container\"\u003e\r\n\t\u003ciframe allowfullscreen=\"\" frameborder=\"0\" src=\"https:\/\/www.youtube.com\/embed\/YAJVj26A6nA?modestbranding=1\u0026amp;rel=0\"\u003e\u003c\/iframe\u003e\n\u003c\/div\u003e\r\n\u003cstyle type=\"text\/css\"\u003e\n.iframe-container{ position: relative; width: 100%; max-height: 65vh; padding-bottom: 56.25%; height: 0; } .iframe-container iframe{ position: absolute; top:0; left: 0; width: 100%; height: 100%; } @media screen and (min-width: 992px) { .iframe-container{ transform: scale(0.8); } }\u003c\/style\u003e\r\n","brand":"BrewTools","offers":[{"title":"Default Title","offer_id":51917423673633,"sku":"BT1101","price":332.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/7521\/2321\/files\/53233.jpg?v=1760472973"},{"product_id":"brewtools-miniuni-20-20l-52g","title":"Brewtools MiniUni™ 20 | 20L | 5.2G","description":"\u003cul\u003e \u003cli\u003e The Brewtools MiniUni™ series fermenters are high-quality, affordable and flexible tanks for fermentation, storage and serving beer\u003c\/li\u003e \u003cli\u003e Made from stainless steel throughout with Brewtools' proprietary PureBlast™ surface—no passivation required, simply rinse with warm water before your first use\u003c\/li\u003e \u003cli\u003e Pressure rated to 30 PSI so you can safely ferment under pressure and pressure transfer finished beer to kegs with virtually no oxygen pickup\u003c\/li\u003e \u003cli\u003e Brewtools is a Norwegian brand known for high-quality products made without compromise. From brewing systems to fermenters, they continue to push the envelope of innovation for homebrewers around the globe\u003c\/li\u003e \u003cli\u003e All valves, fittings, and gaskets come included\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e The MiniUni™ is a series of high-quality, affordable and flexible tanks for fermentation, storage and serving beer and endless other applications like water heating, cleaning liquid storage, HERMS setups, etc. They can be kept in the included base, or installed on the wall with the included wall bracket. With the optional pressure kit, you can utilize the 2 bar (30 PSI) pressure rating for fermentation and carbonation.\u003c\/p\u003e \u003cp\u003e Use them to build your setup, they will last a lifetime! And as always, Brewtools appreciates any feedback or requests for accessories.\u003c\/p\u003e \u003cp\u003e \u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e PureBlast™ surface inside and out which eliminates the use of wax and polishing compounds and does not require passivation\u003c\/li\u003e \u003cli\u003e Easy cleaning with a 4\" T.C. top port and 2\" T.C. bottom port\u003c\/li\u003e \u003cli\u003e Pressure rated for 2 bar \/ 30 PSI.\u003c\/li\u003e \u003cli\u003e Wall bracket included\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e If you want to raise the MiniUni base and make room for an elbow with a butterfly valve or other accessories, check out the MiniUni™ Leg Kit.\u003c\/p\u003e \u003cdiv\u003e MiniUni tanks are designed and manufactured with special attention to safety and quality. They are tested and certified according to the requirements for PED 2014\/68\/EU by a third party.\u003c\/div\u003e \u003cp\u003e \u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e Packaging size: 13.3\" (w) x 13.3\" (d) x 24\" (h) \u003c\/li\u003e \u003cli\u003e Net weight: 17.6 lbs\u003c\/li\u003e \u003cli\u003e Gross weight: 20.5 lbs\u003c\/li\u003e \u003cli\u003e Tank diameter (inside): Ø11\"\u003c\/li\u003e \u003cli\u003e Max volume: 5.2 gal\u003c\/li\u003e \u003cli\u003e Cone volume: 0.4 gal\u003c\/li\u003e \u003cli\u003e Material: 1.5mm stainless steel (SS304)\u003c\/li\u003e \u003cli\u003e Operating pressure: 1.0 bar \/ 15 PSI\u003c\/li\u003e \u003cli\u003e Max pressure: 2 bar \/ 30 PSI\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e \u003cstrong\u003eIn the Box:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e MiniUni™ Tank\u003c\/li\u003e \u003cli\u003e Base with silicone gasket\u003c\/li\u003e \u003cli\u003e Wall bracket and wall support\u003c\/li\u003e \u003cli\u003e Wall bracket safety pin\u003c\/li\u003e \u003cli\u003e Composite T.C. adapter 4\" to 34mm\u003c\/li\u003e \u003cli\u003e Airlock, 3-piece with holder\u003c\/li\u003e \u003cli\u003e 4\" tri-clamp\u003c\/li\u003e \u003cli\u003e 2\" tri-clamp\u003c\/li\u003e \u003cli\u003e 2\" T.C. blind cap\u003c\/li\u003e \u003cli\u003e T.C. gaskets\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e \u003cstrong\u003eFor User Manuals and support, please follow this link to \u003ca href=\"https:\/\/docs.brewtools.com\/user-manuals\/fermentation\/miniuni-tm\" target=\"_blank\"\u003eBrewtools Docs\u003c\/a\u003e.\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e \u003c\/p\u003e \u003cdiv class=\"iframe-container\"\u003e \u003ciframe allowfullscreen=\"\" frameborder=\"0\" src=\"https:\/\/www.youtube.com\/embed\/qYIpWSYjDNM?modestbranding=1\u0026amp;rel=0\"\u003e\u003c\/iframe\u003e\n\u003c\/div\u003e \u003cstyle type=\"text\/css\"\u003e .iframe-container{ position: relative; width: 100%; max-height: 65vh; padding-bottom: 56.25%; height: 0; } .iframe-container iframe{ position: absolute; top:0; left: 0; width: 100%; height: 100%; } @media screen and (min-width: 992px) { .iframe-container{ transform: scale(0.8); } }\u003c\/style\u003e \u003cp\u003e \u003c\/p\u003e \u003cdiv class=\"iframe-container\"\u003e \u003ciframe allowfullscreen=\"\" frameborder=\"0\" src=\"https:\/\/www.youtube.com\/embed\/YAJVj26A6nA?modestbranding=1\u0026amp;rel=0\"\u003e\u003c\/iframe\u003e\n\u003c\/div\u003e \u003cstyle type=\"text\/css\"\u003e .iframe-container{ position: relative; width: 100%; max-height: 65vh; padding-bottom: 56.25%; height: 0; } .iframe-container iframe{ position: absolute; top:0; left: 0; width: 100%; height: 100%; } @media screen and (min-width: 992px) { .iframe-container{ transform: scale(0.8); } }\u003c\/style\u003e","brand":"BrewTools","offers":[{"title":"Default Title","offer_id":51917423771937,"sku":"BT1102","price":394.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/7521\/2321\/files\/53234.jpg?v=1760472975"},{"product_id":"brewtools-miniunitrade-30-30l-79g","title":"Brewtools MiniUni™ 30 | 30L | 7.9G","description":"\u003cul\u003e \u003cli\u003e The Brewtools MiniUni™ series fermenters are high-quality, affordable and flexible tanks for fermentation, storage and serving beer\u003c\/li\u003e \u003cli\u003e Made from stainless steel throughout with Brewtools' proprietary PureBlast™ surface—no passivation required, simply rinse with warm water before your first use\u003c\/li\u003e \u003cli\u003e Pressure rated to 30 PSI so you can safely ferment under pressure and pressure transfer finished beer to kegs with virtually no oxygen pickup\u003c\/li\u003e \u003cli\u003e Brewtools is a Norwegian brand known for high-quality products made without compromise. From brewing systems to fermenters, they continue to push the envelope of innovation for homebrewers around the globe\u003c\/li\u003e \u003cli\u003e All valves, fittings, and gaskets come included\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e The MiniUni™ is a series of high-quality, affordable and flexible tanks for fermentation, storage and serving beer and endless other applications like water heating, cleaning liquid storage, HERMS setups, etc. They can be kept in the included base, or installed on the wall with the included wall bracket. With the optional pressure kit, you can utilize the 2 bar (30 PSI) pressure rating for fermentation and carbonation.\u003c\/p\u003e \u003cp\u003e Use them to build your setup, they will last a lifetime! And as always, Brewtools appreciates any feedback or requests for accessories.\u003c\/p\u003e \u003cp\u003e \u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e PureBlast™ surface inside and out which eliminates the use of wax and polishing compounds and does not require passivation\u003c\/li\u003e \u003cli\u003e Easy cleaning with a 4\" T.C. top port and 2\" T.C. bottom port\u003c\/li\u003e \u003cli\u003e Pressure rated for 2 bar \/ 30 PSI.\u003c\/li\u003e \u003cli\u003e Wall bracket included\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e If you want to raise the MiniUni base and make room for an elbow with a butterfly valve or other accessories, check out the MiniUni™ Leg Kit.\u003c\/p\u003e \u003cdiv\u003e MiniUni tanks are designed and manufactured with special attention to safety and quality. They are tested and certified according to the requirements for PED 2014\/68\/EU by a third party.\u003c\/div\u003e \u003cp\u003e \u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e Packaging size: 13.3\" (w) x 13.3\" (d) x 30.3\" (h) \u003c\/li\u003e \u003cli\u003e Net weight: 21.2 lbs\u003c\/li\u003e \u003cli\u003e Gross weight: 24.6 lbs\u003c\/li\u003e \u003cli\u003e Tank diameter (inside): Ø11\"\u003c\/li\u003e \u003cli\u003e Max volume: 7.9 gal\u003c\/li\u003e \u003cli\u003e Cone volume: 0.4 gal\u003c\/li\u003e \u003cli\u003e Material: 1.5mm stainless steel (SS304)\u003c\/li\u003e \u003cli\u003e Operating pressure: 1.0 bar \/ 15 PSI\u003c\/li\u003e \u003cli\u003e Max pressure: 2 bar \/ 30 PSI\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e \u003cstrong\u003eIn the Box:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e MiniUni™ Tank\u003c\/li\u003e \u003cli\u003e Base with silicone gasket\u003c\/li\u003e \u003cli\u003e Wall bracket and wall support\u003c\/li\u003e \u003cli\u003e Wall bracket safety pin\u003c\/li\u003e \u003cli\u003e Composite T.C. adapter 4\" to 34mm\u003c\/li\u003e \u003cli\u003e Airlock, 3-piece with holder\u003c\/li\u003e \u003cli\u003e 4\" tri-clamp\u003c\/li\u003e \u003cli\u003e 2\" tri-clamp\u003c\/li\u003e \u003cli\u003e 2\" T.C. blind cap\u003c\/li\u003e \u003cli\u003e T.C. gaskets\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e \u003cstrong\u003eFor User Manuals and support, please follow this link to \u003ca href=\"https:\/\/docs.brewtools.com\/user-manuals\/fermentation\/miniuni-tm\" target=\"_blank\"\u003eBrewtools Docs\u003c\/a\u003e.