{"title":"Beer Shanks","description":"\u003cp\u003eThe Beer Shank also called a Faucet Shank is a key component of any draft beer despensing system. It's what connects your beer line to your faucet. Most all shanks will come with a nipple for your beer line to connect to, those without a nipple are referred to as a Pass Through. The other main thing to look at when selecting a shank is it's lenth. Depending on your application you might need a long or a short shank. For instance a shank that fits in a draft tower would not normally be used in a converted fridge\/freezer (keezer) build that requires fitting through the wooden collar or fridge door. We offer a wide selection of beer shanks that come in various legnths to fit any draft beer dispensing project you are working on.\u003c\/p\u003e","products":[{"product_id":"beer-faucet-shank-stainless-4","title":"Beer Faucet Shank (Stainless) - 4 in.","description":"\u003cp\u003e This is the same shank that is used in our D1245A, but without the nipple and hex nut. This gives you the freedom to choose the size and style of tailpiece that fits your needs, as well as the type of hex nut and shank collar you prefer. Check below for available tailpieces. Be sure to add a gasket to use with your chosen tailpiece and hex nut.\u003c\/p\u003e \u003cp\u003e \u003cstrong\u003eDimensions:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e 4-1\/8\" - Shank Length\u003c\/li\u003e \u003cli\u003e 3\" - Thread Length\u003c\/li\u003e \u003cli\u003e 2-3\/4\" - Pass Through Length\u003c\/li\u003e \u003c\/ul\u003e","brand":"Generic","offers":[{"title":"Default Title","offer_id":51912954446113,"sku":"ZD1245ASHANK","price":22.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/7521\/2321\/files\/42439.png?v=1760671832"},{"product_id":"beer-faucet-shank-4-304-stainless-steel-includes-plastic-collar","title":"Beer Faucet Shank | 4\" | 304 Stainless Steel | Includes Plastic Collar","description":"\u003cdiv\u003e\r\n\tSerious homebrewers want only the best hardware touching their brew to prevent “off” flavors. This beer faucet shank is made from high quality 304 stainless steel. \u003c\/div\u003e\r\n\u003cdiv\u003e\r\n\t \u003c\/div\u003e\r\n\u003cdiv\u003e\r\n\tThis shank is sold as a complete kit and ready to install--just add tubing and a hose clamp. It comes with a back nut, plastic collar, hex nut, and a 1\/4\" barb. Requires a 1\" hole saw for installation. Due to the length of the back nut and collar, the total wall width the shank can bridge once installed is about 2 3\/4\".\u003c\/div\u003e\r\n\u003cdiv\u003e\r\n\t\u003cbr\u003e\r\n\t\u003cp\u003e\r\n\t\t\u003cstrong\u003eDimensions:\u003c\/strong\u003e\u003c\/p\u003e\r\n\t\u003cul\u003e\r\n\t\t\u003cli\u003e\r\n\t\t\t5-1\/4\" - Total Length (Tip to Tip)\u003c\/li\u003e\r\n\t\t\u003cli\u003e\r\n\t\t\t4-1\/4\" - Shank Length (Without Nut \u0026amp; Nipple)\u003c\/li\u003e\r\n\t\t\u003cli\u003e\r\n\t\t\t3\" - Thread Length\u003c\/li\u003e\r\n\t\t\u003cli\u003e\r\n\t\t\t2-3\/4\" - Pass Through Length\u003c\/li\u003e\r\n\t\u003c\/ul\u003e\r\n\u003c\/div\u003e\r\n\u003cp\u003e\r\n\t \u003c\/p\u003e\r\n","brand":"Generic","offers":[{"title":"Default Title","offer_id":52260510597409,"sku":"D1245A","price":27.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/7521\/2321\/files\/42686.png?v=1776708437"},{"product_id":"beer-faucet-shank-55-welded-316-barb-includes-plastic-collar","title":"Beer Faucet Shank | 5.5\" | Welded 3\/16\" Barb | Includes Plastic Collar","description":"\u003cdiv\u003e\r\n\tFaucet shanks allow you to mount a draft faucet just about anywhere. Typically installed in the door or wooden collar of of a converted fridge\/freezer, the front of a cooler, or even in your house’s wall when constructing that ultimate home bar! \u003c\/div\u003e\r\n\u003cdiv\u003e\r\n\t \u003c\/div\u003e\r\n\u003cdiv\u003e\r\n\tOnce installed your beer line connects to the back of the shank and a faucet attaches to the front. Shanks are available in a range of sizes to accommodate mounting on materials of varying thicknesses. \u003c\/div\u003e\r\n\u003cdiv\u003e\r\n\t \u003c\/div\u003e\r\n\u003cdiv\u003e\r\n\tThe shank’s listed size refers to the total length of threaded pipe. Approximately 1 1\/8” are needed to account for the thickness of the finishing collar on the front and the space for the locknut on the back. Please take this into account when sizing the shank for your project.