\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e \u003c\/p\u003e \u003cdiv class=\"iframe-container\"\u003e \u003ciframe allowfullscreen=\"\" frameborder=\"0\" src=\"https:\/\/www.youtube.com\/embed\/qYIpWSYjDNM?modestbranding=1\u0026amp;rel=0\"\u003e\u003c\/iframe\u003e\n\u003c\/div\u003e \u003cstyle type=\"text\/css\"\u003e .iframe-container{ position: relative; width: 100%; max-height: 65vh; padding-bottom: 56.25%; height: 0; } .iframe-container iframe{ position: absolute; top:0; left: 0; width: 100%; height: 100%; } @media screen and (min-width: 992px) { .iframe-container{ transform: scale(0.8); } }\u003c\/style\u003e \u003cp\u003e \u003c\/p\u003e \u003cdiv class=\"iframe-container\"\u003e \u003ciframe allowfullscreen=\"\" frameborder=\"0\" src=\"https:\/\/www.youtube.com\/embed\/YAJVj26A6nA?modestbranding=1\u0026amp;rel=0\"\u003e\u003c\/iframe\u003e\n\u003c\/div\u003e \u003cstyle type=\"text\/css\"\u003e .iframe-container{ position: relative; width: 100%; max-height: 65vh; padding-bottom: 56.25%; height: 0; } .iframe-container iframe{ position: absolute; top:0; left: 0; width: 100%; height: 100%; } @media screen and (min-width: 992px) { .iframe-container{ transform: scale(0.8); } }\u003c\/style\u003e","brand":"BrewTools","offers":[{"title":"Default Title","offer_id":51917423903009,"sku":"BT1103","price":431.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/7521\/2321\/files\/53235.jpg?v=1760472977"},{"product_id":"brewtools-miniunitrade-40-40l-105g","title":"Brewtools MiniUni™ 40 | 40L | 10.5G","description":"\u003cul\u003e \u003cli\u003e The Brewtools MiniUni™ series fermenters are high-quality, affordable and flexible tanks for fermentation, storage and serving beer\u003c\/li\u003e \u003cli\u003e Made from stainless steel throughout with Brewtools' proprietary PureBlast™ surface—no passivation required, simply rinse with warm water before your first use\u003c\/li\u003e \u003cli\u003e Pressure rated to 30 PSI so you can safely ferment under pressure and pressure transfer finished beer to kegs with virtually no oxygen pickup\u003c\/li\u003e \u003cli\u003e Brewtools is a Norwegian brand known for high-quality products made without compromise. From brewing systems to fermenters, they continue to push the envelope of innovation for homebrewers around the globe\u003c\/li\u003e \u003cli\u003e All valves, fittings, and gaskets come included\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e The MiniUni™ is a series of high-quality, affordable and flexible tanks for fermentation, storage and serving beer and endless other applications like water heating, cleaning liquid storage, HERMS setups, etc. They can be kept in the included base, or installed on the wall with the included wall bracket. With the optional pressure kit, you can utilize the 2 bar (30 PSI) pressure rating for fermentation and carbonation.\u003c\/p\u003e \u003cp\u003e Use them to build your setup, they will last a lifetime! And as always, Brewtools appreciates any feedback or requests for accessories.\u003c\/p\u003e \u003cp\u003e \u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e PureBlast™ surface inside and out which eliminates the use of wax and polishing compounds and does not require passivation\u003c\/li\u003e \u003cli\u003e Easy cleaning with a 4\" T.C. top port and 2\" T.C. bottom port\u003c\/li\u003e \u003cli\u003e Pressure rated for 2 bar \/ 30 PSI.\u003c\/li\u003e \u003cli\u003e Wall bracket included\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e If you want to raise the MiniUni base and make room for an elbow with a butterfly valve or other accessories, check out the MiniUni™ Leg Kit.\u003c\/p\u003e \u003cdiv\u003e MiniUni tanks are designed and manufactured with special attention to safety and quality. They are tested and certified according to the requirements for PED 2014\/68\/EU by a third party.\u003c\/div\u003e \u003cp\u003e \u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e Packaging size: 13.3\" (w) x 13.3\" (d) x 36.6\" (h) \u003c\/li\u003e \u003cli\u003e Net weight: 24.6 lbs\u003c\/li\u003e \u003cli\u003e Gross weight: 28.6 lbs\u003c\/li\u003e \u003cli\u003e Tank diameter (inside): Ø11\"\u003c\/li\u003e \u003cli\u003e Max volume: 10.5 gal\u003c\/li\u003e \u003cli\u003e Cone volume: 0.4 gal\u003c\/li\u003e \u003cli\u003e Material: 1.5mm stainless steel (SS304)\u003c\/li\u003e \u003cli\u003e Operating pressure: 1.0 bar \/ 15 PSI\u003c\/li\u003e \u003cli\u003e Max pressure: 2 bar \/ 30 PSI\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e \u003cstrong\u003eIn the Box:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e MiniUni™ Tank\u003c\/li\u003e \u003cli\u003e Base with silicone gasket\u003c\/li\u003e \u003cli\u003e Wall bracket and wall support\u003c\/li\u003e \u003cli\u003e Wall bracket safety pin\u003c\/li\u003e \u003cli\u003e Composite T.C. adapter 4\" to 34mm\u003c\/li\u003e \u003cli\u003e Airlock, 3-piece with holder\u003c\/li\u003e \u003cli\u003e 4\" tri-clamp\u003c\/li\u003e \u003cli\u003e 2\" tri-clamp\u003c\/li\u003e \u003cli\u003e 2\" T.C. blind cap\u003c\/li\u003e \u003cli\u003e T.C. gaskets\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e \u003cstrong\u003eFor User Manuals and support, please follow this link to \u003ca href=\"https:\/\/docs.brewtools.com\/user-manuals\/fermentation\/miniuni-tm\" target=\"_blank\"\u003eBrewtools Docs\u003c\/a\u003e.\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e \u003c\/p\u003e \u003cdiv class=\"iframe-container\"\u003e \u003ciframe allowfullscreen=\"\" frameborder=\"0\" src=\"https:\/\/www.youtube.com\/embed\/qYIpWSYjDNM?modestbranding=1\u0026amp;rel=0\"\u003e\u003c\/iframe\u003e\n\u003c\/div\u003e \u003cstyle type=\"text\/css\"\u003e .iframe-container{ position: relative; width: 100%; max-height: 65vh; padding-bottom: 56.25%; height: 0; } .iframe-container iframe{ position: absolute; top:0; left: 0; width: 100%; height: 100%; } @media screen and (min-width: 992px) { .iframe-container{ transform: scale(0.8); } }\u003c\/style\u003e \u003cp\u003e \u003c\/p\u003e \u003cdiv class=\"iframe-container\"\u003e \u003ciframe allowfullscreen=\"\" frameborder=\"0\" src=\"https:\/\/www.youtube.com\/embed\/YAJVj26A6nA?modestbranding=1\u0026amp;rel=0\"\u003e\u003c\/iframe\u003e\n\u003c\/div\u003e \u003cstyle type=\"text\/css\"\u003e .iframe-container{ position: relative; width: 100%; max-height: 65vh; padding-bottom: 56.25%; height: 0; } .iframe-container iframe{ position: absolute; top:0; left: 0; width: 100%; height: 100%; } @media screen and (min-width: 992px) { .iframe-container{ transform: scale(0.8); } }\u003c\/style\u003e","brand":"BrewTools","offers":[{"title":"Default Title","offer_id":51917424099617,"sku":"BT1104","price":493.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/7521\/2321\/files\/53236.jpg?v=1760472980"},{"product_id":"brewtools-miniunitrade-50-50l-132g","title":"Brewtools MiniUni™ 50 | 50L | 13.2G","description":"\u003cul\u003e \u003cli\u003e The Brewtools MiniUni™ series fermenters are high-quality, affordable and flexible tanks for fermentation, storage and serving beer\u003c\/li\u003e \u003cli\u003e Made from stainless steel throughout with Brewtools' proprietary PureBlast™ surface—no passivation required, simply rinse with warm water before your first use\u003c\/li\u003e \u003cli\u003e Pressure rated to 30 PSI so you can safely ferment under pressure and pressure transfer finished beer to kegs with virtually no oxygen pickup\u003c\/li\u003e \u003cli\u003e Brewtools is a Norwegian brand known for high-quality products made without compromise. From brewing systems to fermenters, they continue to push the envelope of innovation for homebrewers around the globe\u003c\/li\u003e \u003cli\u003e All valves, fittings, and gaskets come included\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e The MiniUni™ is a series of high-quality, affordable and flexible tanks for fermentation, storage and serving beer and endless other applications like water heating, cleaning liquid storage, HERMS setups, etc. They can be kept in the included base, or installed on the wall with the included wall bracket. With the optional pressure kit, you can utilize the 2 bar (30 PSI) pressure rating for fermentation and carbonation.\u003c\/p\u003e \u003cp\u003e Use them to build your setup, they will last a lifetime! And as always, Brewtools appreciates any feedback or requests for accessories.\u003c\/p\u003e \u003cp\u003e \u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e PureBlast™ surface inside and out which eliminates the use of wax and polishing compounds and does not require passivation\u003c\/li\u003e \u003cli\u003e Easy cleaning with a 4\" T.C. top port and 2\" T.C. bottom port\u003c\/li\u003e \u003cli\u003e Pressure rated for 2 bar \/ 30 PSI.\u003c\/li\u003e \u003cli\u003e Wall bracket included\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e If you want to raise the MiniUni base and make room for an elbow with a butterfly valve or other accessories, check out the MiniUni™ Leg Kit.\u003c\/p\u003e \u003cp\u003e MiniUni tanks are designed and manufactured with special attention to safety and quality. They are tested and certified according to the requirements for PED 2014\/68\/EU by a third party.\u003c\/p\u003e \u003cp\u003e \u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e Packaging size: 13.3\" (w) x 13.3\" (d) x 42.7\" (h) \u003c\/li\u003e \u003cli\u003e Net weight: 28.3 lbs\u003c\/li\u003e \u003cli\u003e Gross weight: 32.6 lbs\u003c\/li\u003e \u003cli\u003e Tank diameter (inside): Ø11\"\u003c\/li\u003e \u003cli\u003e Max volume: 13.2 gal\u003c\/li\u003e \u003cli\u003e Cone volume: 0.4 gal\u003c\/li\u003e \u003cli\u003e Material: 1.5mm stainless steel (SS304)\u003c\/li\u003e \u003cli\u003e Operating pressure: 1.0 bar \/ 15 PSI\u003c\/li\u003e \u003cli\u003e Max pressure: 2 bar \/ 30 PSI\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e \u003cstrong\u003eIn the Box:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e MiniUni™ Tank\u003c\/li\u003e \u003cli\u003e Base with silicone gasket\u003c\/li\u003e \u003cli\u003e Wall bracket and wall support\u003c\/li\u003e \u003cli\u003e Wall bracket safety pin\u003c\/li\u003e \u003cli\u003e Composite T.C. adapter 4\" to 34mm\u003c\/li\u003e \u003cli\u003e Airlock, 3-piece with holder\u003c\/li\u003e \u003cli\u003e 4\" tri-clamp\u003c\/li\u003e \u003cli\u003e 2\" tri-clamp\u003c\/li\u003e \u003cli\u003e 2\" T.C. blind cap\u003c\/li\u003e \u003cli\u003e T.C. gaskets\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e \u003cstrong\u003eFor User Manuals and support, please follow this link to \u003ca href=\"https:\/\/docs.brewtools.com\/user-manuals\/fermentation\/miniuni-tm\" target=\"_blank\"\u003eBrewtools Docs\u003c\/a\u003e.