\u003c\/div\u003e\r\n\u003cdiv\u003e\r\n\t \u003c\/div\u003e\r\n\u003cdiv\u003e\r\n\tFeatures a welded 3\/16” barb and includes a glossy black plastic collar and locknut. Requires a 1” hole for installation.\u003c\/div\u003e\r\n\u003cdiv\u003e\r\n\t \u003c\/div\u003e\r\n\u003cdiv\u003e\r\n\t\u003cp\u003e\r\n\t\t\u003cstrong\u003eDimensions:\u003c\/strong\u003e\u003c\/p\u003e\r\n\t\u003cul\u003e\r\n\t\t\u003cli\u003e\r\n\t\t\t6-1\/4\" - Total Length (Tip to Tip)\u003c\/li\u003e\r\n\t\t\u003cli\u003e\r\n\t\t\t5-1\/2\" - Shank Length (Without Nipple)\u003c\/li\u003e\r\n\t\t\u003cli\u003e\r\n\t\t\t4-1\/8\" - Thread Length\u003c\/li\u003e\r\n\t\t\u003cli\u003e\r\n\t\t\t5-1\/4\" - Pass Through Length\u003c\/li\u003e\r\n\t\u003c\/ul\u003e\r\n\u003c\/div\u003e\r\n\u003cp\u003e\r\n\t \u003c\/p\u003e\r\n","brand":"Generic","offers":[{"title":"Default Title","offer_id":52260510630177,"sku":"D1246","price":21.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/7521\/2321\/files\/27340.png?v=1776709372"},{"product_id":"complete-beer-faucet-combo-4-shank-316-barbed-nipple-stainless-tap-handle","title":"Complete Beer Faucet Combo | 4\" Shank | 3\/16\" Barbed Nipple | Stainless Faucet | Tap Handle","description":"\u003cp\u003e\r\n\tInstall a tap where you want it, without the hassle of searching for all the separate components you’ll need. This faucet, knob, and shank combo is a great price, it’s easy to install, and it works and looks great!\u003c\/p\u003e\r\n\u003cdiv\u003e\r\n\t \u003c\/div\u003e\r\n\u003cdiv\u003e\r\n\tThis kit includes the 4\" shank with 3\/16\" nipple, all stainless faucet, and plastic 2.5\" knob.\u003c\/div\u003e\r\n","brand":"Generic","offers":[{"title":"Default Title","offer_id":52260510826785,"sku":"D1255","price":46.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/7521\/2321\/files\/22891.png?v=1769454779"},{"product_id":"complete-beer-faucet-combo-stainless-4-shank-14-barbed-nipple-tap-handle","title":"Complete Beer Faucet Combo | Stainless 4\" Shank | 1\/4\" Barbed Nipple | Stainless Faucet | Tap Handle","description":"\u003cdiv\u003e\r\n\t\u003cp\u003e\r\n\t\tDon’t shop around for separate components when you can get our faucet, shank, and knob combo all in one kit!\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\u003cdiv\u003e\r\n\t \u003c\/div\u003e\r\n\u003cdiv\u003e\r\n\tThis kit includes our Stainless Faucet, Stainless 4\" Shank with 1\/4\" nipple, and a Faucet knob, combined into one. Please note that the actual useable length of the shank will be about 3 5\/8\", due to the hex nut and tailpiece attached to it.\u003c\/div\u003e\r\n","brand":"Generic","offers":[{"title":"Default Title","offer_id":52260510892321,"sku":"D1255S","price":76.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/7521\/2321\/files\/6344.jpg?v=1769454782"},{"product_id":"beer-faucet-shank-tower-stainless-intertap-nukatap","title":"Beer Faucet Shank | Tower Shank | Stainless | Intertap® | NukaTap®","description":"\u003cp\u003e\r\n\tThis shank's small design makes it perfect for attaching a faucet to a tower.  Included on the Intertap towers that we stock but can be used to replace the short shank on any 3\" diameter tower. Made from stainless steel. \u003c\/p\u003e\r\n\u003cp\u003e\r\n\t\u003cem\u003e\u003cstrong\u003ePlease note these shanks are not compatible with Perlick brand faucets.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\r\n\u003cp\u003e\r\n\tKegland Part number: KL01090\u003c\/p\u003e\r\n","brand":"Intertap\/Nukatap","offers":[{"title":"Default Title","offer_id":52260519674145,"sku":"D1239","price":16.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/7521\/2321\/files\/18674.jpg?v=1776708313"},{"product_id":"beer-faucet-shank-25-welded-316-barb-includes-plastic-collar","title":"Beer Faucet Shank | 2.5\" | Welded 5\/16\" Barb | Includes Plastic Collar","description":"\u003cp\u003e\r\n\tComes with a welded 5\/16\" nipple, back nut, and plastic collar. It requires a 1\" hole for installation. When set in place, the shank will only have about 1-1\/4\" of length to pass through your wall or fridge door, due to the length of the collar and back nut.\u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tInstallation note: On a fridge there is generally no coolant lines running through the door but please check to see there are no lines connecting the door and the rest of the refrigerator. To test for coolant lines on a freezer start with a warm freezer then plug the unit in with the lid open. You should be able to see the lines form condensation on the inside of the freezer where there are lines running. Please still use caution when drilling.\u003c\/p\u003e\r\n\u003cp\u003e\r\n\tThe barb size is rounded to 5\/16\" OD (0.31\"). The true size is 7.5mm (0.29\").\u003c\/p\u003e\r\n\u003cp\u003e\r\n\t\u003cstrong\u003eDimensions:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\t\u003cli\u003e\r\n\t\t3-1\/8\" - Total Length (Tip to Tip)\u003c\/li\u003e\r\n\t\u003cli\u003e\r\n\t\t2-1\/2\" - Shank Length (Without Nipple)\u003c\/li\u003e\r\n\t\u003cli\u003e\r\n\t\t1-1\/8\" - Thread Length\u003c\/li\u003e\r\n\t\u003cli\u003e\r\n\t\t1-1\/4\" - Pass Through Length\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n","brand":"Generic","offers":[{"title":"Default Title","offer_id":52260520427809,"sku":"D1241","price":16.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/7521\/2321\/files\/22101.png?v=1769455187"},{"product_id":"beer-faucet-shank-stainless-4-intertap-nukatap","title":"Beer Faucet Shank | Stainless | 4\" | Intertap® | NukaTap®","description":"\u003cdiv\u003e\r\n\tComes with a back nut, plastic collar, hex nut, and a 1\/4\" barb. Requires a 1\" hole saw for installation. When set in place, the shank will only have about 2 1\/2\" of length to pass through your wall or fridge door, due to the length of the collar and back nut.\u003c\/div\u003e\r\n\u003cp\u003e\r\n\t\u003cbr\u003e\r\n\tInstallation note: On a fridge there is generally no coolant lines running through the door but please check to see there are no lines connecting the door and the rest of the refrigerator. To test for coolant lines on a freezer start with a warm freezer then plug the unit in with the lid open. You should be able to see the lines form condensation on the inside of the freezer where there are lines running. Please still use caution when drilling.\u003c\/p\u003e\r\n\u003cp\u003e\r\n\t\u003cstrong\u003eDimensions:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\t\u003cli\u003e\r\n\t\t5-1\/8\" - Total Length (Tip to Tip)\u003c\/li\u003e\r\n\t\u003cli\u003e\r\n\t\t4\" - Shank Length (Without Nut \u0026amp; Barb)\u003c\/li\u003e\r\n\t\u003cli\u003e\r\n\t\t3\" - Thread Length\u003c\/li\u003e\r\n\t\u003cli\u003e\r\n\t\t2-1\/2\" - Pass Through Length\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\r\n\tKegland Part number: KL01113\u003c\/p\u003e\r\n","brand":"Intertap\/Nukatap","offers":[{"title":"Default Title","offer_id":52260520493345,"sku":"D1247","price":36.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/7521\/2321\/files\/18302.jpg?v=1769455189"},{"product_id":"beer-faucet-shank-stainless-2-includes-316-nipple-nut-plastic-collar","title":"Beer Faucet Shank | Stainless | 2\" | Includes 3\/16\" Nipple Back Nut \u0026 Plastic Collar","description":"\u003cp\u003e\r\n\tComes with a 3\/16\" nipple, back nut, and plastic collar. It requires a 1\" hole for installation. When set in place, the shank will only have about 11\/16\" of length to pass through your wall or fridge door, due to the length of the collar and back nut.\u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tInstallation note: On a fridge there is generally no coolant lines running through the door but please check to see there are no lines connecting the door and the rest of the refrigerator. To test for coolant lines on a freezer start with a warm freezer then plug the unit in with the lid open. You should be able to see the lines form condensation on the inside of the freezer where there are lines running. Please still use caution when drilling.