\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e \u003c\/p\u003e \u003cdiv class=\"iframe-container\"\u003e \u003ciframe allowfullscreen=\"\" frameborder=\"0\" src=\"https:\/\/www.youtube.com\/embed\/qYIpWSYjDNM?modestbranding=1\u0026amp;rel=0\"\u003e\u003c\/iframe\u003e\n\u003c\/div\u003e \u003cstyle type=\"text\/css\"\u003e .iframe-container{ position: relative; width: 100%; max-height: 65vh; padding-bottom: 56.25%; height: 0; } .iframe-container iframe{ position: absolute; top:0; left: 0; width: 100%; height: 100%; } @media screen and (min-width: 992px) { .iframe-container{ transform: scale(0.8); } }\u003c\/style\u003e \u003cp\u003e \u003c\/p\u003e \u003cdiv class=\"iframe-container\"\u003e \u003ciframe allowfullscreen=\"\" frameborder=\"0\" src=\"https:\/\/www.youtube.com\/embed\/YAJVj26A6nA?modestbranding=1\u0026amp;rel=0\"\u003e\u003c\/iframe\u003e\n\u003c\/div\u003e \u003cstyle type=\"text\/css\"\u003e .iframe-container{ position: relative; width: 100%; max-height: 65vh; padding-bottom: 56.25%; height: 0; } .iframe-container iframe{ position: absolute; top:0; left: 0; width: 100%; height: 100%; } @media screen and (min-width: 992px) { .iframe-container{ transform: scale(0.8); } }\u003c\/style\u003e","brand":"BrewTools","offers":[{"title":"Default Title","offer_id":51917424230689,"sku":"BT1105","price":530.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/7521\/2321\/files\/53237.jpg?v=1760472982"},{"product_id":"brewtools-f300-unitank-3276-gallon-capacity-120290l","title":"Brewtools | F300 Unitank | 32-76 Gallon Capacity | 120-290L","description":"\u003cul\u003e \u003cli\u003e Ferment, cold crash, and carbonate beer all in one vessel with the Brewtools F-Series Unitank\u003c\/li\u003e \u003cli\u003e Cooling jacket welded to the vertical walls of the tank provide superior cooling capabilities compared to in-solution cooling coils\u003c\/li\u003e \u003cli\u003e Made from stainless steel throughout with Brewtools' proprietary PureBlast™ surface—no passivation required, simply rinse with warm water before your first use\u003c\/li\u003e \u003cli\u003e Pressure rated to 30 PSI so you can safely ferment under pressure and pressure transfer finished beer to kegs with virtually no oxygen pickup\u003c\/li\u003e \u003cli\u003e Brewtools is a Norwegian brand known for high-quality products made without compromise. From brewing systems to fermenters, they continue to push the envelope of innovation for homebrewers around the globe\u003c\/li\u003e \u003cli\u003e All valves, fittings, and gaskets come included\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e Brewtools Unitanks are fermenters made for ambitious homebrewers and small breweries. As part of the Brewtools identity, they've explored new techniques and solutions. This has resulted in a series of high end fermentation tanks with new features and a lot of possibilities.\u003c\/p\u003e \u003cp\u003e \u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e Brewtools PureBlast™ surface inside and out which eliminate the use of wax and polishing compounds and does not require passivation.\u003c\/li\u003e \u003cli\u003e Cooling jacket in the vertical walls offers efficient cooling without the hassle of cleaning a spiral.\u003c\/li\u003e \u003cli\u003e Many options for connecting accessories like sensors, heaters, carb. stones and other accessories.\u003c\/li\u003e \u003cli\u003e Pressure rated for 2 bar \/ 30 PSI\u003c\/li\u003e \u003cli\u003e Cooling jacket pressure rated for 0.5 bar \/ 7 PSI\u003c\/li\u003e \u003cli\u003e 8\" TC port on top for easy access.\u003c\/li\u003e \u003cli\u003e 2\" TC dump and racking valves.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e BrewTools Unitanks are designed and manufactured with special attention to safety and quality. They are tested and certified according to the requirements for PED 2014\/68\/EU by a third party.\u003c\/p\u003e \u003cp\u003e \u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e Low height w\/o acc.: 66.1\"\u003c\/li\u003e \u003cli\u003e Max height w\/o acc.: 74\"\u003c\/li\u003e \u003cli\u003e Packaging size: 70.8\" (h) x 28.3\" (w) x 28.3\" (d)\u003c\/li\u003e \u003cli\u003e Net weight: 167.1 lbs\u003c\/li\u003e \u003cli\u003e Gross weight: 209.4 lbs\u003c\/li\u003e \u003cli\u003e Tank diameter (inside): Ø23.6\"\u003c\/li\u003e \u003cli\u003e Gross volume: 81.8 gal\u003c\/li\u003e \u003cli\u003e Max rec. volume: 76.6 gal\u003c\/li\u003e \u003cli\u003e Min rec. volume: 31.7 gal\u003c\/li\u003e \u003cli\u003e Volume, cone: 10.5 gal\u003c\/li\u003e \u003cli\u003e Material: 1.5mm stainless steel (SS304)\u003c\/li\u003e \u003cli\u003e Operating pressure: 1.0 bar \/ 15 PSI\u003c\/li\u003e \u003cli\u003e Max pressure: 2.0 bar \/ 30 PSI\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e \u003cstrong\u003eIn the box:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e Unitank with adjustable frame\u003c\/li\u003e \u003cli\u003e 1 pcs Analog pressure gauge, TC34mm\u003c\/li\u003e \u003cli\u003e 2 pcs Butterfly-valve, 2\"\u003c\/li\u003e \u003cli\u003e 1 pcs Butterfly-valve, 34mm DN20\u003c\/li\u003e \u003cli\u003e 1 pcs Blow-off pipe\u003c\/li\u003e \u003cli\u003e 1 pcs Racking arm 2\"\u003c\/li\u003e \u003cli\u003e 1 pcs TC elbow 90°, 2\"\u003c\/li\u003e \u003cli\u003e 1 pcs Insulation jacket, black neoprene\u003c\/li\u003e \u003cli\u003e 1 pcs Sample valve, 34mm\u003c\/li\u003e \u003cli\u003e 1 pcs TC Adapter 8\"-4\"\u003c\/li\u003e \u003cli\u003e 1 pcs TC blind cap, 4\"\u003c\/li\u003e \u003cli\u003e 1 pcs TC blind cap 2\"\u003c\/li\u003e \u003cli\u003e 2 pcs TC blind cap 1.5\"\u003c\/li\u003e \u003cli\u003e 3 pcs TC blind cap 34mm\u003c\/li\u003e \u003cli\u003e 2 pcs TC gasket 8\" lipped\u003c\/li\u003e \u003cli\u003e 2 pcs TC gasket 4\"\u003c\/li\u003e \u003cli\u003e 2 pcs TC gasket 2\" 5-pack\u003c\/li\u003e \u003cli\u003e 1 pcs TC gasket 1.5\" 5-pack\u003c\/li\u003e \u003cli\u003e 3 pcs TC gasket 34mm 5-pack\u003c\/li\u003e \u003cli\u003e 1 pcs Tri Clamp 8\"\u003c\/li\u003e \u003cli\u003e 1 pcs Tri Clamp 4\"\u003c\/li\u003e \u003cli\u003e 5 pcs Tri Clamp 2\"\u003c\/li\u003e \u003cli\u003e 2 pcs Tri Clamp 1.5\"\u003c\/li\u003e \u003cli\u003e 10 pcs Tri Clamp 34mm\u003c\/li\u003e \u003cli\u003e 1 pcs TC tool\u003c\/li\u003e \u003cli\u003e 4 pcs M10 steel\/rubber feet\u003c\/li\u003e \u003cli\u003e 1 pcs TC34mm safety valve (PRV, 2 bar)\u003c\/li\u003e \u003cli\u003e Necessary bolts and parts for assembly\u003c\/li\u003e \u003cli\u003e \u003cstrong\u003e5 year manufacturer's warranty\u003c\/strong\u003e\n\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e Recommended accessories include: HopDrop-kit, Thermowells for your sensors, 34mm Ball-Lock gas adapter for CO2 filling, Coil for sample valve, Spunding valve, Hose barbs for filling and dumping, etc.\u003c\/p\u003e \u003cp\u003e \u003cstrong\u003eFor User Manuals and support, please follow this link to \u003ca href=\"https:\/\/docs.brewtools.com\/user-manuals\/fermentation\/unitank\" target=\"_blank\"\u003eBrewtools Docs\u003c\/a\u003e.\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e \u003cem\u003eNOTE: Model in photo is a prototype. Minor changes and improvements may occur.\u003c\/em\u003e\u003c\/p\u003e \u003cdiv class=\"iframe-container\"\u003e \u003ciframe allowfullscreen=\"\" frameborder=\"0\" src=\"https:\/\/www.youtube.com\/embed\/-N25PQ8EHUg?modestbranding=1\u0026amp;rel=0\"\u003e\u003c\/iframe\u003e\n\u003c\/div\u003e \u003cstyle type=\"text\/css\"\u003e .iframe-container{ position: relative; width: 100%; max-height: 65vh; padding-bottom: 56.25%; height: 0; } .iframe-container iframe{ position: absolute; top:0; left: 0; width: 100%; height: 100%; } @media screen and (min-width: 992px) { .iframe-container{ transform: scale(0.8); } }\u003c\/style\u003e","brand":"BrewTools","offers":[{"title":"Default Title","offer_id":51917584498977,"sku":"BT1088","price":4923.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/7521\/2321\/files\/55329.jpg?v=1760480361"},{"product_id":"brewtools-miniuni-30-cooling-jacket-30l-79g","title":"Brewtools MiniUni™ 30+ | Cooling Jacket | 30L | 7.9G","description":"\u003cul\u003e \u003cli\u003e The Brewtools MiniUni™ series fermenters are high-quality, affordable and flexible tanks for fermentation, storage and serving beer\u003c\/li\u003e \u003cli\u003e The Plus models feature a built-in cooling jacket for maximum cooling power when paired with a glycol chiller\u003c\/li\u003e \u003cli\u003e Made from stainless steel throughout with Brewtools' proprietary PureBlast™ surface—no passivation required, simply rinse with warm water before your first use\u003c\/li\u003e \u003cli\u003e Pressure rated to 30 PSI so you can safely ferment under pressure and pressure transfer finished beer to kegs with virtually no oxygen pickup\u003c\/li\u003e \u003cli\u003e Brewtools is a Norwegian brand known for high-quality products made without compromise. From brewing systems to fermenters, they continue to push the envelope of innovation for homebrewers around the globe\u003c\/li\u003e \u003cli\u003e All valves, fittings, and gaskets come included\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e The MiniUni™ is a series of high-quality, affordable and flexible tanks for fermentation, storage and serving beer and endless other applications like water heating, cleaning liquid storage, HERMS setups, etc. The Plus-model also has a cooling jacket with 3\/8\" NPT threaded ports and two 1.5\" T.C. ports in the front. They can be kept in the included base, or installed on the wall with the included wall bracket. With the optional pressure kit, you can utilize the 2 bar (30 PSI) pressure rating for fermentation and carbonation.\u003c\/p\u003e \u003cp\u003e Use them to build your setup, they will last a lifetime! And as always, Brewtools appreciates any feedback or requests for accessories.\u003c\/p\u003e \u003cp\u003e \u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e PureBlast™ surface inside and out which eliminates the use of wax and polishing compounds and does not require passivation\u003c\/li\u003e \u003cli\u003e Easy cleaning with a 4\" T.C. top port and 2\" T.C. bottom port\u003c\/li\u003e \u003cli\u003e Pressure rated for 2 bar \/ 30 PSI.\u003c\/li\u003e \u003cli\u003e Wall bracket included\u003c\/li\u003e \u003cli\u003e Cooling jacket with 3\/8\" NPT ports\u003c\/li\u003e \u003cli\u003e Two 1.5\" T.C. ports\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e If you want to raise the MiniUni base and make room for an elbow with a butterfly valve or other accessories, check out the MiniUni™ Leg Kit.\u003c\/p\u003e \u003cdiv\u003e MiniUni tanks are designed and manufactured with special attention to safety and quality. They are tested and certified according to the requirements for PED 2014\/68\/EU by a third party.\u003c\/div\u003e \u003cp\u003e \u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e Packaging size: 13.3\" (w) x 13.7\" (d) x 30.3\" (h) \u003c\/li\u003e \u003cli\u003e Net weight: 31.3 lbs\u003c\/li\u003e \u003cli\u003e Gross weight: 34.8 lbs\u003c\/li\u003e \u003cli\u003e Tank diameter (inside): Ø11\"\u003c\/li\u003e \u003cli\u003e Max volume: 7.9 gal\u003c\/li\u003e \u003cli\u003e Cone volume: 0.4 gal\u003c\/li\u003e \u003cli\u003e Material: 1.5mm stainless steel (SS304)\u003c\/li\u003e \u003cli\u003e Operating pressure: 1.0 bar \/ 15 PSI\u003c\/li\u003e \u003cli\u003e Max pressure: 2 bar \/ 30 PSI\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e \u003cstrong\u003eIn the Box:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e MiniUni™ Tank\u003c\/li\u003e \u003cli\u003e Base with silicone gasket\u003c\/li\u003e \u003cli\u003e Wall bracket and wall support\u003c\/li\u003e \u003cli\u003e Wall bracket safety pin\u003c\/li\u003e \u003cli\u003e Composite T.C. adapter 4\" to 34mm\u003c\/li\u003e \u003cli\u003e Airlock, 3-piece with holder\u003c\/li\u003e \u003cli\u003e 4\" tri-clamp\u003c\/li\u003e \u003cli\u003e 2\" tri-clamp\u003c\/li\u003e \u003cli\u003e 1.5\" tri-clamp (2)\u003c\/li\u003e \u003cli\u003e 2\" T.C. blind cap\u003c\/li\u003e \u003cli\u003e 1.5\" T.C. blind cap (2)\u003c\/li\u003e \u003cli\u003e T.C. gaskets\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e \u003cstrong\u003eFor User Manuals and support, please follow this link to \u003ca href=\"https:\/\/docs.brewtools.com\/user-manuals\/fermentation\/miniuni-tm\" target=\"_blank\"\u003eBrewtools Docs\u003c\/a\u003e.\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e \u003c\/p\u003e \u003cdiv class=\"iframe-container\"\u003e \u003ciframe allowfullscreen=\"\" frameborder=\"0\" src=\"https:\/\/www.youtube.com\/embed\/YYVnTt9kOrw?modestbranding=1\u0026amp;rel=0\"\u003e\u003c\/iframe\u003e\n\u003c\/div\u003e \u003cstyle type=\"text\/css\"\u003e .iframe-container{ position: relative; width: 100%; max-height: 65vh; padding-bottom: 56.25%; height: 0; } .iframe-container iframe{ position: absolute; top:0; left: 0; width: 100%; height: 100%; } @media screen and (min-width: 992px) { .iframe-container{ transform: scale(0.8); } }\u003c\/style\u003e","brand":"BrewTools","offers":[{"title":"Default Title","offer_id":51917609894177,"sku":"BT1123","price":653.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/7521\/2321\/files\/56865.jpg?v=1760483835"},{"product_id":"brewtools-miniunitrade-40-cooling-jacket-40l-105g","title":"Brewtools MiniUni™ 40+ | Cooling Jacket | 40L | 10.5G","description":"\u003cul\u003e \u003cli\u003e The Brewtools MiniUni™ series fermenters are high-quality, affordable and flexible tanks for fermentation, storage and serving beer\u003c\/li\u003e \u003cli\u003e The Plus models feature a built-in cooling jacket for maximum cooling power when paired with a glycol chiller\u003c\/li\u003e \u003cli\u003e Made from stainless steel throughout with Brewtools' proprietary PureBlast™ surface—no passivation required, simply rinse with warm water before your first use\u003c\/li\u003e \u003cli\u003e Pressure rated to 30 PSI so you can safely ferment under pressure and pressure transfer finished beer to kegs with virtually no oxygen pickup\u003c\/li\u003e \u003cli\u003e Brewtools is a Norwegian brand known for high-quality products made without compromise. From brewing systems to fermenters, they continue to push the envelope of innovation for homebrewers around the globe\u003c\/li\u003e \u003cli\u003e All valves, fittings, and gaskets come included\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e The MiniUni™ is a series of high-quality, affordable and flexible tanks for fermentation, storage and serving beer and endless other applications like water heating, cleaning liquid storage, HERMS setups, etc. The Plus-model also has a cooling jacket with 3\/8\" NPT threaded ports and two 1.5\" T.C. ports in the front. They can be kept in the included base, or installed on the wall with the included wall bracket. With the optional pressure kit, you can utilize the 2 bar (30 PSI) pressure rating for fermentation and carbonation.\u003c\/p\u003e \u003cp\u003e Use them to build your setup, they will last a lifetime! And as always, Brewtools appreciates any feedback or requests for accessories.\u003c\/p\u003e \u003cp\u003e \u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e PureBlast™ surface inside and out which eliminates the use of wax and polishing compounds and does not require passivation\u003c\/li\u003e \u003cli\u003e Easy cleaning with a 4\" T.C. top port and 2\" T.C. bottom port\u003c\/li\u003e \u003cli\u003e Pressure rated for 2 bar \/ 30 PSI.\u003c\/li\u003e \u003cli\u003e Wall bracket included\u003c\/li\u003e \u003cli\u003e Cooling jacket with 3\/8\" NPT ports\u003c\/li\u003e \u003cli\u003e Two 1.5\" T.C. ports\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e If you want to raise the MiniUni base and make room for an elbow with a butterfly valve or other accessories, check out the MiniUni™ Leg Kit.\u003c\/p\u003e \u003cdiv\u003e MiniUni tanks are designed and manufactured with special attention to safety and quality. They are tested and certified according to the requirements for PED 2014\/68\/EU by a third party.\u003c\/div\u003e \u003cp\u003e \u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e Packaging size: 13.3\" (w) x 13.7\" (d) x 36.6\" (h) \u003c\/li\u003e \u003cli\u003e Net weight: 37.9 lbs\u003c\/li\u003e \u003cli\u003e Gross weight: 41.8 lbs\u003c\/li\u003e \u003cli\u003e Tank diameter (inside): Ø11\"\u003c\/li\u003e \u003cli\u003e Max volume: 10.5 gal\u003c\/li\u003e \u003cli\u003e Cone volume: 0.4 gal\u003c\/li\u003e \u003cli\u003e Material: 1.5mm stainless steel (SS304)\u003c\/li\u003e \u003cli\u003e Operating pressure: 1.0 bar \/ 15 PSI\u003c\/li\u003e \u003cli\u003e Max pressure: 2 bar \/ 30 PSI\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e \u003cstrong\u003eIn the Box:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e MiniUni™ Tank\u003c\/li\u003e \u003cli\u003e Base with silicone gasket\u003c\/li\u003e \u003cli\u003e Wall bracket and wall support\u003c\/li\u003e \u003cli\u003e Wall bracket safety pin\u003c\/li\u003e \u003cli\u003e Composite T.C. adapter 4\" to 34mm\u003c\/li\u003e \u003cli\u003e Airlock, 3-piece with holder\u003c\/li\u003e \u003cli\u003e 4\" tri-clamp\u003c\/li\u003e \u003cli\u003e 2\" tri-clamp\u003c\/li\u003e \u003cli\u003e 1.5\" tri-clamp (2)\u003c\/li\u003e \u003cli\u003e 2\" T.C. blind cap\u003c\/li\u003e \u003cli\u003e 1.5\" T.C. blind cap (2)\u003c\/li\u003e \u003cli\u003e T.C. gaskets\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e \u003cstrong\u003eFor User Manuals and support, please follow this link to \u003ca href=\"https:\/\/docs.brewtools.com\/user-manuals\/fermentation\/miniuni-tm\" target=\"_blank\"\u003eBrewtools Docs\u003c\/a\u003e.\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e \u003c\/p\u003e \u003cdiv class=\"iframe-container\"\u003e \u003ciframe allowfullscreen=\"\" frameborder=\"0\" src=\"https:\/\/www.youtube.com\/embed\/YYVnTt9kOrw?modestbranding=1\u0026amp;rel=0\"\u003e\u003c\/iframe\u003e\n\u003c\/div\u003e \u003cstyle type=\"text\/css\"\u003e .iframe-container{ position: relative; width: 100%; max-height: 65vh; padding-bottom: 56.25%; height: 0; } .iframe-container iframe{ position: absolute; top:0; left: 0; width: 100%; height: 100%; } @media screen and (min-width: 992px) { .iframe-container{ transform: scale(0.8); } }\u003c\/style\u003e","brand":"BrewTools","offers":[{"title":"Default Title","offer_id":51917609926945,"sku":"BT1124","price":740.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/7521\/2321\/files\/56863.jpg?v=1760483837"},{"product_id":"brewtools-miniuni-50-cooling-jacket-50l-132g","title":"Brewtools MiniUni™ 50+ | Cooling Jacket | 50L | 13.2G","description":"\u003cul\u003e \u003cli\u003e The Brewtools MiniUni™ series fermenters are high-quality, affordable and flexible tanks for fermentation, storage and serving beer\u003c\/li\u003e \u003cli\u003e The Plus models feature a built-in cooling jacket for maximum cooling power when paired with a glycol chiller\u003c\/li\u003e \u003cli\u003e Made from stainless steel throughout with Brewtools' proprietary PureBlast™ surface—no passivation required, simply rinse with warm water before your first use\u003c\/li\u003e \u003cli\u003e Pressure rated to 30 PSI so you can safely ferment under pressure and pressure transfer finished beer to kegs with virtually no oxygen pickup\u003c\/li\u003e \u003cli\u003e Brewtools is a Norwegian brand known for high-quality products made without compromise. From brewing systems to fermenters, they continue to push the envelope of innovation for homebrewers around the globe\u003c\/li\u003e \u003cli\u003e All valves, fittings, and gaskets come included\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e The MiniUni™ is a series of high-quality, affordable and flexible tanks for fermentation, storage and serving beer and endless other applications like water heating, cleaning liquid storage, HERMS setups, etc. The Plus-model also has a cooling jacket with 3\/8\" NPT threaded ports and two 1.5\" T.C. ports in the front. They can be kept in the included base, or installed on the wall with the included wall bracket. With the optional pressure kit, you can utilize the 2 bar (30 PSI) pressure rating for fermentation and carbonation.\u003c\/p\u003e \u003cp\u003e Use them to build your setup, they will last a lifetime! And as always, Brewtools appreciates any feedback or requests for accessories.\u003c\/p\u003e \u003cp\u003e \u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e PureBlast™ surface inside and out which eliminates the use of wax and polishing compounds and does not require passivation\u003c\/li\u003e \u003cli\u003e Easy cleaning with a 4\" T.C. top port and 2\" T.C. bottom port\u003c\/li\u003e \u003cli\u003e Pressure rated for 2 bar \/ 30 PSI.\u003c\/li\u003e \u003cli\u003e Wall bracket included\u003c\/li\u003e \u003cli\u003e Cooling jacket with 3\/8\" NPT ports\u003c\/li\u003e \u003cli\u003e Two 1.5\" T.C. ports\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e If you want to raise the MiniUni base and make room for an elbow with a butterfly valve or other accessories, check out the MiniUni™ Leg Kit.\u003c\/p\u003e \u003cdiv\u003e MiniUni tanks are designed and manufactured with special attention to safety and quality. They are tested and certified according to the requirements for PED 2014\/68\/EU by a third party.