\u003c\/p\u003e\r\n\u003cp\u003e\r\n\t\u003cstrong\u003eDimensions:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\t\u003cli\u003e\r\n\t\t3-3\/4\" - Total Length (Tip to Tip)\u003c\/li\u003e\r\n\t\u003cli\u003e\r\n\t\t2-1\/8\" - Shank Length (Without Nut \u0026amp; Nipple)\u003c\/li\u003e\r\n\t\u003cli\u003e\r\n\t\t1-1\/4\" - Thread Length\u003c\/li\u003e\r\n\t\u003cli\u003e\r\n\t\t11\/16\" - Pass Through Length\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n","brand":"Generic","offers":[{"title":"Default Title","offer_id":52260520526113,"sku":"D1241A","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/7521\/2321\/files\/22104.png?v=1769455193"},{"product_id":"beer-faucet-shank-5-stainless-steel-316-nipple-includes-plastic-collar","title":"Beer Faucet Shank | 5\" | Stainless Steel | 3\/16\" Nipple | Includes Plastic Collar","description":"\u003cp\u003e\r\n\tComes with a 3\/16\" nipple, back nut, and plastic collar. It requires a 1\" hole for installation. When set in place, the shank will only have about 4\" of length to pass through your wall or fridge door, due to the length of the collar and back nut.\u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tInstallation note: On a fridge there is generally no coolant lines running through the door but please check to see there are no lines connecting the door and the rest of the refrigerator. To test for coolant lines on a freezer start with a warm freezer then plug the unit in with the lid open. You should be able to see the lines form condensation on the inside of the freezer where there are lines running. Please still use caution when drilling.\u003c\/p\u003e\r\n\u003cp\u003e\r\n\t\u003cstrong\u003eDimensions:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\t\u003cli\u003e\r\n\t\t6-1\/4\" - Total Length (Tip to Tip)\u003c\/li\u003e\r\n\t\u003cli\u003e\r\n\t\t5-1\/8\" - Shank Length (Without Nut \u0026amp; Nipple)\u003c\/li\u003e\r\n\t\u003cli\u003e\r\n\t\t3-3\/4\" - Thread Length\u003c\/li\u003e\r\n\t\u003cli\u003e\r\n\t\t4-5\/8\" - Pass Through Length\u003c\/li\u003e\r\n\t\u003cli\u003e\r\n\t\t3\/16 in. Nipple\u003cbr\u003e\r\n\t\t \u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n","brand":"Generic","offers":[{"title":"Default Title","offer_id":52260520558881,"sku":"D1246A","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/7521\/2321\/files\/21179.png?v=1776709767"},{"product_id":"beer-faucet-shank-55-welded-14-barb-includes-plastic-collar","title":"Beer Faucet Shank | 5.5\" | Welded 1\/4\" Barb | Includes Plastic Collar","description":"\u003cp\u003e\r\n\tThis 6 in. chrome shank comes with a back nut, plastic collar, and a welded 1\/4\" nipple. Requires a 1\" hole saw for installation.\u003cbr\u003e\r\n\t\u003cbr\u003e\r\n\tInstallation note: On a fridge there is generally no coolant lines running through the door but please check to see there are no lines connecting the door and the rest of the refrigerator. To test for coolant lines on a freezer start with a warm freezer then plug the unit in with the lid open. You should be able to see the lines form condensation on the inside of the freezer where there are lines running. Please still use caution when drilling. This is a Chrome Plated Brass unit.\u003c\/p\u003e\r\n\u003cp\u003e\r\n\t\u003cstrong\u003eDimensions:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\t\u003cli\u003e\r\n\t\t6-1\/4\" - Total Length (Tip to Tip)\u003c\/li\u003e\r\n\t\u003cli\u003e\r\n\t\t5-1\/2\" - Shank Length (Without Nut \u0026amp; Nipple)\u003c\/li\u003e\r\n\t\u003cli\u003e\r\n\t\t4-1\/8\" - Thread Length\u003c\/li\u003e\r\n\t\u003cli\u003e\r\n\t\t5-1\/4\" - Pass Through Length\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n","brand":"Generic","offers":[{"title":"Default Title","offer_id":52260521345313,"sku":"D1246C","price":21.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/7521\/2321\/files\/20758.jpg?v=1776709167"},{"product_id":"beer-faucet-shank-tower-stainless-duotight-compatible-barb-intertap-nukatap","title":"Beer Faucet Shank | Tower Shank | Stainless | Duotight Compatible Barb | Intertap® | NukaTap®","description":"\u003cp\u003e\r\n\tOutfit any 3\" diameter draft tower with these stainless steel Intertap Tower Shanks with Duotight compatible tailpiece. The 1\/4\" barb pairs perfectly with the Duotight 6.35 mm x 8 mm reducer (DUO100), allowing you to quickly and easily connect 8 mm OD EVABarrier draft line (D1717 \u0026amp; D1718).\u003c\/p\u003e\r\n\u003cp\u003e\r\n\t\u003cem\u003eThe Duotight fitting is sold separately and can be found below under \"You Might Also Need\".\u003c\/em\u003e\u003c\/p\u003e\r\n\u003cp\u003e\r\n\t\u003cem\u003e\u003cstrong\u003ePlease note these shanks are not compatible with Perlick flow control faucets.