\u003c\/div\u003e \u003cp\u003e \u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e Packaging size: 13.3\" (w) x 13.7\" (d) x 42.9\" (h)\u003c\/li\u003e \u003cli\u003e Net weight: 45.6 lbs\u003c\/li\u003e \u003cli\u003e Gross weight: 48.9 lbs\u003c\/li\u003e \u003cli\u003e Tank diameter (inside): Ø11\"\u003c\/li\u003e \u003cli\u003e Max volume: 13.2 gal\u003c\/li\u003e \u003cli\u003e Cone volume: 0.4 gal\u003c\/li\u003e \u003cli\u003e Material: 1.5mm stainless steel (SS304)\u003c\/li\u003e \u003cli\u003e Operating pressure: 1.0 bar \/ 15 PSI\u003c\/li\u003e \u003cli\u003e Max pressure: 2 bar \/ 30 PSI\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e \u003cstrong\u003eIn the Box:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e MiniUni™ Tank\u003c\/li\u003e \u003cli\u003e Base with silicone gasket\u003c\/li\u003e \u003cli\u003e Wall bracket and wall support\u003c\/li\u003e \u003cli\u003e Wall bracket safety pin\u003c\/li\u003e \u003cli\u003e Composite T.C. adapter 4\" to 34mm\u003c\/li\u003e \u003cli\u003e Airlock, 3-piece with holder\u003c\/li\u003e \u003cli\u003e 4\" tri-clamp\u003c\/li\u003e \u003cli\u003e 2\" tri-clamp\u003c\/li\u003e \u003cli\u003e 1.5\" tri-clamp (2)\u003c\/li\u003e \u003cli\u003e 2\" T.C. blind cap\u003c\/li\u003e \u003cli\u003e 1.5\" T.C. blind cap (2)\u003c\/li\u003e \u003cli\u003e T.C. gaskets\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e \u003cstrong\u003eFor User Manuals and support, please follow this link to \u003ca href=\"https:\/\/docs.brewtools.com\/user-manuals\/fermentation\/miniuni-tm\" target=\"_blank\"\u003eBrewtools Docs\u003c\/a\u003e.\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e \u003c\/p\u003e \u003cdiv class=\"iframe-container\"\u003e \u003ciframe allowfullscreen=\"\" frameborder=\"0\" src=\"https:\/\/www.youtube.com\/embed\/YYVnTt9kOrw?modestbranding=1\u0026amp;rel=0\"\u003e\u003c\/iframe\u003e\n\u003c\/div\u003e \u003cstyle type=\"text\/css\"\u003e .iframe-container{ position: relative; width: 100%; max-height: 65vh; padding-bottom: 56.25%; height: 0; } .iframe-container iframe{ position: absolute; top:0; left: 0; width: 100%; height: 100%; } @media screen and (min-width: 992px) { .iframe-container{ transform: scale(0.8); } }\u003c\/style\u003e","brand":"BrewTools","offers":[{"title":"Default Title","offer_id":51917610385697,"sku":"BT1125","price":801.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/7521\/2321\/files\/56861.jpg?v=1760670310"},{"product_id":"brewtools-f40-unitank-light-52105-gallon-capacity-2040l","title":"Brewtools | F40 Unitank Light | 5.2-10.5 Gallon Capacity | 20-40L","description":"\u003cul\u003e \u003cli\u003e Unitank Light offers the same tank body as the standard Brewtools Unitank with a slight difference in included accessories for a more affordable price\u003c\/li\u003e \u003cli\u003e Ferment, cold crash, and carbonate beer all in one vessel with the Brewtools F-Series Unitank\u003c\/li\u003e \u003cli\u003e Cooling jacket welded to the vertical walls of the tank provide superior cooling capabilities compared to in-solution cooling coils\u003c\/li\u003e \u003cli\u003e Made from stainless steel throughout with Brewtools' proprietary PureBlast™ surface—no passivation required, simply rinse with warm water before your first use\u003c\/li\u003e \u003cli\u003e Pressure rated to 30 PSI so you can safely ferment under pressure and pressure transfer finished beer to kegs with virtually no oxygen pickup\u003c\/li\u003e \u003cli\u003e Brewtools is a Norwegian brand known for high-quality products made without compromise. From brewing systems to fermenters, they continue to push the envelope of innovation for homebrewers around the globe\u003c\/li\u003e \u003cli\u003e All valves, fittings, and gaskets come included\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e Unitank Light is the same tank body as the standard Brewtools Unitank, but with slightly less equipment and some parts made from Polyketone (POK), which vastly reduces cost without compromising the user experience for smaller tanks. Unitank Light can be upgraded to a standard Unitank where you prefer.\u003c\/p\u003e \u003cp\u003e \u003cstrong\u003eKey Differences:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e CleanCore butterfly valves made from Polyketone\u003c\/li\u003e \u003cli\u003e Barbed blow-off PRV \u003cul\u003e \u003cli\u003e Can be set to open during fermentation for blow-off\u003c\/li\u003e \u003cli\u003e Also acts as 2 bar \/ 30 psi safety valve\u003c\/li\u003e \u003c\/ul\u003e \u003c\/li\u003e \u003cli\u003e Pushfit sample valve \u003cul\u003e \u003cli\u003e Compatible with optional Push-fit Coil and Adapter\u003c\/li\u003e \u003c\/ul\u003e \u003c\/li\u003e \u003cli\u003e Polyketone 8” to 3” tri-clamp lid adapter replaces stainless steel adapter\u003c\/li\u003e \u003cli\u003e Polyketone racking arm replaces stainless steel racking arm\u003c\/li\u003e \u003cli\u003e Does not include neoprene insulation jacket, ss blow-off tube or ss blow-off valve\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e Brewtools Unitanks are fermenters made for ambitious homebrewers and small breweries. As part of the Brewtools identity, they've explored new techniques and solutions. This has resulted in a series of high-end fermentation tanks with new features and a lot of possibilities.\u003c\/p\u003e \u003cp\u003e \u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e Brewtools PureBlast™ surface inside and out which eliminate the use of wax and polishing compounds and does not require passivation\u003c\/li\u003e \u003cli\u003e Cooling jacket in the vertical walls offers efficient cooling without the hassle of cleaning a coil\u003c\/li\u003e \u003cli\u003e Many options for connecting accessories like sensors, heaters, carb. stones and other accessories\u003c\/li\u003e \u003cli\u003e Conical pressure rated for 2 bar \/ 30 PSI\u003c\/li\u003e \u003cli\u003e Cooling jacket pressure rated for 0.5 bar \/ 7 PSI\u003c\/li\u003e \u003cli\u003e 8\" TC port on top for easy access\u003c\/li\u003e \u003cli\u003e 2\" TC dump and racking valves\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e Brewtools Unitanks are designed and manufactured with special attention to safety and quality. They are tested and certified according to the requirements for PED 2014\/68\/EU by a third party.\u003c\/p\u003e \u003cp\u003e \u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e Low height w\/o acc.: 32.6\"\u003c\/li\u003e \u003cli\u003e Max height w\/o acc.: 40.5\"\u003c\/li\u003e \u003cli\u003e Packaging size: 33.4\" (h) x 20.5\" (w) x 20.5\" (d) \u003c\/li\u003e \u003cli\u003e Net weight: 73 lbs\u003c\/li\u003e \u003cli\u003e Gross weight: 88 lbs\u003c\/li\u003e \u003cli\u003e Tank diameter (inside): Ø15.75\"\u003c\/li\u003e \u003cli\u003e Gross volume: 13.5 gal\u003c\/li\u003e \u003cli\u003e Max rec. volume: 10.5 gal\u003c\/li\u003e \u003cli\u003e Min rec. volume: 5.3 gal\u003c\/li\u003e \u003cli\u003e Volume, cone: 3.1 gal\u003c\/li\u003e \u003cli\u003e Material: 1.5mm stainless steel (SS304)\u003c\/li\u003e \u003cli\u003e Operating pressure: 1.0 bar \/ 15 PSI\u003c\/li\u003e \u003cli\u003e Max pressure: 2.0 bar \/ 30 PSI\u003c\/li\u003e \u003cli\u003e Min. pH: 4.0\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e \u003cstrong\u003eIn the box:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e Unitank with adjustable frame\u003c\/li\u003e \u003cli\u003e 1 pcs Analog pressure gauge, TC34mm\u003c\/li\u003e \u003cli\u003e 2 pcs CleanCore Butterfly-valve, 2\"\u003c\/li\u003e \u003cli\u003e 1 pcs Racking arm 2\", POK\u003c\/li\u003e \u003cli\u003e 1 pcs TC elbow 90°, 2\"\u003c\/li\u003e \u003cli\u003e 1 pcs Sample valve, 34mm, POK\u003c\/li\u003e \u003cli\u003e 1 pcs TC Adapter 8\"-3\", POK\u003c\/li\u003e \u003cli\u003e 1 pcs TC blind cap, 3\"\u003c\/li\u003e \u003cli\u003e 1 pcs TC blind cap 2\"\u003c\/li\u003e \u003cli\u003e 2 pcs TC blind cap 1.5\"\u003c\/li\u003e \u003cli\u003e 4 pcs TC blind cap 34mm\u003c\/li\u003e \u003cli\u003e 2 pcs TC gasket 8\" lipped\u003c\/li\u003e \u003cli\u003e 2 pcs TC gasket 3\"\u003c\/li\u003e \u003cli\u003e 2 pcs TC gasket 2\" 5-pack\u003c\/li\u003e \u003cli\u003e 1 pcs TC gasket 1.5\" 5-pack\u003c\/li\u003e \u003cli\u003e 3 pcs TC gasket 34mm 5-pack (DN20)\u003c\/li\u003e \u003cli\u003e 1 pcs Tri Clamp 8\"\u003c\/li\u003e \u003cli\u003e 1 pcs Tri Clamp 3\"\u003c\/li\u003e \u003cli\u003e 5 pcs Tri Clamp 2\"\u003c\/li\u003e \u003cli\u003e 2 pcs Tri Clamp 1.5\"\u003c\/li\u003e \u003cli\u003e 9 pcs Tri Clamp 34mm\u003c\/li\u003e \u003cli\u003e 1 pcs TC tool\u003c\/li\u003e \u003cli\u003e 4 pcs M10 steel\/rubber feet\u003c\/li\u003e \u003cli\u003e 1 pcs TC34mm pull-type PRV\/Safety valve with 7mm barb\u003c\/li\u003e \u003cli\u003e 1.5m (4.9') Silicone tube 6x10mm\u003c\/li\u003e \u003cli\u003e Necessary bolts and parts for assembly\u003c\/li\u003e \u003cli\u003e \u003cstrong\u003e5 year manufacturer's warranty\u003c\/strong\u003e\n\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e Recommended accessories include: HopDrop-kit, Thermowells for your sensors, 34mm Ball-Lock gas adapter for CO2 filling, Carb. stone kit with Ball-Lock, Coil for sample valve, Spunding valve, Hose barbs for filling and dumping, 2\" sight glass etc.\u003c\/p\u003e \u003cp\u003e \u003cstrong\u003eFor User Manuals and support, please follow this link to \u003ca href=\"https:\/\/docs.brewtools.com\/user-manuals\/fermentation\/unitank\" target=\"_blank\"\u003eBrewtools Docs\u003c\/a\u003e.\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e \u003cem\u003eNOTE: Model in photo is a prototype. Minor changes and improvements may occur.\u003c\/em\u003e\u003c\/p\u003e","brand":"BrewTools","offers":[{"title":"Default Title","offer_id":51917922959649,"sku":"BT1094","price":1603.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/7521\/2321\/files\/59778.jpg?v=1760498117"},{"product_id":"brewtools-f80-unitank-light-52198-gallon-capacity-2075l","title":"Brewtools | F80 Unitank Light | 5.2-19.8 Gallon Capacity | 20-75L","description":"\u003cul\u003e \u003cli\u003e Unitank Light offers the same tank body as the standard Brewtools Unitank with a slight difference in included accessories for a more affordable price\u003c\/li\u003e \u003cli\u003e Ferment, cold crash, and carbonate beer all in one vessel with the Brewtools F-Series Unitank\u003c\/li\u003e \u003cli\u003e Cooling jacket welded to the vertical walls of the tank provide superior cooling capabilities compared to in-solution cooling coils\u003c\/li\u003e \u003cli\u003e Made from stainless steel throughout with Brewtools' proprietary PureBlast™ surface—no passivation required, simply rinse with warm water before your first use\u003c\/li\u003e \u003cli\u003e Pressure rated to 30 PSI so you can safely ferment under pressure and pressure transfer finished beer to kegs with virtually no oxygen pickup\u003c\/li\u003e \u003cli\u003e Brewtools is a Norwegian brand known for high-quality products made without compromise. From brewing systems to fermenters, they continue to push the envelope of innovation for homebrewers around the globe\u003c\/li\u003e \u003cli\u003e All valves, fittings, and gaskets come included\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e Unitank Light is the same tank body as the standard Brewtools Unitank, but with slightly less equipment and some parts made from Polyketone (POK), which vastly reduces cost without compromising the user experience for smaller tanks. Unitank Light can be upgraded to a standard Unitank where you prefer.\u003c\/p\u003e \u003cp\u003e \u003cstrong\u003eKey Differences:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e CleanCore butterfly valves made from Polyketone\u003c\/li\u003e \u003cli\u003e Barbed blow-off PRV \u003cul\u003e \u003cli\u003e Can be set to open during fermentation for blow-off\u003c\/li\u003e \u003cli\u003e Also acts as 2 bar \/ 30 psi safety valve\u003c\/li\u003e \u003c\/ul\u003e \u003c\/li\u003e \u003cli\u003e Pushfit sample valve \u003cul\u003e \u003cli\u003e Compatible with optional Push-fit Coil and Adapter\u003c\/li\u003e \u003c\/ul\u003e \u003c\/li\u003e \u003cli\u003e Polyketone 8” to 3” tri-clamp lid adapter replaces stainless steel adapter\u003c\/li\u003e \u003cli\u003e Polyketone racking arm replaces stainless steel racking arm\u003c\/li\u003e \u003cli\u003e Does not include neoprene insulation jacket, ss blow-off tube or ss blow-off valve\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e Brewtools Unitanks are fermenters made for ambitious homebrewers and small breweries. As part of the Brewtools identity, they've explored new techniques and solutions. This has resulted in a series of high-end fermentation tanks with new features and a lot of possibilities.\u003c\/p\u003e \u003cp\u003e \u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e Brewtools PureBlast™ surface inside and out which eliminate the use of wax and polishing compounds and does not require passivation\u003c\/li\u003e \u003cli\u003e Cooling jacket in the vertical walls offers efficient cooling without the hassle of cleaning a coil\u003c\/li\u003e \u003cli\u003e Many options for connecting accessories like sensors, heaters, carb. stones and other accessories\u003c\/li\u003e \u003cli\u003e Conical pressure rated for 2 bar \/ 30 PSI\u003c\/li\u003e \u003cli\u003e Cooling jacket pressure rated for 0.5 bar \/ 7 PSI\u003c\/li\u003e \u003cli\u003e 8\" TC port on top for easy access\u003c\/li\u003e \u003cli\u003e 2\" TC dump and racking valves\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e Brewtools Unitanks are designed and manufactured with special attention to safety and quality. They are tested and certified according to the requirements for PED 2014\/68\/EU by a third party.\u003c\/p\u003e \u003cp\u003e \u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e Low height w\/o acc.: 43.3\"\u003c\/li\u003e \u003cli\u003e Max height w\/o acc.: 51.2\"\u003c\/li\u003e \u003cli\u003e Packaging size: 44.5\" (h) x 20.5\" (w) x 20.5\" (d) \u003c\/li\u003e \u003cli\u003e Net weight: 88 lbs\u003c\/li\u003e \u003cli\u003e Gross weight: 101 lbs\u003c\/li\u003e \u003cli\u003e Tank diameter (inside): Ø15.75\"\u003c\/li\u003e \u003cli\u003e Gross volume: 22.7 gal\u003c\/li\u003e \u003cli\u003e Max rec. volume: 21.1 gal\u003c\/li\u003e \u003cli\u003e Min rec. volume: 5.3 gal\u003c\/li\u003e \u003cli\u003e Volume, cone: 3.1 gal\u003c\/li\u003e \u003cli\u003e Material: 1.5mm stainless steel (SS304)\u003c\/li\u003e \u003cli\u003e Operating pressure: 1.0 bar \/ 15 PSI\u003c\/li\u003e \u003cli\u003e Max pressure: 2.0 bar \/ 30 PSI\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e \u003cstrong\u003eIn the box:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e Unitank with adjustable frame\u003c\/li\u003e \u003cli\u003e 1 pcs Analog pressure gauge, TC34mm\u003c\/li\u003e \u003cli\u003e 2 pcs CleanCore Butterfly-valve, 2\"\u003c\/li\u003e \u003cli\u003e 1 pcs Racking arm 2\", POK\u003c\/li\u003e \u003cli\u003e 1 pcs TC elbow 90°, 2\"\u003c\/li\u003e \u003cli\u003e 1 pcs Sample valve, 34mm, POK\u003c\/li\u003e \u003cli\u003e 1 pcs TC Adapter 8\"-3\", POK\u003c\/li\u003e \u003cli\u003e 1 pcs TC blind cap, 3\"\u003c\/li\u003e \u003cli\u003e 1 pcs TC blind cap 2\"\u003c\/li\u003e \u003cli\u003e 2 pcs TC blind cap 1.5\"\u003c\/li\u003e \u003cli\u003e 4 pcs TC blind cap 34mm\u003c\/li\u003e \u003cli\u003e 2 pcs TC gasket 8\" lipped\u003c\/li\u003e \u003cli\u003e 2 pcs TC gasket 3\"\u003c\/li\u003e \u003cli\u003e 2 pcs TC gasket 2\" 5-pack\u003c\/li\u003e \u003cli\u003e 1 pcs TC gasket 1.5\" 5-pack\u003c\/li\u003e \u003cli\u003e 3 pcs TC gasket 34mm 5-pack (DN20)\u003c\/li\u003e \u003cli\u003e 1 pcs Tri Clamp 8\"\u003c\/li\u003e \u003cli\u003e 1 pcs Tri Clamp 3\"\u003c\/li\u003e \u003cli\u003e 5 pcs Tri Clamp 2\"\u003c\/li\u003e \u003cli\u003e 2 pcs Tri Clamp 1.5\"\u003c\/li\u003e \u003cli\u003e 9 pcs Tri Clamp 34mm\u003c\/li\u003e \u003cli\u003e 1 pcs TC tool\u003c\/li\u003e \u003cli\u003e 4 pcs M10 steel\/rubber feet\u003c\/li\u003e \u003cli\u003e 1 pcs TC34mm pull-type PRV\/Safety valve with 7mm barb\u003c\/li\u003e \u003cli\u003e 1.5m (4.9') Silicone tube 6x10mm\u003c\/li\u003e \u003cli\u003e Necessary bolts and parts for assembly\u003c\/li\u003e \u003cli\u003e \u003cstrong\u003e5 year manufacturer's warranty\u003c\/strong\u003e\n\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e Recommended accessories include: HopDrop-kit, Thermowells for your sensors, 34mm Ball-Lock gas adapter for CO2 filling, Carb. stone kit with Ball-Lock, Coil for sample valve, Spunding valve, Hose barbs for filling and dumping, 2\" sight glass etc.\u003c\/p\u003e \u003cp\u003e \u003cstrong\u003eFor User Manuals and support, please follow this link to \u003ca href=\"https:\/\/docs.brewtools.com\/user-manuals\/fermentation\/unitank\" target=\"_blank\"\u003eBrewtools Docs\u003c\/a\u003e.\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e \u003cem\u003eNOTE: Model in photo is a prototype. Minor changes and improvements may occur.\u003c\/em\u003e\u003c\/p\u003e","brand":"BrewTools","offers":[{"title":"Default Title","offer_id":51917922992417,"sku":"BT1095","price":1785.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/7521\/2321\/files\/59782.jpg?v=1760498119"},{"product_id":"brewtools-brite-40-52105-gallon-capacity-tank","title":"Brewtools | Brite 40 | 5.2-10.5 Gallon Capacity Brite Tank","description":"\u003cul\u003e\r\n\t\u003cli\u003e\r\n\t\tStorage, packaging, and finishing tanks made for ambitious homebrewers and small breweries\u003c\/li\u003e\r\n\t\u003cli\u003e\r\n\t\tCooling jacket welded to the vertical walls of the tank provide superior cooling capabilities compared to in-solution cooling coils\u003c\/li\u003e\r\n\t\u003cli\u003e\r\n\t\tMade from stainless steel throughout with Brewtools' proprietary PureBlast™ surface—no passivation required, simply rinse with warm water before your first use\u003c\/li\u003e\r\n\t\u003cli\u003e\r\n\t\tPressure rated to 30 PSI so you can safely carbonate and pressure transfer finished beer to kegs with virtually no oxygen pickup\u003c\/li\u003e\r\n\t\u003cli\u003e\r\n\t\tAll valves, fittings, and gaskets come included\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\r\n\tBrewtools Brite Tanks are storage, packaging, and finishing tanks made for ambitious homebrewers and small breweries. As part of the Brewtools identity, they've explored new techniques and solutions. This has resulted in a series of high-end tanks with new features and a lot of possibilities.\u003c\/p\u003e\r\n\u003cp\u003e\r\n\t\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\t\u003cli\u003e\r\n\t\tBrewtools PureBlast™ surface inside and out which eliminate the use of wax and polishing compounds and does not require passivation.\u003c\/li\u003e\r\n\t\u003cli\u003e\r\n\t\tCooling jacket in the vertical walls offers efficient cooling without the hassle of cleaning a spiral.\u003c\/li\u003e\r\n\t\u003cli\u003e\r\n\t\tMany options for connecting accessories like sensors, carb. stones and other accessories.\u003c\/li\u003e\r\n\t\u003cli\u003e\r\n\t\tPressure rated for 2 bar \/ 30 PSI.\u003c\/li\u003e\r\n\t\u003cli\u003e\r\n\t\t8\" TC port on top for easy access.\u003c\/li\u003e\r\n\t\u003cli\u003e\r\n\t\t2\" TC dump valve\u003c\/li\u003e\r\n\t\u003cli\u003e\r\n\t\t3x 1.5\" DN32 ports (1 on the back) + 1x TC34mm port for sample valve\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\r\n\tBrewtools Brite Tanks are designed and manufactured with special attention to safety and quality.\u003c\/p\u003e\r\n\u003cp\u003e\r\n\tThey are tested and certified according to the requirements for PED 2014\/68\/EU by a third party.\u003c\/p\u003e\r\n\u003cp\u003e\r\n\t\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\t\u003cli\u003e\r\n\t\tHeight without accessories: 28.3\" (72 cm)\u003c\/li\u003e\r\n\t\u003cli\u003e\r\n\t\tPackaging size: 25.1\" (h) x 19.6\" (w) x 19.6\" (d)\u003c\/li\u003e\r\n\t\u003cli\u003e\r\n\t\tNet weight: TBD\u003c\/li\u003e\r\n\t\u003cli\u003e\r\n\t\tGross weight: TBD\u003c\/li\u003e\r\n\t\u003cli\u003e\r\n\t\tTank diameter (inside): 15.7\" Ø\u003c\/li\u003e\r\n\t\u003cli\u003e\r\n\t\tGross volume: 12.1 gallons\u003c\/li\u003e\r\n\t\u003cli\u003e\r\n\t\tMax rec. volume: 10.5 gallons\u003c\/li\u003e\r\n\t\u003cli\u003e\r\n\t\tMin rec. volume: 5.2 gallons\u003c\/li\u003e\r\n\t\u003cli\u003e\r\n\t\tMaterial: 1.5mm stainless steel (SS304)\u003c\/li\u003e\r\n\t\u003cli\u003e\r\n\t\tOperating pressure: 1.0 bar \/ 15 PSI\u003c\/li\u003e\r\n\t\u003cli\u003e\r\n\t\tMax pressure: 2.0 bar \/ 30 PSI\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\r\n\t \u003c\/p\u003e\r\n\u003cp\u003e\r\n\tThe tank comes with insulation jacket, stainless steel butterfly valve and the necessary piping and clamps\/gaskets.\u003c\/p\u003e\r\n\u003cp\u003e\r\n\tFor more detailed information and user manual, please visit \u003ca href=\"https:\/\/docs.brewtools.com\/\" target=\"_blank\"\u003edocs.brewtools.com\u003c\/a\u003e\u003c\/p\u003e\r\n","brand":"BrewTools","offers":[{"title":"Default Title","offer_id":51917974634785,"sku":"BT1400","price":1850.