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\r\n\u003cp\u003e\r\n\tKegland Part number: KL01137\u003c\/p\u003e\r\n","brand":"Intertap\/Nukatap","offers":[{"title":"Default Title","offer_id":52260533764385,"sku":"D1242","price":19.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/7521\/2321\/files\/34631.png?v=1769455670"},{"product_id":"beer-faucet-shank-stainless-6-intertap-nukatap","title":"Beer Faucet Shank | Stainless | 6\" | Intertap® | NukaTap®","description":"\u003cp\u003e\r\n\tComes with a back nut, plastic collar, hex nut, and a 1\/4\" barb. Requires a 1\" hole saw for installation. When set in place, the shank will only have about 4-1\/2\" of length to pass through your wall or fridge door, due to the length of the collar and back nut.\u003c\/p\u003e\r\n\u003cp\u003e\r\n\t\u003cbr\u003e\r\n\tInstallation note: On a fridge there is generally no coolant lines running through the door but please check to see there are no lines connecting the door and the rest of the refrigerator. To test for coolant lines on a freezer start with a warm freezer then plug the unit in with the lid open. You should be able to see the lines form condensation on the inside of the freezer where there are lines running. Please still use caution when drilling.\u003c\/p\u003e\r\n\u003cp\u003e\r\n\t\u003cstrong\u003eDimensions:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\t\u003cli\u003e\r\n\t\t7-1\/8\" - Total Length (Tip to Tip)\u003c\/li\u003e\r\n\t\u003cli\u003e\r\n\t\t6\" - Shank Length (Without Nut \u0026amp; Barb)\u003c\/li\u003e\r\n\t\u003cli\u003e\r\n\t\t5\" - Thread Length\u003c\/li\u003e\r\n\t\u003cli\u003e\r\n\t\t4-1\/2\" - Pass Through Length\u003cbr\u003e\r\n\t\t \u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\r\n\tKegland Part number: KL01120\u003c\/p\u003e\r\n","brand":"Intertap\/Nukatap","offers":[{"title":"Default Title","offer_id":52260581507361,"sku":"D1256","price":43.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/7521\/2321\/files\/35503.png?v=1776708148"},{"product_id":"komosreg-beer-faucet-shank-stainless-cobra-tower","title":"KOMOS® Beer Faucet Shank (Stainless) - Cobra Tower Shank","description":"\u003cp\u003e\r\n\tThese stainless short shanks are typically used for attaching faucets to a KOMOS® Cobra style draft tower. The threaded section measures 25mm in length (0.98\").\u003c\/p\u003e\r\n\u003cp\u003e\r\n\t \u003c\/p\u003e\r\n\u003cdiv\u003e\r\n\t\u003cstrong\u003ePlease Note:\u003c\/strong\u003e When installing Cobra Tower Shanks onto the tower, some exposed threading is normal due to the tower's design and does not impact sealing performance. For a cleaner, professional aesthetic, we recommend using a shank spacer to cover the threads and provide a flush finish against the tower surface.\u003c\/div\u003e\r\n\u003cdiv\u003e\r\n\t \u003c\/div\u003e\r\n\u003cp\u003e\r\n\t \u003c\/p\u003e\r\n","brand":"KOMOS","offers":[{"title":"Default Title","offer_id":52260582359329,"sku":"D1365","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/7521\/2321\/files\/36556.png?v=1776708298"},{"product_id":"beer-faucet-shank-tower-matte-black-duotight-compatible-barb-intertap-nukatap","title":"Beer Faucet Shank | Tower Shank | Matte Black | Duotight Compatible Barb | Intertap® | NukaTap®","description":"\u003cp\u003e This tower shank with Matte Black finish matches perfectly with the NukaTap Stealth Bomber faucet and features a Duotight compatible tailpiece. The 1\/4\" barb pairs with the Duotight 6.35 mm x 8 mm reducer (DUO10), allowing you to quickly and easily connect 8 mm OD EVABarrier draft line (D1717 \u0026amp; D1718).\u003cbr\u003e \u003c\/p\u003e \u003cp\u003e \u003cem\u003eThe Duotight fitting is sold separately and can be found below under \"You Might Also Need\".\u003c\/em\u003e\u003c\/p\u003e \u003cp\u003e \u003cem\u003e\u003cstrong\u003ePlease note these shanks are not compatible with Perlick brand faucets.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e \u003cp\u003e KegLand Part Number: KL20084\u003c\/p\u003e","brand":"Intertap\/Nukatap","offers":[{"title":"Default Title","offer_id":52260584194337,"sku":"D1586","price":16.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/7521\/2321\/files\/61925.png?v=1769458426"},{"product_id":"beer-faucet-shank-stainless-4-8-mm-duotight-adapter-intertap-nukatap","title":"Beer Faucet Shank | Stainless | 4\" | 8 mm Duotight Adapter | Intertap® | NukaTap®","description":"\u003cp\u003e Comes with a back nut, plastic collar, hex nut, and 8 mm Duotight Adapter compatible with EVABarrier 8 mm OD Tubing (D1717 \u0026amp; D1718). Requires a 1\" hole saw for installation. When set in place, the shank will only have about 2 1\/2\" of length to pass through your wall or fridge door, due to the length of the collar and back nut.\u003c\/p\u003e \u003cp\u003e Installation note: On a fridge there is generally no coolant lines running through the door but please check to see there are no lines connecting the door and the rest of the refrigerator. To test for coolant lines on a freezer start with a warm freezer then plug the unit in with the lid open. You should be able to see the lines form condensation on the inside of the freezer where there are lines running. Please still use caution when drilling.\u003c\/p\u003e \u003cp\u003e \u003cstrong\u003eDimensions:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e 5-1\/8\" - Total Length (Tip to Tip)\u003c\/li\u003e \u003cli\u003e 4\" - Shank Length (Without Nut \u0026amp; Barb)\u003c\/li\u003e \u003cli\u003e 3\" - Thread Length\u003c\/li\u003e \u003cli\u003e 2-1\/2\" - Pass Through Length\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e Kegland Part number: KL11945\u003c\/p\u003e","brand":"Intertap\/Nukatap","offers":[{"title":"Default Title","offer_id":52260596187425,"sku":"D1258","price":36.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/7521\/2321\/files\/46528.png?v=1776710485"},{"product_id":"beer-faucet-shank-stainless-6-8-mm-duotight-adapter-intertap-nukatap","title":"Beer Faucet Shank | Stainless | 6 in. | 8 mm Duotight Adapter | Intertap® | NukaTap®","description":"\u003cp\u003e\r\n\tComes with a back nut, plastic collar, hex nut, and 8 mm Duotight Adapter compatible with EVABarrier 8 mm OD Tubing (D1717 \u0026amp; D1718). Requires a 1\" hole saw for installation. When set in place, the shank will only have about 4-1\/2\" of length to pass through your wall or fridge door, due to the length of the collar and back nut.\u003c\/p\u003e\r\n\u003cp\u003e\r\n\tInstallation note: On a fridge there is generally no coolant lines running through the door but please check to see there are no lines connecting the door and the rest of the refrigerator. To test for coolant lines on a freezer start with a warm freezer then plug the unit in with the lid open. You should be able to see the lines form condensation on the inside of the freezer where there are lines running. Please still use caution when drilling.\u003c\/p\u003e\r\n\u003cp\u003e\r\n\t\u003cstrong\u003eDimensions:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\t\u003cli\u003e\r\n\t\t7-1\/8\" - Total Length (Tip to Tip)\u003c\/li\u003e\r\n\t\u003cli\u003e\r\n\t\t6\" - Shank Length (Without Nut \u0026amp; Barb)\u003c\/li\u003e\r\n\t\u003cli\u003e\r\n\t\t5\" - Thread Length\u003c\/li\u003e\r\n\t\u003cli\u003e\r\n\t\t4-1\/2\" - Pass Through Length\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\r\n\tKegland Part number: KL11952\u003c\/p\u003e\r\n\u003cp\u003e\r\n\t \u003c\/p\u003e\r\n","brand":"Intertap\/Nukatap","offers":[{"title":"Default Title","offer_id":52260597563681,"sku":"D1301","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/7521\/2321\/files\/46459.png?v=1776708536"},{"product_id":"komosreg-stainless-beer-faucet-shank-3-hex-nut-barb","title":"KOMOS® | Stainless Beer Faucet Shank | 3 in. | Hex Nut \u0026 Barb","description":"\u003cp\u003e Stainless steel shank comes with a back nut, plastic collar, and a 3\/16\" tailpiece with hex nut and gasket. If desired, the barb can be removed and swapped for a different size or replaced with a Duotight x Beer Thread Adapter. This size of beer shank is a popular choice for building your own custom draft system. Typically installed in the door of a refrigerator or the wooden collar of a converted chest freezer. \u003c\/p\u003e \u003cp\u003e The shank’s listed size refers to the total length of threaded pipe. Approximately 1-1\/8” are needed to account for the thickness of the finishing collar on the front and the space for the locknut on the back. Please take this into account when sizing the shank for your project.