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/7521\/2321\/files\/62465.png?v=1760501814"},{"product_id":"brewtools-brite-80-52198-gallon-capacity-tank","title":"Brewtools | Brite 80 | 5.2-19.8 Gallon Capacity Brite Tank","description":"\u003cul\u003e \u003cli\u003e Storage, packaging, and finishing tanks made for ambitious homebrewers and small breweries\u003c\/li\u003e \u003cli\u003e Cooling jacket welded to the vertical walls of the tank provide superior cooling capabilities compared to in-solution cooling coils\u003c\/li\u003e \u003cli\u003e Made from stainless steel throughout with Brewtools' proprietary PureBlast™ surface—no passivation required, simply rinse with warm water before your first use\u003c\/li\u003e \u003cli\u003e Pressure rated to 30 PSI so you can safely carbonate and pressure transfer finished beer to kegs with virtually no oxygen pickup\u003c\/li\u003e \u003cli\u003e All valves, fittings, and gaskets come included\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e Brewtools Brite Tanks are storage, packaging, and finishing tanks made for ambitious homebrewers and small breweries. As part of the Brewtools identity, they've explored new techniques and solutions. This has resulted in a series of high-end tanks with new features and a lot of possibilities.\u003c\/p\u003e \u003cp\u003e \u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e Brewtools PureBlast™ surface inside and out which eliminate the use of wax and polishing compounds and does not require passivation.\u003c\/li\u003e \u003cli\u003e Cooling jacket in the vertical walls offers efficient cooling without the hassle of cleaning a spiral.\u003c\/li\u003e \u003cli\u003e Many options for connecting accessories like sensors, carb. stones and other accessories.\u003c\/li\u003e \u003cli\u003e Pressure rated for 2 bar \/ 30 PSI.\u003c\/li\u003e \u003cli\u003e 8\" TC port on top for easy access.\u003c\/li\u003e \u003cli\u003e 2\" TC dump valve\u003c\/li\u003e \u003cli\u003e 3x 1.5\" DN32 ports (1 on the back) + 1x TC34mm port for sample valve\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e Brewtools Brite Tanks are designed and manufactured with special attention to safety and quality.\u003c\/p\u003e \u003cp\u003e They are tested and certified according to the requirements for PED 2014\/68\/EU by a third party.\u003c\/p\u003e \u003cp\u003e \u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e Height without accessories: 39.3\"\u003c\/li\u003e \u003cli\u003e Packaging size: 36.2\" (h) x 19.6\" (w) x 19.6 (d)\u003c\/li\u003e \u003cli\u003e Net weight: TBD\u003c\/li\u003e \u003cli\u003e Gross weight: TBD\u003c\/li\u003e \u003cli\u003e Tank diameter (inside): 15.7\" Ø\u003c\/li\u003e \u003cli\u003e Gross volume: 21.3 gallons\u003c\/li\u003e \u003cli\u003e Max rec. volume: 19.8 gallons\u003c\/li\u003e \u003cli\u003e Min rec. volume: 5.2 gallons\u003c\/li\u003e \u003cli\u003e Material: 1.5mm stainless steel (SS304)\u003c\/li\u003e \u003cli\u003e Operating pressure: 1.0 bar \/ 15 PSI\u003c\/li\u003e \u003cli\u003e Max pressure: 2.0 bar \/ 30 PSI\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e \u003c\/p\u003e \u003cp\u003e The tank comes with insulation jacket, stainless steel butterfly valve and the necessary piping and clamps\/gaskets.\u003c\/p\u003e \u003cp\u003e For more detailed information and user manual, please visit \u003ca href=\"https:\/\/docs.brewtools.com\/\" target=\"_blank\"\u003edocs.brewtools.com\u003c\/a\u003e\u003c\/p\u003e","brand":"BrewTools","offers":[{"title":"Default Title","offer_id":51917974667553,"sku":"BT1401","price":1973.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/7521\/2321\/files\/62467.png?v=1760501816"},{"product_id":"brewtools-brite-150-118369-gallon-capacity-tank","title":"Brewtools | Brite 150 | 11.8-36.9 Gallon Capacity Brite Tank","description":"\u003cul\u003e \u003cli\u003e Storage, packaging, and finishing tanks made for ambitious homebrewers and small breweries\u003c\/li\u003e \u003cli\u003e Cooling jacket welded to the vertical walls of the tank provide superior cooling capabilities compared to in-solution cooling coils\u003c\/li\u003e \u003cli\u003e Made from stainless steel throughout with Brewtools' proprietary PureBlast™ surface—no passivation required, simply rinse with warm water before your first use\u003c\/li\u003e \u003cli\u003e Pressure rated to 30 PSI so you can safely carbonate and pressure transfer finished beer to kegs with virtually no oxygen pickup\u003c\/li\u003e \u003cli\u003e All valves, fittings, and gaskets come included\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e Brewtools Brite Tanks are storage, packaging, and finishing tanks made for ambitious homebrewers and small breweries. As part of the Brewtools identity, they've explored new techniques and solutions. This has resulted in a series of high-end tanks with new features and a lot of possibilities.\u003c\/p\u003e \u003cp\u003e \u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e Brewtools PureBlast™ surface inside and out which eliminate the use of wax and polishing compounds and does not require passivation.\u003c\/li\u003e \u003cli\u003e Cooling jacket in the vertical walls offers efficient cooling without the hassle of cleaning a spiral.\u003c\/li\u003e \u003cli\u003e Many options for connecting accessories like sensors, carb. stones and other accessories.\u003c\/li\u003e \u003cli\u003e Pressure rated for 2 bar \/ 30 PSI.\u003c\/li\u003e \u003cli\u003e 8\" TC port on top for easy access.\u003c\/li\u003e \u003cli\u003e 2\" TC dump valve\u003c\/li\u003e \u003cli\u003e 3x 1.5\" DN32 ports (1 on the back) + 1x TC34mm port for sample valve\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e Brewtools Brite Tanks are designed and manufactured with special attention to safety and quality.\u003c\/p\u003e \u003cp\u003e They are tested and certified according to the requirements for PED 2014\/68\/EU by a third party.\u003c\/p\u003e \u003cp\u003e \u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e Height without accessories: 44.8\"\u003c\/li\u003e \u003cli\u003e Packaging size: 42.5\" (h) x 23.6\" (w) x 23.6 (d)\u003c\/li\u003e \u003cli\u003e Net weight: TBD\u003c\/li\u003e \u003cli\u003e Gross weight: TBD\u003c\/li\u003e \u003cli\u003e Tank diameter (inside): 19.6\" Ø\u003c\/li\u003e \u003cli\u003e Gross volume: 40.6 gallons\u003c\/li\u003e \u003cli\u003e Max rec. volume: 36.9 gallons\u003c\/li\u003e \u003cli\u003e Min rec. volume: 11.8 gallons\u003c\/li\u003e \u003cli\u003e Material: 1.5mm stainless steel (SS304)\u003c\/li\u003e \u003cli\u003e Operating pressure: 1.0 bar \/ 15 PSI\u003c\/li\u003e \u003cli\u003e Max pressure: 2.0 bar \/ 30 PSI\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e \u003c\/p\u003e \u003cp\u003e The tank comes with insulation jacket, stainless steel butterfly valve and the necessary piping and clamps\/gaskets.\u003c\/p\u003e \u003cp\u003e For more detailed information and user manual, please visit \u003ca href=\"https:\/\/docs.brewtools.com\/\" target=\"_blank\"\u003edocs.brewtools.com\u003c\/a\u003e\u003c\/p\u003e","brand":"BrewTools","offers":[{"title":"Default Title","offer_id":51917974700321,"sku":"BT1402","price":2344.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/7521\/2321\/files\/62469.png?v=1760501818"},{"product_id":"brewtools-brite-300-184726-gallon-capacity-tank","title":"Brewtools | Brite 300 | 18.4-72.6 Gallon Capacity Brite Tank","description":"\u003cul\u003e \u003cli\u003e Storage, packaging, and finishing tanks made for ambitious homebrewers and small breweries\u003c\/li\u003e \u003cli\u003e Cooling jacket welded to the vertical walls of the tank provide superior cooling capabilities compared to in-solution cooling coils\u003c\/li\u003e \u003cli\u003e Made from stainless steel throughout with Brewtools' proprietary PureBlast™ surface—no passivation required, simply rinse with warm water before your first use\u003c\/li\u003e \u003cli\u003e Pressure rated to 30 PSI so you can safely carbonate and pressure transfer finished beer to kegs with virtually no oxygen pickup\u003c\/li\u003e \u003cli\u003e All valves, fittings, and gaskets come included\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e Brewtools Brite Tanks are storage, packaging, and finishing tanks made for ambitious homebrewers and small breweries. As part of the Brewtools identity, they've explored new techniques and solutions. This has resulted in a series of high-end tanks with new features and a lot of possibilities.\u003c\/p\u003e \u003cp\u003e \u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e Brewtools PureBlast™ surface inside and out which eliminate the use of wax and polishing compounds and does not require passivation.\u003c\/li\u003e \u003cli\u003e Cooling jacket in the vertical walls offers efficient cooling without the hassle of cleaning a spiral.\u003c\/li\u003e \u003cli\u003e Many options for connecting accessories like sensors, carb. stones and other accessories.\u003c\/li\u003e \u003cli\u003e Pressure rated for 2 bar \/ 30 PSI.\u003c\/li\u003e \u003cli\u003e 8\" TC port on top for easy access.\u003c\/li\u003e \u003cli\u003e 2\" TC dump valve\u003c\/li\u003e \u003cli\u003e 3x 1.5\" DN32 ports (1 on the back) + 1x TC34mm port for sample valve\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e Brewtools Brite Tanks are designed and manufactured with special attention to safety and quality.\u003c\/p\u003e \u003cp\u003e They are tested and certified according to the requirements for PED 2014\/68\/EU by a third party.\u003c\/p\u003e \u003cp\u003e \u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e Height without accessories: 55.5\"\u003c\/li\u003e \u003cli\u003e Packaging size: 52.3\" (h) x 28.3\" (w) x 28.3\" (d)\u003c\/li\u003e \u003cli\u003e Net weight: TBD\u003c\/li\u003e \u003cli\u003e Gross weight: TBD\u003c\/li\u003e \u003cli\u003e Tank diameter (inside): 23.6\" Ø\u003c\/li\u003e \u003cli\u003e Gross volume: 79.2 gallons\u003c\/li\u003e \u003cli\u003e Max rec. volume: 72.6 gallons\u003c\/li\u003e \u003cli\u003e Min rec. volume: 18.4 gallons\u003c\/li\u003e \u003cli\u003e Material: 1.5mm stainless steel (SS304)\u003c\/li\u003e \u003cli\u003e Operating pressure: 1.0 bar \/ 15 PSI\u003c\/li\u003e \u003cli\u003e Max pressure: 2.0 bar \/ 30 PSI\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e \u003c\/p\u003e \u003cp\u003e The tank comes with insulation jacket, stainless steel butterfly valve and the necessary piping and clamps\/gaskets.\u003c\/p\u003e \u003cp\u003e For more detailed information and user manual, please visit \u003ca href=\"https:\/\/docs.brewtools.com\/\" target=\"_blank\"\u003edocs.brewtools.com\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e \u003cem\u003e\u003cstrong\u003ePlease Note: Example photo of Brite 150 model shown.