\u003c\/p\u003e \u003cp\u003e \u003cstrong\u003eInstallation Note:\u003c\/strong\u003e On a fridge there are generally no coolant lines running through the door but please check to see there are no lines connecting the door and the rest of the refrigerator. To test for coolant lines on a freezer start with a warm freezer then plug the unit in with the lid open. You should be able to see the lines form condensation on the inside of the freezer where there are lines running. Please still use caution when drilling.\u003c\/p\u003e \u003cp\u003e \u003cstrong\u003eDimensions:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e 4-1\/4\" - Total Length (Tip to Tip)\u003c\/li\u003e \u003cli\u003e 3-1\/8\" - Shank Length (Without Nut \u0026amp; Nipple)\u003c\/li\u003e \u003cli\u003e 2-1\/4\" - Thread Length\u003c\/li\u003e \u003cli\u003e 1-3\/4\" - Pass Through Length\u003c\/li\u003e \u003cli\u003e 3\/16\" Nipple\u003c\/li\u003e \u003c\/ul\u003e","brand":"KOMOS","offers":[{"title":"Default Title","offer_id":52260648976673,"sku":"D2528","price":21.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/7521\/2321\/files\/52897.png?v=1769459025"},{"product_id":"komos-beer-faucet-shank-35-welded-barb","title":"KOMOS® | Beer Faucet Shank | 3.5 in. | Welded Barb","description":"\u003cp\u003e\r\n\tChrome plated brass shank comes with a back nut, plastic collar, and a welded 3\/16\" nipple. This beer shank is a popular choice for building your own custom draft system. Typically installed in the door of a refrigerator or the wooden collar of a converted chest freezer. \u003c\/p\u003e\r\n\u003cp\u003e\r\n\tThe shank’s listed size refers to the total length of threaded pipe. Approximately 1-1\/8” are needed to account for the thickness of the finishing collar on the front and the space for the locknut on the back. Please take this into account when sizing the shank for your project.\u003c\/p\u003e\r\n\u003cp\u003e\r\n\t\u003cstrong\u003eInstallation Note:\u003c\/strong\u003e On a fridge there are generally no coolant lines running through the door but please check to see there are no lines connecting the door and the rest of the refrigerator. To test for coolant lines on a freezer start with a warm freezer then plug the unit in with the lid open. You should be able to see the lines form condensation on the inside of the freezer where there are lines running. Please still use caution when drilling.\u003c\/p\u003e\r\n\u003cp\u003e\r\n\t\u003cstrong\u003eDimensions:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\t\u003cli\u003e\r\n\t\t4-1\/4\" - Total Length (Tip to Tip)\u003c\/li\u003e\r\n\t\u003cli\u003e\r\n\t\t3-1\/2\" - Shank Length (Without Nipple)\u003c\/li\u003e\r\n\t\u003cli\u003e\r\n\t\t2-5\/8\" - Thread Length\u003c\/li\u003e\r\n\t\u003cli\u003e\r\n\t\t2-3\/8\" - Pass Through Length\u003c\/li\u003e\r\n\t\u003cli\u003e\r\n\t\t3\/16'' - Bore\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n","brand":"KOMOS","offers":[{"title":"Default Title","offer_id":52260649009441,"sku":"D2529","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/7521\/2321\/files\/53404.png?v=1776711605"},{"product_id":"beer-faucet-shank-pass-stainless-3","title":"Beer Faucet Shank | Pass Through | Stainless | 3\"","description":"\u003cp\u003e\r\n\tYou can use pass through shanks for beer entry through the back side of a cooler. Drill a 1\" hole through the cooler, insert the shank, and use the two attached nuts to tighten up on the cooler. You will need nuts and nipples of the size line you are working with as well as hose clamps. We do not use pass through shanks in our boxes because we drill a hole that is same size as the line so we can pull it back in when we are traveling. However there might be instances where they would be appropriate. Pass through shanks can also be used to put through the side of a refrigerator to pass a gas line through.\u003c\/p\u003e\r\n\u003cp\u003e\r\n\t\u003cstrong\u003eInstallation Note:\u003c\/strong\u003e On a fridge there are generally no coolant lines running through the door but please check to see there are no lines connecting the door and the rest of the refrigerator. To test for coolant lines on a freezer start with a warm freezer then plug the unit in with the lid open. You should be able to see the lines form condensation on the inside of the freezer where there are lines running. Please still use caution when drilling.\u003c\/p\u003e\r\n\u003cp\u003e\r\n\tThis is a stainless steel shank with chrome plated brass hex nuts.\u003c\/p\u003e\r\n\u003cp\u003e\r\n\t\u003cstrong\u003eDimensions:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\t\u003cli\u003e\r\n\t\t3\" - Shank Length \u003c\/li\u003e\r\n\t\u003cli\u003e\r\n\t\t3\" - Thread Length\u003c\/li\u003e\r\n\t\u003cli\u003e\r\n\t\t1-7\/8\" - Pass Through Length\r\n\t\t\u003cul\u003e\r\n\t\t\t\u003cli\u003e\r\n\t\t\t\tMax length with hex nuts at either end\u003c\/li\u003e\r\n\t\t\t\u003cli\u003e\r\n\t\t\t\t\u003cem\u003eDoes not account for nuts\/nipples you may install\u003c\/em\u003e\n\u003c\/li\u003e\r\n\t\t\u003c\/ul\u003e\r\n\t\u003c\/li\u003e\r\n\t\u003cli\u003e\r\n\t\tMale Beer Thread (5\/8\" BSP)\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n","brand":"Generic","offers":[{"title":"Default Title","offer_id":52260690788641,"sku":"D1921","price":24.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/7521\/2321\/files\/58761.png?v=1769461813"},{"product_id":"beer-faucet-shank-pass-stainless-4","title":"Beer Faucet Shank | Pass Through | Stainless | 4\"","description":"\u003cp\u003e\r\n\tYou can use pass through shanks for beer entry through the back side of a cooler. Drill a 1\" hole through the cooler, insert the shank, and use the two attached nuts to tighten up on the cooler. You will need nuts and nipples of the size line you are working with as well as hose clamps. We do not use pass through shanks in our boxes because we drill a hole that is same size as the line so we can pull it back in when we are traveling. However there might be instances where they would be appropriate. Pass through shanks can also be used to put through the side of a refrigerator to pass a gas line through\u003c\/p\u003e\r\n\u003cp\u003e\r\n\t\u003cstrong\u003eInstallation Note:\u003c\/strong\u003e On a fridge there is generally no coolant lines running through the door but please check to see there are no lines connecting the door and the rest of the refrigerator. To test for coolant lines on a freezer start with a warm freezer then plug the unit in with the lid open. You should be able to see the lines form condensation on the inside of the freezer where there are lines running. Please still use caution when drilling.\u003c\/p\u003e\r\n\u003cp\u003e\r\n\tThis is a stainless steel shank with chrome plated brass hex nuts.\u003c\/p\u003e\r\n\u003cp\u003e\r\n\t\u003cstrong\u003eDimensions:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\t\u003cli\u003e\r\n\t\t4\" - Shank Length\u003c\/li\u003e\r\n\t\u003cli\u003e\r\n\t\t4\" - Thread Length\u003c\/li\u003e\r\n\t\u003cli\u003e\r\n\t\t2-3\/4\" - Pass Through Length\r\n\t\t\u003cul\u003e\r\n\t\t\t\u003cli\u003e\r\n\t\t\t\tMax length with hex nuts at either end\u003c\/li\u003e\r\n\t\t\t\u003cli\u003e\r\n\t\t\t\t\u003cem\u003eDoes not account for nuts\/nipples you may install\u003c\/em\u003e\n\u003c\/li\u003e\r\n\t\t\u003c\/ul\u003e\r\n\t\u003c\/li\u003e\r\n\t\u003cli\u003e\r\n\t\tMale Beer Thread (5\/8\" BSP)\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\r\n\t \u003c\/p\u003e\r\n","brand":"Generic","offers":[{"title":"Default Title","offer_id":52260690821409,"sku":"D1923","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/7521\/2321\/files\/58765.png?v=1776710654"},{"product_id":"beer-faucet-shank-tower-replacement-oring","title":"Beer Faucet Shank | Tower Shank | Replacement O-Ring","description":"\u003cp\u003e\r\n\tReplacement O-ring for beer faucet tower shanks D1239 and D1242.\u003c\/p\u003e\r\n\u003cp\u003e\r\n\tThis O-ring sits underneath the coupling nut of the shank, behind the teeth where the shank connect to the faucet.\u003c\/p\u003e\r\n\u003cp\u003e\r\n\tKegLand Part Number: KL88067\u003c\/p\u003e\r\n","brand":"Intertap\/Nukatap","offers":[{"title":"Default Title","offer_id":52260693213473,"sku":"D1242B","price":2.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/7521\/2321\/files\/61751.png?v=1769461866"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/7521\/2321\/collections\/53404.png?v=1764635332","url":"https:\/\/morebeer.mom\/collections\/beer-shanks.oembed","provider":"MoreBeer!","version":"1.0","type":"link"}