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e","brand":"BrewTools","offers":[{"title":"Default Title","offer_id":51917974733089,"sku":"BT1403","price":3454.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/7521\/2321\/files\/62471.png?v=1760501821"},{"product_id":"brewtools-brite-40-light-52105-gallon-capacity-tank","title":"Brewtools | Brite 40 Light | 5.2-10.5 Gallon Capacity Brite Tank","description":"\u003cul\u003e \u003cli\u003e Brite Light offers the same tank body as the standard Brewtools Brite Tank with a slight difference in included accessories for a more affordable price\u003c\/li\u003e \u003cli\u003e Storage, packaging, and finishing tanks made for ambitious homebrewers and small breweries\u003c\/li\u003e \u003cli\u003e Cooling jacket welded to the vertical walls of the tank provide superior cooling capabilities compared to in-solution cooling coils\u003c\/li\u003e \u003cli\u003e Made from stainless steel throughout with Brewtools' proprietary PureBlast™ surface—no passivation required, simply rinse with warm water before your first use\u003c\/li\u003e \u003cli\u003e Pressure rated to 30 PSI so you can safely carbonate and pressure transfer finished beer to kegs with virtually no oxygen pickup\u003c\/li\u003e \u003cli\u003e All valves, fittings, and gaskets come included\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e Brite Light is the same tank body as the standard Brewtools Brite Tank, but with a different pressure relief valve and some parts made from Polyketone (POK), which vastly reduces cost without compromising the user experience for smaller tanks. Brite Light can be upgraded to a standard brite tank where you prefer.\u003c\/p\u003e \u003cp\u003e \u003cstrong\u003eKey Differences:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e CleanCore butterfly valve made from Polyketone\u003c\/li\u003e \u003cli\u003e Barbed blow-off PRV \u003cul\u003e \u003cli\u003e Can be set to open for blow-off\u003c\/li\u003e \u003cli\u003e Also acts as 2 bar \/ 30 psi safety valve\u003c\/li\u003e \u003c\/ul\u003e \u003c\/li\u003e \u003cli\u003e Pushfit sample valve \u003cul\u003e \u003cli\u003e Compatible with optional Push-fit Coil and Adapter\u003c\/li\u003e \u003c\/ul\u003e \u003c\/li\u003e \u003cli\u003e Polyketone 8” to 3” tri-clamp lid adapter replaces stainless steel adapter\u003c\/li\u003e \u003cli\u003e Does not include neoprene insulation jacket\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e \u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e Brewtools PureBlast™ surface inside and out which eliminate the use of wax and polishing compounds and does not require passivation.\u003c\/li\u003e \u003cli\u003e Cooling jacket in the vertical walls offers efficient cooling without the hassle of cleaning a spiral.\u003c\/li\u003e \u003cli\u003e Many options for connecting accessories like sensors, carb. stones and other accessories.\u003c\/li\u003e \u003cli\u003e Pressure rated for 2 bar \/ 30 PSI.\u003c\/li\u003e \u003cli\u003e 8\" TC port on top for easy access.\u003c\/li\u003e \u003cli\u003e 2\" TC dump valve\u003c\/li\u003e \u003cli\u003e 3x 1.5\" DN32 ports (1 on the back) + 1x TC34mm port for sample valve\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e Brewtools Brite Tanks are designed and manufactured with special attention to safety and quality.\u003c\/p\u003e \u003cp\u003e They are tested and certified according to the requirements for PED 2014\/68\/EU by a third party.\u003c\/p\u003e \u003cp\u003e \u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e Height without accessories: 28.3\" (72 cm)\u003c\/li\u003e \u003cli\u003e Packaging size: 25.1\" (h) x 19.6\" (w) x 19.6\" (d)\u003c\/li\u003e \u003cli\u003e Net weight: TBD\u003c\/li\u003e \u003cli\u003e Gross weight: TBD\u003c\/li\u003e \u003cli\u003e Tank diameter (inside): 15.7\" Ø\u003c\/li\u003e \u003cli\u003e Gross volume: 12.1 gallons\u003c\/li\u003e \u003cli\u003e Max rec. volume: 10.5 gallons\u003c\/li\u003e \u003cli\u003e Min rec. volume: 5.2 gallons\u003c\/li\u003e \u003cli\u003e Material: 1.5mm stainless steel (SS304)\u003c\/li\u003e \u003cli\u003e Operating pressure: 1.0 bar \/ 15 PSI\u003c\/li\u003e \u003cli\u003e Max pressure: 2.0 bar \/ 30 PSI\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e \u003c\/p\u003e \u003cp\u003e The Light version of the tank does not include the insulation jacket, and has the Brewtools CleanCore butterfly valve and the necessary piping and clamps\/gaskets.\u003c\/p\u003e \u003cp\u003e For more detailed information and user manual, please visit \u003ca href=\"https:\/\/docs.brewtools.com\/\" target=\"_blank\"\u003edocs.brewtools.com\u003c\/a\u003e\u003c\/p\u003e","brand":"BrewTools","offers":[{"title":"Default Title","offer_id":51917974765857,"sku":"BT1404","price":1480.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/7521\/2321\/files\/62473.png?v=1760501823"},{"product_id":"brewtools-brite-80-light-52198-gallon-capacity-tank","title":"Brewtools | Brite 80 Light | 5.2-19.8 Gallon Capacity Brite Tank","description":"\u003cp\u003e\r\n\t\u003cstrong\u003eDue to high demand, this item is currently out of stock. Be the first to receive your items by placing a \u003cspan style=\"background-color:#ffff00;\"\u003epre-order\u003c\/span\u003e today. We will automatically ship this to you when we receive more inventory.\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\t\u003cli\u003e\r\n\t\tBrite Light offers the same tank body as the standard Brewtools Brite Tank with a slight difference in included accessories for a more affordable price\u003c\/li\u003e\r\n\t\u003cli\u003e\r\n\t\tStorage, packaging, and finishing tanks made for ambitious homebrewers and small breweries\u003c\/li\u003e\r\n\t\u003cli\u003e\r\n\t\tCooling jacket welded to the vertical walls of the tank provide superior cooling capabilities compared to in-solution cooling coils\u003c\/li\u003e\r\n\t\u003cli\u003e\r\n\t\tMade from stainless steel throughout with Brewtools' proprietary PureBlast™ surface—no passivation required, simply rinse with warm water before your first use\u003c\/li\u003e\r\n\t\u003cli\u003e\r\n\t\tPressure rated to 30 PSI so you can safely carbonate and pressure transfer finished beer to kegs with virtually no oxygen pickup\u003c\/li\u003e\r\n\t\u003cli\u003e\r\n\t\tAll valves, fittings, and gaskets come included\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\r\n\tBrite Light is the same tank body as the standard Brewtools Brite Tank, but with a different pressure relief valve and some parts made from Polyketone (POK), which vastly reduces cost without compromising the user experience for smaller tanks. Brite Light can be upgraded to a standard brite tank where you prefer.\u003c\/p\u003e\r\n\u003cp\u003e\r\n\t\u003cstrong\u003eKey Differences:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\t\u003cli\u003e\r\n\t\tCleanCore butterfly valve made from Polyketone\u003c\/li\u003e\r\n\t\u003cli\u003e\r\n\t\tBarbed blow-off PRV\r\n\t\t\u003cul\u003e\r\n\t\t\t\u003cli\u003e\r\n\t\t\t\tCan be set to open for blow-off\u003c\/li\u003e\r\n\t\t\t\u003cli\u003e\r\n\t\t\t\tAlso acts as 2 bar \/ 30 psi safety valve\u003c\/li\u003e\r\n\t\t\u003c\/ul\u003e\r\n\t\u003c\/li\u003e\r\n\t\u003cli\u003e\r\n\t\tPushfit sample valve\r\n\t\t\u003cul\u003e\r\n\t\t\t\u003cli\u003e\r\n\t\t\t\tCompatible with optional Push-fit Coil and Adapter\u003c\/li\u003e\r\n\t\t\u003c\/ul\u003e\r\n\t\u003c\/li\u003e\r\n\t\u003cli\u003e\r\n\t\tPolyketone 8” to 3” tri-clamp lid adapter replaces stainless steel adapter\u003c\/li\u003e\r\n\t\u003cli\u003e\r\n\t\tDoes not include neoprene insulation jacket\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\r\n\t\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\t\u003cli\u003e\r\n\t\tBrewtools PureBlast™ surface inside and out which eliminate the use of wax and polishing compounds and does not require passivation.\u003c\/li\u003e\r\n\t\u003cli\u003e\r\n\t\tCooling jacket in the vertical walls offers efficient cooling without the hassle of cleaning a spiral.\u003c\/li\u003e\r\n\t\u003cli\u003e\r\n\t\tMany options for connecting accessories like sensors, carb. stones and other accessories.\u003c\/li\u003e\r\n\t\u003cli\u003e\r\n\t\tPressure rated for 2 bar \/ 30 PSI.\u003c\/li\u003e\r\n\t\u003cli\u003e\r\n\t\t8\" TC port on top for easy access.\u003c\/li\u003e\r\n\t\u003cli\u003e\r\n\t\t2\" TC dump valve\u003c\/li\u003e\r\n\t\u003cli\u003e\r\n\t\t3x 1.5\" DN32 ports (1 on the back) + 1x TC34mm port for sample valve\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\r\n\tBrewtools Brite Tanks are designed and manufactured with special attention to safety and quality.\u003c\/p\u003e\r\n\u003cp\u003e\r\n\tThey are tested and certified according to the requirements for PED 2014\/68\/EU by a third party.\u003c\/p\u003e\r\n\u003cp\u003e\r\n\t\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\t\u003cli\u003e\r\n\t\tHeight without accessories: 39.3\"\u003c\/li\u003e\r\n\t\u003cli\u003e\r\n\t\tPackaging size: 36.2\" (h) x 19.6\" (w) x 19.6 (d)\u003c\/li\u003e\r\n\t\u003cli\u003e\r\n\t\tNet weight: TBD\u003c\/li\u003e\r\n\t\u003cli\u003e\r\n\t\tGross weight: TBD\u003c\/li\u003e\r\n\t\u003cli\u003e\r\n\t\tTank diameter (inside): 15.7\" Ø\u003c\/li\u003e\r\n\t\u003cli\u003e\r\n\t\tGross volume: 21.3 gallons\u003c\/li\u003e\r\n\t\u003cli\u003e\r\n\t\tMax rec. volume: 19.8 gallons\u003c\/li\u003e\r\n\t\u003cli\u003e\r\n\t\tMin rec. volume: 5.2 gallons\u003c\/li\u003e\r\n\t\u003cli\u003e\r\n\t\tMaterial: 1.5mm stainless steel (SS304)\u003c\/li\u003e\r\n\t\u003cli\u003e\r\n\t\tOperating pressure: 1.0 bar \/ 15 PSI\u003c\/li\u003e\r\n\t\u003cli\u003e\r\n\t\tMax pressure: 2.0 bar \/ 30 PSI\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\r\n\t \u003c\/p\u003e\r\n\u003cp\u003e\r\n\tThe Light version of the tank does not include the insulation jacket, and has the Brewtools CleanCore butterfly valve and the necessary piping and clamps\/gaskets.\u003c\/p\u003e\r\n\u003cp\u003e\r\n\tFor more detailed information and user manual, please visit \u003ca href=\"https:\/\/docs.brewtools.com\/\" target=\"_blank\"\u003edocs.brewtools.com\u003c\/a\u003e\u003c\/p\u003e\r\n","brand":"BrewTools","offers":[{"title":"Default Title","offer_id":51917974798625,"sku":"BT1405","price":1603.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/7521\/2321\/files\/62475.png?v=1760501825"}],"url":"https:\/\/morebeer.mom\/collections\/fermenters-1.oembed","provider":"MoreBeer!","version":"1.0","type":"link"}